---

yaml
---
r: 264341
b: refs/heads/master
c: 2b66685
h: refs/heads/master
i:
  264339: 00b6f28
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 153b19a3b9fd8b9478495b9ee1f93f6a77c564f9
+refs/heads/master: 2b666859ec323403ac9a3a441d16eab30945404b

trunk/Documentation/kernel-parameters.txt

@@ -2706,10 +2706,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			functions are at fixed addresses, they make nice
 			targets for exploits that can control RIP.
 
-			emulate     [default] Vsyscalls turn into traps and are
-			            emulated reasonably safely.
+			emulate     Vsyscalls turn into traps and are emulated
+			            reasonably safely.
 
-			native      Vsyscalls are native syscall instructions.
+			native      [default] Vsyscalls are native syscall
+			            instructions.
 			            This is a little bit faster than trapping
 			            and makes a few dynamic recompilers work
 			            better than they would in emulation mode.

trunk/arch/x86/kernel/vsyscall_64.c

@@ -56,7 +56,7 @@ DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data) =
 	.lock = __SEQLOCK_UNLOCKED(__vsyscall_gtod_data.lock),
 };
 
-static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE;
+static enum { EMULATE, NATIVE, NONE } vsyscall_mode = NATIVE;
 
 static int __init vsyscall_setup(char *str)
 {

trunk/arch/x86/platform/mrst/mrst.c

@@ -678,40 +678,38 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 	pentry = (struct sfi_device_table_entry *)sb->pentry;
 
 	for (i = 0; i < num; i++, pentry++) {
-		int irq = pentry->irq;
-
-		if (irq != (u8)0xff) { /* native RTE case */
+		if (pentry->irq != (u8)0xff) { /* native RTE case */
 			/* these SPI2 devices are not exposed to system as PCI
 			 * devices, but they have separate RTE entry in IOAPIC
 			 * so we have to enable them one by one here
 			 */
-			ioapic = mp_find_ioapic(irq);
+			ioapic = mp_find_ioapic(pentry->irq);
 			irq_attr.ioapic = ioapic;
-			irq_attr.ioapic_pin = irq;
+			irq_attr.ioapic_pin = pentry->irq;
 			irq_attr.trigger = 1;
 			irq_attr.polarity = 1;
-			io_apic_set_pci_routing(NULL, irq, &irq_attr);
+			io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr);
 		} else
-			irq = 0; /* No irq */
+			pentry->irq = 0; /* No irq */
 
 		switch (pentry->type) {
 		case SFI_DEV_TYPE_IPC:
 			/* ID as IRQ is a hack that will go away */
-			pdev = platform_device_alloc(pentry->name, irq);
+			pdev = platform_device_alloc(pentry->name, pentry->irq);
 			if (pdev == NULL) {
 				pr_err("out of memory for SFI platform device '%s'.\n",
 							pentry->name);
 				continue;
 			}
-			install_irq_resource(pdev, irq);
+			install_irq_resource(pdev, pentry->irq);
 			pr_debug("info[%2d]: IPC bus, name = %16.16s, "
-				"irq = 0x%2x\n", i, pentry->name, irq);
+				"irq = 0x%2x\n", i, pentry->name, pentry->irq);
 			sfi_handle_ipc_dev(pdev);
 			break;
 		case SFI_DEV_TYPE_SPI:
 			memset(&spi_info, 0, sizeof(spi_info));
 			strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
-			spi_info.irq = irq;
+			spi_info.irq = pentry->irq;
 			spi_info.bus_num = pentry->host_num;
 			spi_info.chip_select = pentry->addr;
 			spi_info.max_speed_hz = pentry->max_freq;
@@ -728,7 +726,7 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 			memset(&i2c_info, 0, sizeof(i2c_info));
 			bus = pentry->host_num;
 			strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
-			i2c_info.irq = irq;
+			i2c_info.irq = pentry->irq;
 			i2c_info.addr = pentry->addr;
 			pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
 				"irq = 0x%2x, addr = 0x%x\n", i, bus,

trunk/drivers/ide/Kconfig

@@ -327,7 +327,7 @@ config BLK_DEV_OPTI621
 	select BLK_DEV_IDEPCI
 	help
 	  This is a driver for the OPTi 82C621 EIDE controller.
-	  Please read the comments at the top of <file:drivers/ide/opti621.c>.
+	  Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.
 
 config BLK_DEV_RZ1000
 	tristate "RZ1000 chipset bugfix/support"
@@ -365,7 +365,7 @@ config BLK_DEV_ALI15X3
 	  normal dual channel support.
 
 	  Please read the comments at the top of
-	  <file:drivers/ide/alim15x3.c>.
+	  <file:drivers/ide/pci/alim15x3.c>.
 
 	  If unsure, say N.
 
@@ -528,7 +528,7 @@ config BLK_DEV_NS87415
 	  This driver adds detection and support for the NS87415 chip
 	  (used mainly on SPARC64 and PA-RISC machines).
 
