---

yaml
---
r: 355742
b: refs/heads/master
c: 6520700
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a6f243a4d6cbc9d7b0f63dcf7eb1e79f08880553
+refs/heads/master: 6520700fdb2cc07ed86e893a2e88c491e04d6b75

trunk/Documentation/devicetree/bindings/mtd/fsmc-nand.txt

@@ -1,7 +1,7 @@
 * FSMC NAND
 
 Required properties:
-- compatible : "st,spear600-fsmc-nand", "stericsson,fsmc-nand"
+- compatible : "st,spear600-fsmc-nand"
 - reg : Address range of the mtd chip
 - reg-names: Should contain the reg names "fsmc_regs", "nand_data", "nand_addr" and "nand_cmd"
 

trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt

@@ -81,8 +81,7 @@ PA31	TXD4
 Required properties for pin configuration node:
 - atmel,pins: 4 integers array, represents a group of pins mux and config
   setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
-  The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
-  PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
+  The PERIPH 0 means gpio.
 
 Bits used for CONFIG:
 PULL_UP		(1 << 0): indicate this pin need a pull up.
@@ -127,7 +126,7 @@ pinctrl@fffff400 {
 		pinctrl_dbgu: dbgu-0 {
 			atmel,pins =
 				<1 14 0x1 0x0	/* PB14 periph A */
-				 1 15 0x1 0x1>;	/* PB15 periph A with pullup */
+				 1 15 0x1 0x1>;	/* PB15 periph with pullup */
 		};
 	};
 };

trunk/Documentation/filesystems/f2fs.txt

@@ -175,9 +175,9 @@ consists of multiple segments as described below.
                                             align with the zone size <-|
                  |-> align with the segment size
      _________________________________________________________________________
-    |            |            |   Segment   |    Node     |   Segment  |      |
-    | Superblock | Checkpoint |    Info.    |   Address   |   Summary  | Main |
-    |    (SB)    |   (CP)     | Table (SIT) | Table (NAT) | Area (SSA) |      |
+    |            |            |    Node     |   Segment   |   Segment  |      |
+    | Superblock | Checkpoint |   Address   |    Info.    |   Summary  | Main |
+    |    (SB)    |   (CP)     | Table (NAT) | Table (SIT) | Area (SSA) |      |
     |____________|_____2______|______N______|______N______|______N_____|__N___|
                                                                        .      .
                                                              .                .
@@ -200,14 +200,14 @@ consists of multiple segments as described below.
  : It contains file system information, bitmaps for valid NAT/SIT sets, orphan
    inode lists, and summary entries of current active segments.
 
-- Segment Information Table (SIT)
- : It contains segment information such as valid block count and bitmap for the
-   validity of all the blocks.
-
 - Node Address Table (NAT)
  : It is composed of a block address table for all the node blocks stored in
    Main area.
 
+- Segment Information Table (SIT)
+ : It contains segment information such as valid block count and bitmap for the
+   validity of all the blocks.
+
 - Segment Summary Area (SSA)
  : It contains summary entries which contains the owner information of all the
    data and node blocks stored in Main area.
@@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are
 valid, as shown as below.
 
   +--------+----------+---------+
-  |   CP   |    SIT   |   NAT   |
+  |   CP   |    NAT   |   SIT   |
   +--------+----------+---------+
   .         .          .          .
   .            .              .              .
   .               .                 .                 .
   +-------+-------+--------+--------+--------+--------+
-  | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 |
+  | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 |
   +-------+-------+--------+--------+--------+--------+
      |             ^                          ^
      |             |                          |

trunk/MAINTAINERS

@@ -228,7 +228,7 @@ S:	Maintained
 F:	drivers/platform/x86/acerhdf.c
 
 ACER WMI LAPTOP EXTRAS
-M:	"Lee, Chun-Yi" <jlee@suse.com>
+M:	Joey Lee <jlee@novell.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/acer-wmi.c
@@ -648,7 +648,7 @@ F:	arch/arm/
 
 ARM SUB-ARCHITECTURES
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
+S:	MAINTAINED
 F:	arch/arm/mach-*/
 F:	arch/arm/plat-*/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
@@ -1351,14 +1351,6 @@ W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
 
-WILOCITY WIL6210 WIRELESS DRIVER
-M:	Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
-L:	linux-wireless@vger.kernel.org
-L:	wil6210@qca.qualcomm.com
-S:	Supported
-W:	http://wireless.kernel.org/en/users/Drivers/wil6210
-F:	drivers/net/wireless/ath/wil6210/
-
 CARL9170 LINUX COMMUNITY WIRELESS DRIVER
 M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
@@ -1972,9 +1964,9 @@ S:	Maintained
 F:	drivers/usb/host/ohci-ep93xx.c
 
 CIRRUS LOGIC CS4270 SOUND DRIVER
-M:	Timur Tabi <timur@tabi.org>
+M:	Timur Tabi <timur@freescale.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-S:	Odd Fixes
+S:	Supported
 F:	sound/soc/codecs/cs4270*
 
 CLEANCACHE API
@@ -3191,9 +3183,9 @@ F:	include/uapi/video/
 F:	include/uapi/linux/fb.h
 
