---

yaml
---
r: 313263
b: refs/heads/master
c: eae10c6
h: refs/heads/master
i:
  313261: 32b57bb
  313259: 8703d29
  313255: c69a6dc
  313247: 5c7ccc6
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3c68bb48214f87562b6956195178d991403d66d4
+refs/heads/master: eae10c68d361a7c1f481e1bd009f49dd1c49c04a

trunk/Documentation/devicetree/bindings/arm/olimex.txt

@@ -0,0 +1,6 @@
+Olimex i.MX Platforms Device Tree Bindings
+------------------------------------------
+
+i.MX23 Olinuxino Low Cost Board
+Required root node properties:
+    - compatible = "olimex,imx23-olinuxino", "fsl,imx23";

trunk/Documentation/devicetree/bindings/arm/tegra/emc.txt → trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt

@@ -15,7 +15,7 @@ Child device nodes describe the memory settings for different configurations and
 
 Example:
 
-	emc@7000f400 {
+	memory-controller@7000f400 {
 		#address-cells = < 1 >;
 		#size-cells = < 0 >;
 		compatible = "nvidia,tegra20-emc";

trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt

@@ -8,7 +8,7 @@ Required properties:
 - interrupts : Should contain MC General interrupt.
 
 Example:
-	mc {
+	memory-controller@0x7000f000 {
 		compatible = "nvidia,tegra20-mc";
 		reg = <0x7000f000 0x024
 		       0x7000f03c 0x3c4>;

trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt

@@ -8,7 +8,7 @@ Required properties:
 - interrupts : Should contain MC General interrupt.
 
 Example:
-	mc {
+	memory-controller {
 		compatible = "nvidia,tegra30-mc";
 		reg = <0x7000f000 0x010
 		       0x7000f03c 0x1b4

trunk/Documentation/devicetree/bindings/fb/mxsfb.txt

@@ -0,0 +1,19 @@
+* Freescale MXS LCD Interface (LCDIF)
+
+Required properties:
+- compatible: Should be "fsl,<chip>-lcdif".  Supported chips include
+  imx23 and imx28.
+- reg: Address and length of the register set for lcdif
+- interrupts: Should contain lcdif interrupts
+
+Optional properties:
+- panel-enable-gpios : Should specify the gpio for panel enable
+
+Examples:
+
+lcdif@80030000 {
+	compatible = "fsl,imx28-lcdif";
+	reg = <0x80030000 2000>;
+	interrupts = <38 86>;
+	panel-enable-gpios = <&gpio3 30 0>;
+};

trunk/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt

@@ -0,0 +1,16 @@
+* STMP3xxx/i.MX28 Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+    * "fsl,stmp3xxx-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: rtc alarm interrupt
+
+Example:
+
+rtc@80056000 {
+	compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+	reg = <0x80056000 2000>;
+	interrupts = <29>;
+};

trunk/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt

@@ -0,0 +1,27 @@
+* Freescale MXS Application UART (AUART)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-auart". The supported SoCs include
+  imx23 and imx28.
+- reg : Address and length of the register set for the device
+- interrupts : Should contain the auart interrupt numbers
+
+Example:
+auart0: serial@8006a000 {
+	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+	reg = <0x8006a000 0x2000>;
+	interrupts = <112 70 71>;
+};
+
+Note: Each auart port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+	serial0 = &auart0;
+	serial1 = &auart1;
+	serial2 = &auart2;
+	serial3 = &auart3;
+	serial4 = &auart4;
+};

trunk/arch/arm/Kconfig

@@ -913,7 +913,7 @@ config ARCH_NOMADIK
 	select ARM_AMBA
 	select ARM_VIC
 	select CPU_ARM926T
-	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select PINCTRL
 	select MIGHT_HAVE_CACHE_L2X0
@@ -1021,8 +1021,6 @@ source "arch/arm/mach-kirkwood/Kconfig"
 
 source "arch/arm/mach-ks8695/Kconfig"
 
