Merge remote-tracking branch 'regmap/topic/field' into regmap-next

Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt

@@ -0,0 +1,110 @@
+*ST pin controller.
+
+Each multi-function pin is controlled, driven and routed through the
+PIO multiplexing block. Each pin supports GPIO functionality (ALT0)
+and multiple alternate functions(ALT1 - ALTx) that directly connect
+the pin to different hardware blocks.
+
+When a pin is in GPIO mode, Output Enable (OE), Open Drain(OD), and
+Pull Up (PU) are driven by the related PIO block.
+
+ST pinctrl driver controls PIO multiplexing block and also interacts with
+gpio driver to configure a pin.
+
+Required properties: (PIO multiplexing block)
+- compatible	: should be "st,<SOC>-<pio-block>-pinctrl"
+	like st,stih415-sbc-pinctrl, st,stih415-front-pinctrl and so on.
+- gpio-controller : Indicates this device is a GPIO controller
+- #gpio-cells	  : Should be one. The first cell is the pin number.
+- st,retime-pin-mask	: Should be mask to specify which pins can be retimed.
+	If the property is not present, it is assumed that all the pins in the
+	bank are capable of retiming. Retiming is mainly used to improve the
+	IO timing margins of external synchronous interfaces.
+- st,bank-name		: Should be a name string for this bank as
+			specified in datasheet.
+- st,syscfg		: Should be a phandle of the syscfg node.
+
+Example:
+	pin-controller-sbc {
+		#address-cells	= <1>;
+		#size-cells	= <1>;
+		compatible	= "st,stih415-sbc-pinctrl";
+		st,syscfg	= <&syscfg_sbc>;
+		ranges 		= <0 0xfe610000 0x5000>;
+		PIO0: gpio@fe610000 {
+			gpio-controller;
+			#gpio-cells	= <1>;
+			reg		= <0 0x100>;
+			st,bank-name	= "PIO0";
+		};
+		...
+		pin-functions nodes follow...
+	};
+
+
+Contents of function subnode node:
+----------------------
+Required properties for pin configuration node:
+- st,pins	: Child node with list of pins with configuration.
+
+Below is the format of how each pin conf should look like.
+
+<bank offset mux mode rt_type rt_delay rt_clk>
+
+Every PIO is represented with 4-7 parameters depending on retime configuration.
+Each parameter is explained as below.
+
+-bank		: Should be bank phandle to which this PIO belongs.
+-offset		: Offset in the PIO bank.
+-mux		: Should be alternate function number associated this pin.
+		Use same numbers from datasheet.
+-mode		:pin configuration is selected from one of the below values.
+		IN
+		IN_PU
+		OUT
+		BIDIR
+		BIDIR_PU
+
+-rt_type	Retiming Configuration for the pin.
+		Possible retime configuration are:
+
+		-------		-------------
+		value		args
+		-------		-------------
+		NICLK		<delay> <clk>
+		ICLK_IO		<delay> <clk>
+		BYPASS		<delay>
+		DE_IO		<delay> <clk>
+		SE_ICLK_IO	<delay> <clk>
+		SE_NICLK_IO	<delay> <clk>
+
+- delay	is retime delay in pico seconds as mentioned in data sheet.
+
+- rt_clk	:clk to be use for retime.
+		Possible values are:
+		CLK_A
+		CLK_B
+		CLK_C
+		CLK_D
+
+Example of mmcclk pin which is a bi-direction pull pu with retime config
+as non inverted clock retimed with CLK_B and delay of 0 pico seconds:
+
+pin-controller {
+	...
+	mmc0 {
+		pinctrl_mmc: mmc {
+			st,pins {
+				mmcclk = <&PIO13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+				...
+			};
+		};
+	...
+	};
+};
+
+sdhci0:sdhci@fe810000{
+	...
+	pinctrl-names = "default";
+	pinctrl-0	= <&pinctrl_mmc>;
+};

drivers/base/regmap/internal.h

@@ -176,6 +176,14 @@ struct regmap_range_node {
 	unsigned int window_len;
 };
 
+struct regmap_field {
+	struct regmap *regmap;
+	unsigned int mask;
+	/* lsb */
+	unsigned int shift;
+	unsigned int reg;
+};
+
 #ifdef CONFIG_DEBUG_FS
 extern void regmap_debugfs_initcall(void);
 extern void regmap_debugfs_init(struct regmap *map, const char *name);

drivers/base/regmap/regmap.c

@@ -807,6 +807,95 @@ struct regmap *devm_regmap_init(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_regmap_init);
 
