---

yaml
---
r: 121031
b: refs/heads/master
c: c1c15b6
h: refs/heads/master
i:
  121029: 7e91486
  121027: 17e9c25
  121023: 1013ccd
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: bed4f13065b520e564adffbfcd1c1a764a9c887e
+refs/heads/master: c1c15b65ec30275575dac9322aae607075769fbc

trunk/Documentation/feature-removal-schedule.txt

@@ -244,6 +244,18 @@ Who:	Michael Buesch <mb@bu3sch.de>
 
 ---------------------------
 
+What:	init_mm export
+When:	2.6.26
+Why:	Not used in-tree. The current out-of-tree users used it to
+	work around problems in the CPA code which should be resolved
+	by now. One usecase was described to provide verification code
+	of the CPA operation. That's a good idea in general, but such
+	code / infrastructure should be in the kernel and not in some
+	out-of-tree driver.
+Who:	Thomas Gleixner <tglx@linutronix.de>
+
+----------------------------
+
 What:	usedac i386 kernel parameter
 When:	2.6.27
 Why:	replaced by allowdac and no dac combination

trunk/Documentation/filesystems/proc.txt

@@ -1339,13 +1339,10 @@ nmi_watchdog
 
 Enables/Disables the NMI watchdog on x86 systems.  When the value is non-zero
 the NMI watchdog is enabled and will continuously test all online cpus to
-determine whether or not they are still functioning properly. Currently,
-passing "nmi_watchdog=" parameter at boot time is required for this function
-to work.
+determine whether or not they are still functioning properly.
 
-If LAPIC NMI watchdog method is in use (nmi_watchdog=2 kernel parameter), the
-NMI watchdog shares registers with oprofile. By disabling the NMI watchdog,
-oprofile may have more registers to utilize.
+Because the NMI watchdog shares registers with oprofile, by disabling the NMI
+watchdog, oprofile may have more registers to utilize.
 
 msgmni
 ------

trunk/Documentation/kernel-parameters.txt

@@ -1393,20 +1393,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]
 
-	nmi_watchdog=	[KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
-			Format: [panic,][num]
-			Valid num: 0,1,2
-			0 - turn nmi_watchdog off
-			1 - use the IO-APIC timer for the NMI watchdog
-			2 - use the local APIC for the NMI watchdog using
-			a performance counter. Note: This will use one performance
-			counter and the local APIC's performance vector.
-			When panic is specified panic when an NMI watchdog timeout occurs.
-			This is useful when you use a panic=... timeout and need the box
-			quickly up again.
-			Instead of 1 and 2 it is possible to use the following
-			symbolic names: lapic and ioapic
-			Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic
+	nmi_watchdog=	[KNL,BUGS=X86-32] Debugging features for SMP kernels
 
 	no387		[BUGS=X86-32] Tells the kernel to use the 387 maths
 			emulation library even if a 387 maths coprocessor
@@ -1639,17 +1626,6 @@ and is between 256 and 4096 characters. It is defined in the file
 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
 				enabled, this kernel boot option can be used to
 				disable the use of MSI interrupts system-wide.
-		noioapicquirk	[APIC] Disable all boot interrupt quirks.
-				Safety option to keep boot IRQs enabled. This
-				should never be necessary.
-		ioapicreroute	[APIC] Enable rerouting of boot IRQs to the
-				primary IO-APIC for bridges that cannot disable
-				boot IRQs. This fixes a source of spurious IRQs
-				when the system masks IRQs.
-		noioapicreroute	[APIC] Disable workaround that uses the
-				boot IRQ equivalent of an IRQ that connects to
-				a chipset where boot IRQs cannot be disabled.
-				The opposite of ioapicreroute.
 		biosirq		[X86-32] Use PCI BIOS calls to get the interrupt
 				routing table. These calls are known to be buggy
 				on several machines and they hang the machine
@@ -2279,13 +2255,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format:
 			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
 
-	tsc=		Disable clocksource-must-verify flag for TSC.
-			Format: <string>
-			[x86] reliable: mark tsc clocksource as reliable, this
-			disables clocksource verification at runtime.
-			Used to enable high-resolution timer mode on older
-			hardware, and in virtualized environment.
-
 	turbografx.map[2|3]=	[HW,JOY]
 			TurboGraFX parallel port interface
 			Format:

trunk/Documentation/nmi_watchdog.txt

@@ -69,11 +69,6 @@ to the overall system performance.
 On x86 nmi_watchdog is disabled by default so you have to enable it with
 a boot time parameter.
 
