---

yaml
---
r: 339567
b: refs/heads/master
c: e8d432c
h: refs/heads/master
i:
  339565: 0b28424
  339563: 9d4ba1e
  339559: f5b2469
  339551: a2e9657
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e38eb34aab13a81b91400c75c703252473100bc4
+refs/heads/master: e8d432c9cf0a3d569b2d00877d12c9ffe9e55286

trunk/Documentation/cgroups/memory.txt

@@ -466,10 +466,6 @@ Note:
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
-Please note that unlike the global swappiness, memcg knob set to 0
-really prevents from any swapping even if there is a swap storage
-available. This might lead to memcg OOM killer if there are no file
-pages to reclaim.
 
 Following cgroups' swappiness can't be changed.
 - root cgroup (uses /proc/sys/vm/swappiness).

trunk/Documentation/filesystems/proc.txt

@@ -33,7 +33,7 @@ Table of Contents
   2	Modifying System Parameters
 
   3	Per-Process Parameters
-  3.1	/proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
+  3.1	/proc/<pid>/oom_score_adj - Adjust the oom-killer
 								score
   3.2	/proc/<pid>/oom_score - Display current oom-killer score
   3.3	/proc/<pid>/io - Display the IO accounting fields
@@ -1320,10 +1320,10 @@ of the kernel.
 CHAPTER 3: PER-PROCESS PARAMETERS
 ------------------------------------------------------------------------------
 
-3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
+3.1 /proc/<pid>/oom_score_adj- Adjust the oom-killer score
 --------------------------------------------------------------------------------
 
-These file can be used to adjust the badness heuristic used to select which
+This file can be used to adjust the badness heuristic used to select which
 process gets killed in out of memory conditions.
 
 The badness heuristic assigns a value to each candidate task ranging from 0
@@ -1361,12 +1361,6 @@ same system, cpuset, mempolicy, or memory controller resources to use at least
 equivalent to discounting 50% of the task's allowed memory from being considered
 as scoring against the task.
 
-For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
-be used to tune the badness score.  Its acceptable values range from -16
-(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
-(OOM_DISABLE) to disable oom killing entirely for that task.  Its value is
-scaled linearly with /proc/<pid>/oom_score_adj.
-
 The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
 value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
 requires CAP_SYS_RESOURCE.
@@ -1381,9 +1375,7 @@ minimal amount of work.
 -------------------------------------------------------------
 
 This file can be used to check the current score used by the oom-killer is for
-any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
-process should be killed in an out-of-memory situation.
-
+any given <pid>.
 
 3.3  /proc/<pid>/io - Display the IO accounting fields
 -------------------------------------------------------

trunk/Documentation/networking/netdev-features.txt

@@ -164,4 +164,4 @@ read the CRC recorded by the NIC on receipt of the packet.
 This requests that the NIC receive all possible frames, including errored
 frames (such as bad FCS, etc).  This can be helpful when sniffing a link with
 bad packets on it.  Some NICs may receive more packets if also put into normal
-PROMISC mode.
+PROMISC mdoe.

trunk/MAINTAINERS

@@ -3598,58 +3598,16 @@ F:	drivers/hid/hid-hyperv.c
 F:	drivers/net/hyperv/
 F:	drivers/staging/hv/
 