-source "arch/arm/mach-lpc32xx/Kconfig"
-
 source "arch/arm/mach-msm/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"

trunk/arch/arm/boot/dts/cfa10036.dts

@@ -0,0 +1,52 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "Crystalfontz CFA-10036 Board";
+	compatible = "crystalfontz,cfa10036", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <4>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_b>;
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			gpios = <&gpio3 4 1>;
+			default-state = "on";
+		};
+	};
+};

trunk/arch/arm/boot/dts/ea3250.dts

@@ -0,0 +1,174 @@
+/*
+ * Embedded Artists LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "lpc32xx.dtsi"
+
+/ {
+	model = "Embedded Artists LPC3250 board based on NXP LPC3250";
+	compatible = "ea,ea3250", "nxp,lpc3250";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x4000000>;
+	};
+
+	ahb {
+		mac: ethernet@31060000 {
+			phy-mode = "rmii";
+			use-iram;
+		};
+
+		/* Here, choose exactly one from: ohci, usbd */
+		ohci@31020000 {
+			transceiver = <&isp1301>;
+			status = "okay";
+		};
+
+/*
+		usbd@31020000 {
+			transceiver = <&isp1301>;
+			status = "okay";
+		};
+*/
+
+		/* 128MB Flash via SLC NAND controller */
+		slc: flash@20020000 {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nxp,wdr-clks = <14>;
+			nxp,wwidth = <260000000>;
+			nxp,whold = <104000000>;
+			nxp,wsetup = <200000000>;
+			nxp,rdr-clks = <14>;
+			nxp,rwidth = <34666666>;
+			nxp,rhold = <104000000>;
+			nxp,rsetup = <200000000>;
+			nand-on-flash-bbt;
+			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+			mtd0@00000000 {
+				label = "ea3250-boot";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+
+			mtd1@00080000 {
+				label = "ea3250-uboot";
+				reg = <0x00080000 0x000c0000>;
+				read-only;
+			};
+
+			mtd2@00140000 {
+				label = "ea3250-kernel";
+				reg = <0x00140000 0x00400000>;
+			};
+
+			mtd3@00540000 {
+				label = "ea3250-rootfs";
+				reg = <0x00540000 0x07ac0000>;
+			};
+		};
+
+		apb {
+			uart5: serial@40090000 {
+				status = "okay";
+			};
+
+			uart3: serial@40080000 {
+				status = "okay";
+			};
+
+			uart6: serial@40098000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@400A0000 {
+				clock-frequency = <100000>;
+
+				eeprom@50 {
+					compatible = "at,24c256";
+					reg = <0x50>;
+				};
+
+				eeprom@57 {
+					compatible = "at,24c64";
+					reg = <0x57>;
+				};
+
+				uda1380: uda1380@18 {
+					compatible = "nxp,uda1380";
+					reg = <0x18>;
+					power-gpio = <&gpio 0x59 0>;
+					reset-gpio = <&gpio 0x51 0>;
+					dac-clk = "wspll";
+				};
+
+				pca9532: pca9532@60 {
+					compatible = "nxp,pca9532";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x60>;
+				};
+			};
+
+			i2c2: i2c@400A8000 {
+				clock-frequency = <100000>;
+			};
+
+			i2cusb: i2c@31020300 {
+				clock-frequency = <100000>;
+
+				isp1301: usb-transceiver@2d {
+					compatible = "nxp,isp1301";
+					reg = <0x2d>;
+				};
+			};
+
+			sd@20098000 {
+				wp-gpios = <&pca9532 5 0>;
+				cd-gpios = <&pca9532 4 0>;
+				cd-inverted;
+				bus-width = <4>;
+				status = "okay";
+			};
+		};
+
+		fab {
+			uart1: serial@40014000 {
+				status = "okay";
+			};
+
+			/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
+			adc@40048000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@21 {
+			label = "GPIO Key UP";
+			linux,code = <103>;
+			gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
+		};
+	};
+};