+static void regmap_field_init(struct regmap_field *rm_field,
+	struct regmap *regmap, struct reg_field reg_field)
+{
+	int field_bits = reg_field.msb - reg_field.lsb + 1;
+	rm_field->regmap = regmap;
+	rm_field->reg = reg_field.reg;
+	rm_field->shift = reg_field.lsb;
+	rm_field->mask = ((BIT(field_bits) - 1) << reg_field.lsb);
+}
+
+/**
+ * devm_regmap_field_alloc(): Allocate and initialise a register field
+ * in a register map.
+ *
+ * @dev: Device that will be interacted with
+ * @regmap: regmap bank in which this register field is located.
+ * @reg_field: Register field with in the bank.
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap_field. The regmap_field will be automatically freed
+ * by the device management code.
+ */
+struct regmap_field *devm_regmap_field_alloc(struct device *dev,
+		struct regmap *regmap, struct reg_field reg_field)
+{
+	struct regmap_field *rm_field = devm_kzalloc(dev,
+					sizeof(*rm_field), GFP_KERNEL);
+	if (!rm_field)
+		return ERR_PTR(-ENOMEM);
+
+	regmap_field_init(rm_field, regmap, reg_field);
+
+	return rm_field;
+
+}
+EXPORT_SYMBOL_GPL(devm_regmap_field_alloc);
+
+/**
+ * devm_regmap_field_free(): Free register field allocated using
+ * devm_regmap_field_alloc. Usally drivers need not call this function,
+ * as the memory allocated via devm will be freed as per device-driver
+ * life-cyle.
+ *
+ * @dev: Device that will be interacted with
+ * @field: regmap field which should be freed.
+ */
+void devm_regmap_field_free(struct device *dev,
+	struct regmap_field *field)
+{
+	devm_kfree(dev, field);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_field_free);
+
+/**
+ * regmap_field_alloc(): Allocate and initialise a register field
+ * in a register map.
+ *
+ * @regmap: regmap bank in which this register field is located.
+ * @reg_field: Register field with in the bank.
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap_field. The regmap_field should be freed by the
+ * user once its finished working with it using regmap_field_free().
+ */
+struct regmap_field *regmap_field_alloc(struct regmap *regmap,
+		struct reg_field reg_field)
+{
+	struct regmap_field *rm_field = kzalloc(sizeof(*rm_field), GFP_KERNEL);
+
+	if (!rm_field)
+		return ERR_PTR(-ENOMEM);
+
+	regmap_field_init(rm_field, regmap, reg_field);
+
+	return rm_field;
+}
+EXPORT_SYMBOL_GPL(regmap_field_alloc);
+
+/**
+ * regmap_field_free(): Free register field allocated using regmap_field_alloc
+ *
+ * @field: regmap field which should be freed.
+ */
+void regmap_field_free(struct regmap_field *field)
+{
+	kfree(field);
+}
+EXPORT_SYMBOL_GPL(regmap_field_free);
+
 /**
  * regmap_reinit_cache(): Reinitialise the current register cache
  *
@@ -1255,6 +1344,22 @@ int regmap_raw_write(struct regmap *map, unsigned int reg,
 }
 EXPORT_SYMBOL_GPL(regmap_raw_write);
 
+/**
+ * regmap_field_write(): Write a value to a single register field
+ *
+ * @field: Register field to write to
+ * @val: Value to be written
+ *
+ * A value of zero will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+int regmap_field_write(struct regmap_field *field, unsigned int val)
+{
+	return regmap_update_bits(field->regmap, field->reg,
+				field->mask, val << field->shift);
+}
+EXPORT_SYMBOL_GPL(regmap_field_write);
+
 /*
  * regmap_bulk_write(): Write multiple registers to the device
  *
@@ -1537,6 +1642,31 @@ int regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
 }
 EXPORT_SYMBOL_GPL(regmap_raw_read);
 
+/**
+ * regmap_field_read(): Read a value to a single register field
+ *
+ * @field: Register field to read from
+ * @val: Pointer to store read value
+ *
+ * A value of zero will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+int regmap_field_read(struct regmap_field *field, unsigned int *val)
+{
+	int ret;
+	unsigned int reg_val;
+	ret = regmap_read(field->regmap, field->reg, &reg_val);
+	if (ret != 0)
+		return ret;
+
+	reg_val &= field->mask;
+	reg_val >>= field->shift;
+	*val = reg_val;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regmap_field_read);
+
 /**
  * regmap_bulk_read(): Read multiple registers from the device
  *

drivers/pinctrl/Kconfig

@@ -169,6 +169,12 @@ config PINCTRL_SUNXI
 	select PINMUX
 	select GENERIC_PINCONF
 
+config PINCTRL_ST
+	bool
+	depends on OF
+	select PINMUX
+	select PINCONF
+
 config PINCTRL_TEGRA
 	bool
 	select PINMUX

drivers/pinctrl/Makefile

@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_EXYNOS5440)	+= pinctrl-exynos5440.o
 obj-$(CONFIG_PINCTRL_S3C64XX)	+= pinctrl-s3c64xx.o
 obj-$(CONFIG_PINCTRL_XWAY)	+= pinctrl-xway.o
 obj-$(CONFIG_PINCTRL_LANTIQ)	+= pinctrl-lantiq.o
+obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
 
 obj-$(CONFIG_PLAT_ORION)        += mvebu/
 obj-$(CONFIG_ARCH_SHMOBILE)	+= sh-pfc/