-It's possible to disable the NMI watchdog in run-time by writing "0" to
-/proc/sys/kernel/nmi_watchdog. Writing "1" to the same file will re-enable
-the NMI watchdog. Notice that you still need to use "nmi_watchdog=" parameter
-at boot time.
-
 NOTE: In kernels prior to 2.4.2-ac18 the NMI-oopser is enabled unconditionally
 on x86 SMP boxes.
 

trunk/Documentation/sound/alsa/ALSA-Configuration.txt

@@ -1063,7 +1063,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
 	STAC9227/9228/9229/927x
 	  ref		Reference board
-	  ref-no-jd	Reference board without HP/Mic jack detection
 	  3stack	D965 3stack
 	  5stack	D965 5stack + SPDIF
 	  dell-3stack	Dell Dimension E520
@@ -1077,7 +1076,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
 	STAC92HD73*
 	  ref		Reference board
-	  no-jd		BIOS setup but without jack-detection
 	  dell-m6-amic	Dell desktops/laptops with analog mics
 	  dell-m6-dmic	Dell desktops/laptops with digital mics
 	  dell-m6	Dell desktops/laptops with both type of mics

trunk/Documentation/x86/boot.txt

@@ -349,7 +349,7 @@ Protocol:	2.00+
 	3  SYSLINUX
 	4  EtherBoot
 	5  ELILO
-	7  GRUB
+	7  GRuB
 	8  U-BOOT
 	9  Xen
 	A  Gujin
@@ -537,8 +537,8 @@ Type:		read
 Offset/size:	0x248/4
 Protocol:	2.08+
 
-  If non-zero then this field contains the offset from the beginning
-  of the protected-mode code to the payload.
+  If non-zero then this field contains the offset from the end of the
+  real-mode code to the payload.
 
   The payload may be compressed. The format of both the compressed and
   uncompressed data should be determined using the standard magic

trunk/Documentation/x86/x86_64/boot-options.txt

@@ -79,6 +79,17 @@ Timing
   Report when timer interrupts are lost because some code turned off
   interrupts for too long.
 
+  nmi_watchdog=NUMBER[,panic]
+  NUMBER can be:
+  0 don't use an NMI watchdog
+  1 use the IO-APIC timer for the NMI watchdog
+  2 use the local APIC for the NMI watchdog using a performance counter. Note
+  This will use one performance counter and the local APIC's performance
+  vector.
+  When panic is specified panic when an NMI watchdog timeout occurs.
+  This is useful when you use a panic=... timeout and need the box
+  quickly up again.
+
   nohpet
   Don't use the HPET timer.
 

trunk/Documentation/x86/x86_64/mm.txt

@@ -6,7 +6,7 @@ Virtual memory map with 4 level page tables:
 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
 hole caused by [48:63] sign extension
 ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole
-ffff880000000000 - ffffc0ffffffffff (=57 TB) direct mapping of all phys. memory
+ffff810000000000 - ffffc0ffffffffff (=46 bits) direct mapping of all phys. memory
 ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole
 ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space
 ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB)

trunk/MAINTAINERS

@@ -2191,9 +2191,9 @@ S:	Supported
 
 INOTIFY
 P:	John McCutchan
-M:	john@johnmccutchan.com
+M:	ttb@tentacle.dhs.org
 P:	Robert Love
-M:	rlove@rlove.org
+M:	rml@novell.com
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc9
+EXTRAVERSION = -rc8
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*

trunk/arch/avr32/boards/favr-32/flash.c

@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/smc.h>
+#include <asm/arch/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,

trunk/arch/avr32/boards/favr-32/setup.c

@@ -25,10 +25,10 @@
 
 #include <asm/setup.h>
 
-#include <mach/at32ap700x.h>
-#include <mach/init.h>
-#include <mach/board.h>
-#include <mach/portmux.h>
+#include <asm/arch/at32ap700x.h>
+#include <asm/arch/init.h>
+#include <asm/arch/board.h>
+#include <asm/arch/portmux.h>
 
 /* Oscillator frequencies. These are board-specific */
 unsigned long at32_board_osc_rates[3] = {

trunk/arch/avr32/boot/images/Makefile

@@ -10,7 +10,7 @@ MKIMAGE		:= $(srctree)/scripts/mkuboot.sh
 
 extra-y		:= vmlinux.bin vmlinux.gz
 
-OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
+OBJCOPYFLAGS_vmlinux.bin := -O binary
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)