-I2C OVER PARALLEL PORT
-M:	Jean Delvare <khali@linux-fr.org>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-parport
-F:	Documentation/i2c/busses/i2c-parport-light
-F:	drivers/i2c/busses/i2c-parport.c
-F:	drivers/i2c/busses/i2c-parport-light.c
-
-I2C/SMBUS CONTROLLER DRIVERS FOR PC
-M:	Jean Delvare <khali@linux-fr.org>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-ali1535
-F:	Documentation/i2c/busses/i2c-ali1563
-F:	Documentation/i2c/busses/i2c-ali15x3
-F:	Documentation/i2c/busses/i2c-amd756
-F:	Documentation/i2c/busses/i2c-amd8111
-F:	Documentation/i2c/busses/i2c-i801
-F:	Documentation/i2c/busses/i2c-nforce2
-F:	Documentation/i2c/busses/i2c-piix4
-F:	Documentation/i2c/busses/i2c-sis5595
-F:	Documentation/i2c/busses/i2c-sis630
-F:	Documentation/i2c/busses/i2c-sis96x
-F:	Documentation/i2c/busses/i2c-via
-F:	Documentation/i2c/busses/i2c-viapro
-F:	drivers/i2c/busses/i2c-ali1535.c
-F:	drivers/i2c/busses/i2c-ali1563.c
-F:	drivers/i2c/busses/i2c-ali15x3.c
-F:	drivers/i2c/busses/i2c-amd756.c
-F:	drivers/i2c/busses/i2c-amd756-s4882.c
-F:	drivers/i2c/busses/i2c-amd8111.c
-F:	drivers/i2c/busses/i2c-i801.c
-F:	drivers/i2c/busses/i2c-isch.c
-F:	drivers/i2c/busses/i2c-nforce2.c
-F:	drivers/i2c/busses/i2c-nforce2-s4985.c
-F:	drivers/i2c/busses/i2c-piix4.c
-F:	drivers/i2c/busses/i2c-sis5595.c
-F:	drivers/i2c/busses/i2c-sis630.c
-F:	drivers/i2c/busses/i2c-sis96x.c
-F:	drivers/i2c/busses/i2c-via.c
-F:	drivers/i2c/busses/i2c-viapro.c
-
 I2C/SMBUS STUB DRIVER
 M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-stub.c
 
 I2C SUBSYSTEM
-M:	Wolfram Sang <w.sang@pengutronix.de>
+M:	"Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
 M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
+M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -3660,13 +3618,6 @@ F:	drivers/i2c/
 F:	include/linux/i2c.h
 F:	include/linux/i2c-*.h
 
-I2C-TAOS-EVM DRIVER
-M:	Jean Delvare <khali@linux-fr.org>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-taos-evm
-F:	drivers/i2c/busses/i2c-taos-evm.c
-
 I2C-TINY-USB DRIVER
 M:	Till Harbaum <till@harbaum.org>
 L:	linux-i2c@vger.kernel.org
@@ -7259,14 +7210,6 @@ L:	linux-xtensa@linux-xtensa.org
 S:	Maintained
 F:	arch/xtensa/
 
-THERMAL
-M:      Zhang Rui <rui.zhang@intel.com>
-L:      linux-pm@vger.kernel.org
-T:      git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
-S:      Supported
-F:      drivers/thermal/
-F:      include/linux/thermal.h
-
 THINKPAD ACPI EXTRAS DRIVER
 M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
@@ -7944,6 +7887,13 @@ M:	Roger Luethi <rl@hellgate.ch>
 S:	Maintained
 F:	drivers/net/ethernet/via/via-rhine.c
 
+VIAPRO SMBUS DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-viapro
+F:	drivers/i2c/busses/i2c-viapro.c
+
 VIA SD/MMC CARD CONTROLLER DRIVER
 M:	Bruce Chang <brucechang@via.com.tw>
 M:	Harald Welte <HaraldWelte@viatech.com>

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc5
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*

trunk/arch/alpha/kernel/osf_sys.c

@@ -445,7 +445,7 @@ struct procfs_args {
  * unhappy with OSF UFS. [CHECKME]
  */
 static int
-osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
+osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -465,7 +465,7 @@ osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
 }
 
 static int
-osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
+osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -485,7 +485,7 @@ osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
 }
 
 static int
-osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags)
+osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
 {
 	struct procfs_args tmp;
 

trunk/arch/arm/boot/Makefile

@@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y)
 
 $(obj)/xipImage: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+	$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
 
 $(obj)/Image $(obj)/zImage: FORCE
 	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready'
+	$(kecho) '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: $(obj)/Image FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready'
+	$(kecho) '  Kernel: $@ is ready'
 
 endif
 
@@ -90,15 +90,15 @@ fi
 $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
-	@$(kecho) '  Image $@ is ready'
+	$(kecho) '  Image $@ is ready'
 
 $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
 	@:
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready'
+	$(kecho) '  Kernel: $@ is ready'
 
 PHONY += initrd FORCE
 initrd:

trunk/arch/arm/boot/dts/tegra30.dtsi

@@ -73,8 +73,8 @@
 
 	pinmux: pinmux {
 		compatible = "nvidia,tegra30-pinmux";
-		reg = <0x70000868 0xd4    /* Pad control registers */
-		       0x70003000 0x3e4>; /* Mux registers */
+		reg = <0x70000868 0xd0    /* Pad control registers */
+		       0x70003000 0x3e0>; /* Mux registers */
 	};
 
 	serial@70006000 {