-	  Please read the comments at the top of <file:drivers/ide/ns87415.c>.
+	  Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>.
 
 config BLK_DEV_PDC202XX_OLD
 	tristate "PROMISE PDC202{46|62|65|67} support"
@@ -547,7 +547,7 @@ config BLK_DEV_PDC202XX_OLD
 	  for more than one card.
 
 	  Please read the comments at the top of
-	  <file:drivers/ide/pdc202xx_old.c>.
+	  <file:drivers/ide/pci/pdc202xx_old.c>.
 
 	  If unsure, say N.
 
@@ -593,7 +593,7 @@ config BLK_DEV_SIS5513
 	  ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
 	  SiS745, SiS750
 
-	  Please read the comments at the top of <file:drivers/ide/sis5513.c>.
+	  Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>.
 
 config BLK_DEV_SL82C105
 	tristate "Winbond SL82c105 support"
@@ -616,7 +616,7 @@ config BLK_DEV_SLC90E66
 	  look-a-like to the PIIX4 it should be a nice addition.
 
 	  Please read the comments at the top of
-	  <file:drivers/ide/slc90e66.c>.
+	  <file:drivers/ide/pci/slc90e66.c>.
 
 config BLK_DEV_TRM290
 	tristate "Tekram TRM290 chipset support"
@@ -625,7 +625,7 @@ config BLK_DEV_TRM290
 	  This driver adds support for bus master DMA transfers
 	  using the Tekram TRM290 PCI IDE chip. Volunteers are
 	  needed for further tweaking and development.
-	  Please read the comments at the top of <file:drivers/ide/trm290.c>.
+	  Please read the comments at the top of <file:drivers/ide/pci/trm290.c>.
 
 config BLK_DEV_VIA82CXXX
 	tristate "VIA82CXXX chipset support"
@@ -836,7 +836,7 @@ config BLK_DEV_ALI14XX
 	  of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
 	  I/O speeds to be set as well.
 	  See the files <file:Documentation/ide/ide.txt> and
-	  <file:drivers/ide/ali14xx.c> for more info.
+	  <file:drivers/ide/legacy/ali14xx.c> for more info.
 
 config BLK_DEV_DTC2278
 	tristate "DTC-2278 support"
@@ -847,7 +847,7 @@ config BLK_DEV_DTC2278
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the DTC-2278 card, and permits faster I/O speeds to be set as
 	  well. See the <file:Documentation/ide/ide.txt> and
-	  <file:drivers/ide/dtc2278.c> files for more info.
+	  <file:drivers/ide/legacy/dtc2278.c> files for more info.
 
 config BLK_DEV_HT6560B
 	tristate "Holtek HT6560B support"
@@ -858,7 +858,7 @@ config BLK_DEV_HT6560B
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the Holtek card, and permits faster I/O speeds to be set as well.
 	  See the <file:Documentation/ide/ide.txt> and
-	  <file:drivers/ide/ht6560b.c> files for more info.
+	  <file:drivers/ide/legacy/ht6560b.c> files for more info.
 
 config BLK_DEV_QD65XX
 	tristate "QDI QD65xx support"
@@ -867,7 +867,7 @@ config BLK_DEV_QD65XX
 	help
 	  This driver is enabled at runtime using the "qd65xx.probe" kernel
 	  boot parameter.  It permits faster I/O speeds to be set.  See the
-	  <file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c>
+	  <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
 	  for more info.
 
 config BLK_DEV_UMC8672
@@ -879,7 +879,7 @@ config BLK_DEV_UMC8672
 	  boot parameter. It enables support for the secondary IDE interface
 	  of the UMC-8672, and permits faster I/O speeds to be set as well.
 	  See the files <file:Documentation/ide/ide.txt> and
-	  <file:drivers/ide/umc8672.c> for more info.
+	  <file:drivers/ide/legacy/umc8672.c> for more info.
 
 endif
 

trunk/drivers/net/bnx2x/bnx2x.h

@@ -239,19 +239,13 @@ void bnx2x_int_disable(struct bnx2x *bp);
  *  FUNC_N_CLID_X = N * NUM_SPECIAL_CLIENTS + FUNC_0_CLID_X
  *
  */
-enum {
-	BNX2X_ISCSI_ETH_CL_ID_IDX,
-	BNX2X_FCOE_ETH_CL_ID_IDX,
-	BNX2X_MAX_CNIC_ETH_CL_ID_IDX,
-};
+/* iSCSI L2 */
+#define BNX2X_ISCSI_ETH_CL_ID_IDX	1
+#define BNX2X_ISCSI_ETH_CID		49
 
-#define BNX2X_CNIC_START_ETH_CID	48
-enum {
-	/* iSCSI L2 */
-	BNX2X_ISCSI_ETH_CID = BNX2X_CNIC_START_ETH_CID,
-	/* FCoE L2 */
-	BNX2X_FCOE_ETH_CID,
-};
+/* FCoE L2 */
+#define BNX2X_FCOE_ETH_CL_ID_IDX	2
+#define BNX2X_FCOE_ETH_CID		50
 
