---

yaml
---
r: 322552
b: refs/heads/master
c: 67ddbb3
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: bf71d0e18ea94adade8c6cd5bd40beb83bef1565
+refs/heads/master: 67ddbb3e6568fb1820b2cc45b00c50702b114801

trunk/Documentation/ABI/testing/sysfs-bus-pci

@@ -210,15 +210,3 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
-
-What:		/sys/bus/pci/devices/.../d3cold_allowed
-Date:		July 2012
-Contact:	Huang Ying <ying.huang@intel.com>
-Description:
-		d3cold_allowed is bit to control whether the corresponding PCI
-		device can be put into D3Cold state.  If it is cleared, the
-		device will never be put into D3Cold state.  If it is set, the
-		device may be put into D3Cold state if other requirements are
-		satisfied too.  Reading this attribute will show the current
-		value of d3cold_allowed bit.  Writing this attribute will set
-		the value of d3cold_allowed bit.

trunk/Documentation/block/00-INDEX

@@ -3,21 +3,15 @@
 biodoc.txt
 	- Notes on the Generic Block Layer Rewrite in Linux 2.5
 capability.txt
-	- Generic Block Device Capability (/sys/block/<device>/capability)
-cfq-iosched.txt
-	- CFQ IO scheduler tunables
-data-integrity.txt
-	- Block data integrity
+	- Generic Block Device Capability (/sys/block/<disk>/capability)
 deadline-iosched.txt
 	- Deadline IO scheduler tunables
 ioprio.txt
 	- Block io priorities (in CFQ scheduler)
-queue-sysfs.txt
-	- Queue's sysfs entries
 request.txt
 	- The members of struct request (in include/linux/blkdev.h)
 stat.txt
-	- Block layer statistics in /sys/block/<device>/stat
+	- Block layer statistics in /sys/block/<dev>/stat
 switching-sched.txt
 	- Switching I/O schedulers at runtime
 writeback_cache_control.txt

trunk/Documentation/block/cfq-iosched.txt

@@ -1,14 +1,3 @@
-CFQ (Complete Fairness Queueing)
-===============================
-
-The main aim of CFQ scheduler is to provide a fair allocation of the disk
-I/O bandwidth for all the processes which requests an I/O operation.
-
-CFQ maintains the per process queue for the processes which request I/O
-operation(syncronous requests). In case of asynchronous requests, all the
-requests from all the processes are batched together according to their
-process's I/O priority.
-
 CFQ ioscheduler tunables
 ========================
 
@@ -36,72 +25,6 @@ there are multiple spindles behind single LUN (Host based hardware RAID
 controller or for storage arrays), setting slice_idle=0 might end up in better
 throughput and acceptable latencies.
 
-back_seek_max
--------------
-This specifies, given in Kbytes, the maximum "distance" for backward seeking.
-The distance is the amount of space from the current head location to the
-sectors that are backward in terms of distance.
-
-This parameter allows the scheduler to anticipate requests in the "backward"
-direction and consider them as being the "next" if they are within this
-distance from the current head location.
-
-back_seek_penalty
------------------
-This parameter is used to compute the cost of backward seeking. If the
-backward distance of request is just 1/back_seek_penalty from a "front"
-request, then the seeking cost of two requests is considered equivalent.
-
-So scheduler will not bias toward one or the other request (otherwise scheduler
-will bias toward front request). Default value of back_seek_penalty is 2.
-
-fifo_expire_async
------------------
-This parameter is used to set the timeout of asynchronous requests. Default
-value of this is 248ms.
-
-fifo_expire_sync
-----------------
-This parameter is used to set the timeout of synchronous requests. Default
-value of this is 124ms. In case to favor synchronous requests over asynchronous
-one, this value should be decreased relative to fifo_expire_async.
-
-slice_async
------------
-This parameter is same as of slice_sync but for asynchronous queue. The
-default value is 40ms.
-
-slice_async_rq
---------------
-This parameter is used to limit the dispatching of asynchronous request to
-device request queue in queue's slice time. The maximum number of request that
-are allowed to be dispatched also depends upon the io priority. Default value
-for this is 2.
-
-slice_sync
-----------
-When a queue is selected for execution, the queues IO requests are only
-executed for a certain amount of time(time_slice) before switching to another
-queue. This parameter is used to calculate the time slice of synchronous
-queue.
-
-time_slice is computed using the below equation:-
-time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the
-time_slice of synchronous queue, increase the value of slice_sync. Default
-value is 100ms.
-
-quantum
--------
-This specifies the number of request dispatched to the device queue. In a
-queue's time slice, a request will not be dispatched if the number of request
-in the device exceeds this parameter. This parameter is used for synchronous
-request.
-
-In case of storage with several disk, this setting can limit the parallel
-processing of request. Therefore, increasing the value can imporve the
-performace although this can cause the latency of some I/O to increase due
-to more number of requests.
-
 CFQ IOPS Mode for group scheduling
 ===================================
 Basic CFQ design is to provide priority based time slices. Higher priority

