[media] media: move dvb-usb-v2/cypress_firmware.c to media/common

Loading the cypress firmware is not dvb specific and should be common
functionality. Move the source to media/common and make it a standalone
module.
As a result we can remove the dependency on dvb-usb in go7007, which has
nothing to do with dvb.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/common/Kconfig

@@ -16,6 +16,9 @@ config VIDEO_TVEEPROM
 	tristate
 	depends on I2C
 
+config CYPRESS_FIRMWARE
+	tristate "Cypress firmware helper routines"
+
 source "drivers/media/common/b2c2/Kconfig"
 source "drivers/media/common/saa7146/Kconfig"
 source "drivers/media/common/siano/Kconfig"

drivers/media/common/Makefile

@@ -2,3 +2,4 @@ obj-y += b2c2/ saa7146/ siano/
 obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
 obj-$(CONFIG_VIDEO_BTCX)  += btcx-risc.o
 obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
+obj-$(CONFIG_CYPRESS_FIRMWARE) += cypress_firmware.o

drivers/media/usb/dvb-usb-v2/cypress_firmware.c → drivers/media/common/cypress_firmware.c

@@ -8,7 +8,10 @@
  *
  */
 
-#include "dvb_usb.h"
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/firmware.h>
 #include "cypress_firmware.h"
 
 struct usb_cypress_controller {
@@ -30,14 +33,42 @@ static const struct usb_cypress_controller cypress[] = {
 static int usb_cypress_writemem(struct usb_device *udev, u16 addr, u8 *data,
 		u8 len)
 {
-	dvb_usb_dbg_usb_control_msg(udev,
-			0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len);
-
 	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000);
 }
 
-int usbv2_cypress_load_firmware(struct usb_device *udev,
+static int cypress_get_hexline(const struct firmware *fw,
+				struct hexline *hx, int *pos)
+{
+	u8 *b = (u8 *) &fw->data[*pos];
+	int data_offs = 4;
+
+	if (*pos >= fw->size)
+		return 0;
+
+	memset(hx, 0, sizeof(struct hexline));
+	hx->len = b[0];
+
+	if ((*pos + hx->len + 4) >= fw->size)
+		return -EINVAL;
+
+	hx->addr = b[1] | (b[2] << 8);
+	hx->type = b[3];
+
+	if (hx->type == 0x04) {
+		/* b[4] and b[5] are the Extended linear address record data
+		 * field */
+		hx->addr |= (b[4] << 24) | (b[5] << 16);
+	}
+
+	memcpy(hx->data, &b[data_offs], hx->len);
+	hx->chk = b[hx->len + data_offs];
+	*pos += hx->len + 5;
+
+	return *pos;
+}
+
+int cypress_load_firmware(struct usb_device *udev,
 		const struct firmware *fw, int type)
 {
 	struct hexline *hx;
@@ -61,7 +92,7 @@ int usbv2_cypress_load_firmware(struct usb_device *udev,
 
 	/* write firmware to memory */
 	for (;;) {
-		ret = dvb_usbv2_get_hexline(fw, hx, &pos);
+		ret = cypress_get_hexline(fw, hx, &pos);
 		if (ret < 0)
 			goto err_kfree;
 		else if (ret == 0)
@@ -94,39 +125,7 @@ int usbv2_cypress_load_firmware(struct usb_device *udev,
 	kfree(hx);
 	return ret;
 }
-EXPORT_SYMBOL(usbv2_cypress_load_firmware);
-
-int dvb_usbv2_get_hexline(const struct firmware *fw, struct hexline *hx,
-		int *pos)
-{
-	u8 *b = (u8 *) &fw->data[*pos];
-	int data_offs = 4;
-
-	if (*pos >= fw->size)
-		return 0;
-
-	memset(hx, 0, sizeof(struct hexline));
-	hx->len = b[0];
-
-	if ((*pos + hx->len + 4) >= fw->size)
-		return -EINVAL;
-
-	hx->addr = b[1] | (b[2] << 8);
-	hx->type = b[3];
-
-	if (hx->type == 0x04) {
-		/* b[4] and b[5] are the Extended linear address record data
-		 * field */
-		hx->addr |= (b[4] << 24) | (b[5] << 16);
-	}
-
-	memcpy(hx->data, &b[data_offs], hx->len);
-	hx->chk = b[hx->len + data_offs];
-	*pos += hx->len + 5;
-
-	return *pos;
-}
-EXPORT_SYMBOL(dvb_usbv2_get_hexline);
+EXPORT_SYMBOL(cypress_load_firmware);
 
 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
 MODULE_DESCRIPTION("Cypress firmware download");

drivers/media/usb/dvb-usb-v2/cypress_firmware.h → drivers/media/common/cypress_firmware.h

@@ -1,5 +1,4 @@
-/* cypress_firmware.h is part of the DVB USB library.
- *
+/*
  * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
  * see dvb-usb-init.c for copyright information.
  *
@@ -23,9 +22,7 @@ struct hexline {
 	u8 data[255];
 	u8 chk;
 };
-extern int usbv2_cypress_load_firmware(struct usb_device *,
-		const struct firmware *, int);
-extern int dvb_usbv2_get_hexline(const struct firmware *,
-		struct hexline *, int *);
+
+int cypress_load_firmware(struct usb_device *, const struct firmware *, int);
 
 #endif

drivers/media/usb/dvb-usb-v2/Kconfig

@@ -13,10 +13,6 @@ config DVB_USB_V2
 
 	  Say Y if you own a USB DVB device.
 