 /** Additional rings budgeting */
 #ifdef BCM_CNIC

trunk/drivers/net/bnx2x/bnx2x_cmn.h

@@ -1297,7 +1297,7 @@ static inline void bnx2x_init_txdata(struct bnx2x *bp,
 static inline u8 bnx2x_cnic_eth_cl_id(struct bnx2x *bp, u8 cl_idx)
 {
 	return bp->cnic_base_cl_id + cl_idx +
-		(bp->pf_num >> 1) * BNX2X_MAX_CNIC_ETH_CL_ID_IDX;
+		(bp->pf_num >> 1) * NON_ETH_CONTEXT_USE;
 }
 
 static inline u8 bnx2x_cnic_fw_sb_id(struct bnx2x *bp)

trunk/drivers/net/can/mscan/mscan.c

@@ -261,13 +261,11 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		void __iomem *data = &regs->tx.dsr1_0;
 		u16 *payload = (u16 *)frame->data;
 
-		for (i = 0; i < frame->can_dlc / 2; i++) {
+		/* It is safe to write into dsr[dlc+1] */
+		for (i = 0; i < (frame->can_dlc + 1) / 2; i++) {
 			out_be16(data, *payload++);
 			data += 2 + _MSCAN_RESERVED_DSR_SIZE;
 		}
-		/* write remaining byte if necessary */
-		if (frame->can_dlc & 1)
-			out_8(data, frame->data[frame->can_dlc - 1]);
 	}
 
 	out_8(&regs->tx.dlr, frame->can_dlc);
@@ -332,13 +330,10 @@ static void mscan_get_rx_frame(struct net_device *dev, struct can_frame *frame)
 		void __iomem *data = &regs->rx.dsr1_0;
 		u16 *payload = (u16 *)frame->data;
 
-		for (i = 0; i < frame->can_dlc / 2; i++) {
+		for (i = 0; i < (frame->can_dlc + 1) / 2; i++) {
 			*payload++ = in_be16(data);
 			data += 2 + _MSCAN_RESERVED_DSR_SIZE;
 		}
-		/* read remaining byte if necessary */
-		if (frame->can_dlc & 1)
-			frame->data[frame->can_dlc - 1] = in_8(data);
 	}
 
 	out_8(&regs->canrflg, MSCAN_RXF);

trunk/drivers/net/mlx4/en_tx.c

@@ -172,7 +172,7 @@ int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv,
 	memset(ring->buf, 0, ring->buf_size);
 
 	ring->qp_state = MLX4_QP_STATE_RST;
-	ring->doorbell_qpn = ring->qp.qpn << 8;
+	ring->doorbell_qpn = swab32(ring->qp.qpn << 8);
 
 	mlx4_en_fill_qp_context(priv, ring->size, ring->stride, 1, 0, ring->qpn,
 				ring->cqn, &ring->context);
@@ -791,7 +791,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 		skb_orphan(skb);
 
 	if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tag) {
-		*(__be32 *) (&tx_desc->ctrl.vlan_tag) |= cpu_to_be32(ring->doorbell_qpn);
+		*(u32 *) (&tx_desc->ctrl.vlan_tag) |= ring->doorbell_qpn;
 		op_own |= htonl((bf_index & 0xffff) << 8);
 		/* Ensure new descirptor hits memory
 		* before setting ownership of this descriptor to HW */
@@ -812,7 +812,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
 		wmb();
 		tx_desc->ctrl.owner_opcode = op_own;
 		wmb();
-		iowrite32be(ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL);
+		writel(ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL);
 	}
 
 	/* Poll CQ here */

trunk/fs/btrfs/ioctl.c

@@ -1047,16 +1047,7 @@ int btrfs_defrag_file(struct inode *inode, struct file *file,
 	if (!max_to_defrag)
 		max_to_defrag = last_index - 1;
 
-	/*
-	 * make writeback starts from i, so the defrag range can be
-	 * written sequentially.
-	 */
-	if (i < inode->i_mapping->writeback_index)
-		inode->i_mapping->writeback_index = i;
-
-	while (i <= last_index && defrag_count < max_to_defrag &&
-	       (i < (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
-		PAGE_CACHE_SHIFT)) {
+	while (i <= last_index && defrag_count < max_to_defrag) {
 		/*
 		 * make sure we stop running if someone unmounts
 		 * the FS

trunk/net/ipv6/af_inet6.c

@@ -875,7 +875,6 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head,
 		skb_reset_transport_header(skb);
 		__skb_push(skb, skb_gro_offset(skb));
 
-		ops = rcu_dereference(inet6_protos[proto]);
 		if (!ops || !ops->gro_receive)
 			goto out_unlock;