 FREESCALE DIU FRAMEBUFFER DRIVER
-M:	Timur Tabi <timur@tabi.org>
+M:	Timur Tabi <timur@freescale.com>
 L:	linux-fbdev@vger.kernel.org
-S:	Maintained
+S:	Supported
 F:	drivers/video/fsl-diu-fb.*
 
 FREESCALE DMA DRIVER
@@ -3228,8 +3220,9 @@ F:	drivers/net/ethernet/freescale/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
 FREESCALE QUICC ENGINE LIBRARY
+M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Orphan
+S:	Supported
 F:	arch/powerpc/sysdev/qe_lib/
 F:	arch/powerpc/include/asm/*qe.h
 
@@ -3248,16 +3241,16 @@ S:	Maintained
 F:	drivers/net/ethernet/freescale/ucc_geth*
 
 FREESCALE QUICC ENGINE UCC UART DRIVER
-M:	Timur Tabi <timur@tabi.org>
+M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Maintained
+S:	Supported
 F:	drivers/tty/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
-M:	Timur Tabi <timur@tabi.org>
+M:	Timur Tabi <timur@freescale.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Maintained
+S:	Supported
 F:	sound/soc/fsl/fsl*
 F:	sound/soc/fsl/mpc8610_hpcd.c
 
@@ -4216,7 +4209,6 @@ M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	kernel/irq/
-F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
@@ -5085,7 +5077,7 @@ S:	Maintained
 F:	drivers/media/radio/radio-mr800.c
 
 MSI LAPTOP SUPPORT
-M:	"Lee, Chun-Yi" <jlee@suse.com>
+M:	"Lee, Chun-Yi" <jlee@novell.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
@@ -5515,7 +5507,8 @@ M:	Benoît Cousson <b-cousson@ti.com>
 M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
-F:	arch/arm/mach-omap2/omap_hwmod.*
+F:	arch/arm/mach-omap2/omap_hwmod.c
+F:	arch/arm/plat-omap/include/plat/omap_hwmod.h
 
 OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
 M:	Benoît Cousson <b-cousson@ti.com>
@@ -6586,7 +6579,7 @@ F:	drivers/media/platform/s3c-camif/
 F:	include/media/s3c_camif.h
 
 SERIAL DRIVERS
-M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+M:	Alan Cox <alan@linux.intel.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial
@@ -7341,7 +7334,7 @@ S:	Odd Fixes
 F:	drivers/staging/speakup/
 
 STAGING - TI DSP BRIDGE DRIVERS
-M:	Omar Ramirez Luna <omar.ramirez@copitl.com>
+M:	Omar Ramirez Luna <omar.ramirez@ti.com>
 S:	Odd Fixes
 F:	drivers/staging/tidspbridge/
 
@@ -8533,7 +8526,7 @@ F:	Documentation/x86/
 F:	arch/x86/
 
 X86 PLATFORM DRIVERS
-M:	Matthew Garrett <matthew.garrett@nebula.com>
+M:	Matthew Garrett <mjg@redhat.com>
 L:	platform-driver-x86@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
 S:	Maintained

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc3
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
@@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 				  -e s/arm.*/arm/ -e s/sa110/arm/ \
 				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
 				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-				  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
+				  -e s/sh[234].*/sh/ )
 
 # Cross compiling and selecting different set of gcc/bin-utils
 # ---------------------------------------------------------------------------

trunk/arch/arm/Kconfig

@@ -899,12 +899,10 @@ config ARCH_NOMADIK
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
-	select CLKSRC_NOMADIK_MTU
 	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_CACHE_L2X0
-	select OF
 	select PINCTRL
 	select PINCTRL_STN8815
 	select SPARSE_IRQ

trunk/arch/arm/boot/dts/Makefile

@@ -100,7 +100,6 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
 	imx28-tx28.dtb
-dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
@@ -156,7 +155,6 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
 
 targets += dtbs
-targets += $(dtb-y)
 endif
 
 # *.dtb used to be generated in the directory above. Clean out the

trunk/arch/arm/boot/dts/armada-370-db.dts

@@ -26,7 +26,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
+		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
 
 	soc {

trunk/arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -50,25 +50,27 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
+			interrupts = <16>, <17>, <18>, <19>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
 			ngpios = <17>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>;
+			interrupts = <20>, <21>, <22>;
 		};
 	};
 };

trunk/arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -51,36 +51,39 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018100 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018100 0x40>,
+			    <0xd0018800 0x30>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <82>, <83>, <84>, <85>;
+			interrupts = <16>, <17>, <18>, <19>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018140 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018140 0x40>,
+			    <0xd0018840 0x30>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <87>, <88>, <89>, <90>;
+			interrupts = <20>, <21>, <22>, <23>;
 		};
 
 		gpio2: gpio@d0018180 {
-			compatible = "marvell,orion-gpio";
-			reg = <0xd0018180 0x40>;
+			compatible = "marvell,armadaxp-gpio";
+			reg = <0xd0018180 0x40>,
+			    <0xd0018870 0x30>;
 			ngpios = <3>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <91>;
+			interrupts = <24>;
 		};
 
 		ethernet@d0034000 {