-config DVB_USB_CYPRESS_FIRMWARE
-	tristate "Cypress firmware helper routines"
-	depends on DVB_USB_V2
-
 config DVB_USB_AF9015
 	tristate "Afatech AF9015 DVB-T USB2.0 support"
 	depends on DVB_USB_V2
@@ -73,7 +69,7 @@ config DVB_USB_AU6610
 config DVB_USB_AZ6007
 	tristate "AzureWave 6007 and clones DVB-T/C USB2.0 support"
 	depends on DVB_USB_V2
-	select DVB_USB_CYPRESS_FIRMWARE
+	select CYPRESS_FIRMWARE
 	select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT
 	help

drivers/media/usb/dvb-usb-v2/Makefile

@@ -1,9 +1,6 @@
 dvb_usb_v2-objs := dvb_usb_core.o dvb_usb_urb.o usb_urb.o
 obj-$(CONFIG_DVB_USB_V2) += dvb_usb_v2.o
 
-dvb_usb_cypress_firmware-objs := cypress_firmware.o
-obj-$(CONFIG_DVB_USB_CYPRESS_FIRMWARE) += dvb_usb_cypress_firmware.o
-
 dvb-usb-af9015-objs := af9015.o
 obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o
 
@@ -46,4 +43,4 @@ obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o
 ccflags-y += -I$(srctree)/drivers/media/dvb-core
 ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
 ccflags-y += -I$(srctree)/drivers/media/tuners
-
+ccflags-y += -I$(srctree)/drivers/media/common

drivers/media/usb/dvb-usb-v2/az6007.c

@@ -842,7 +842,7 @@ static int az6007_download_firmware(struct dvb_usb_device *d,
 {
 	pr_debug("Loading az6007 firmware\n");
 
-	return usbv2_cypress_load_firmware(d->udev, fw, CYPRESS_FX2);
+	return cypress_load_firmware(d->udev, fw, CYPRESS_FX2);
 }
 
 /* DVB USB Driver stuff */

drivers/staging/media/go7007/Kconfig

@@ -4,6 +4,7 @@ config VIDEO_GO7007
 	depends on SND
 	select VIDEOBUF2_VMALLOC
 	select VIDEO_TUNER
+	select CYPRESS_FIRMWARE
 	select SND_PCM
 	select VIDEO_SONY_BTF_MPX if MEDIA_SUBDRV_AUTOSELECT
 	select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
@@ -33,7 +34,7 @@ config VIDEO_GO7007_USB
 
 config VIDEO_GO7007_LOADER
 	tristate "WIS GO7007 Loader support"
-	depends on VIDEO_GO7007 && DVB_USB
+	depends on VIDEO_GO7007
 	default y
 	---help---
 	  This is a go7007 firmware loader driver for the WIS GO7007

drivers/staging/media/go7007/Makefile

@@ -12,8 +12,4 @@ s2250-y := s2250-board.o
 #obj-$(CONFIG_VIDEO_SAA7134) += saa7134-go7007.o
 #ccflags-$(CONFIG_VIDEO_SAA7134:m=y) += -Idrivers/media/pci/saa7134
 
-# go7007-loader needs cypress ezusb loader from dvb-usb-v2
-ccflags-$(CONFIG_VIDEO_GO7007_LOADER:m=y) += -Idrivers/media/usb/dvb-usb-v2
-
-ccflags-y += -Idrivers/media/dvb-frontends
-ccflags-y += -Idrivers/media/dvb-core
+ccflags-$(CONFIG_VIDEO_GO7007_LOADER:m=y) += -Idrivers/media/common

drivers/staging/media/go7007/go7007-loader.c

@@ -85,7 +85,7 @@ static int go7007_loader_probe(struct usb_interface *interface,
 			"unable to load firmware from file \"%s\"\n", fw1);
 		goto failed2;
 	}
-	ret = usbv2_cypress_load_firmware(usbdev, fw, CYPRESS_FX2);
+	ret = cypress_load_firmware(usbdev, fw, CYPRESS_FX2);
 	release_firmware(fw);
 	if (0 != ret) {
 		dev_err(&interface->dev, "loader download failed\n");
@@ -100,7 +100,7 @@ static int go7007_loader_probe(struct usb_interface *interface,
 			"unable to load firmware from file \"%s\"\n", fw2);
 		goto failed2;
 	}
-	ret = usbv2_cypress_load_firmware(usbdev, fw, CYPRESS_FX2);
+	ret = cypress_load_firmware(usbdev, fw, CYPRESS_FX2);
 	release_firmware(fw);
 	if (0 != ret) {
 		dev_err(&interface->dev, "firmware download failed\n");