trunk/Documentation/block/queue-sysfs.txt

@@ -9,71 +9,20 @@ These files are the ones found in the /sys/block/xxx/queue/ directory.
 Files denoted with a RO postfix are readonly and the RW postfix means
 read-write.
 
-add_random (RW)
-----------------
-This file allows to trun off the disk entropy contribution. Default
-value of this file is '1'(on).
-
-discard_granularity (RO)
------------------------
-This shows the size of internal allocation of the device in bytes, if
-reported by the device. A value of '0' means device does not support
-the discard functionality.
-
-discard_max_bytes (RO)
-----------------------
-Devices that support discard functionality may have internal limits on
-the number of bytes that can be trimmed or unmapped in a single operation.
-The discard_max_bytes parameter is set by the device driver to the maximum
-number of bytes that can be discarded in a single operation. Discard
-requests issued to the device must not exceed this limit. A discard_max_bytes
-value of 0 means that the device does not support discard functionality.
-
-discard_zeroes_data (RO)
-------------------------
-When read, this file will show if the discarded block are zeroed by the
-device or not. If its value is '1' the blocks are zeroed otherwise not.
-
 hw_sector_size (RO)
 -------------------
 This is the hardware sector size of the device, in bytes.
 
-iostats (RW)
--------------
-This file is used to control (on/off) the iostats accounting of the
-disk.
-
-logical_block_size (RO)
------------------------
-This is the logcal block size of the device, in bytes.
-
 max_hw_sectors_kb (RO)
 ----------------------
 This is the maximum number of kilobytes supported in a single data transfer.
 
-max_integrity_segments (RO)
----------------------------
-When read, this file shows the max limit of integrity segments as
-set by block layer which a hardware controller can handle.
-
 max_sectors_kb (RW)
 -------------------
 This is the maximum number of kilobytes that the block layer will allow
 for a filesystem request. Must be smaller than or equal to the maximum
 size allowed by the hardware.
 
-max_segments (RO)
------------------
-Maximum number of segments of the device.
-
-max_segment_size (RO)
----------------------
-Maximum segment size of the device.
-
-minimum_io_size (RO)
---------------------
-This is the smallest preferred io size reported by the device.
-
 nomerges (RW)
 -------------
 This enables the user to disable the lookup logic involved with IO
@@ -96,24 +45,11 @@ per-block-cgroup request pool.  IOW, if there are N block cgroups,
 each request queue may have upto N request pools, each independently
 regulated by nr_requests.
 
-optimal_io_size (RO)
---------------------
-This is the optimal io size reported by the device.
-
-physical_block_size (RO)
-------------------------
-This is the physical block size of device, in bytes.
-
 read_ahead_kb (RW)
 ------------------
 Maximum number of kilobytes to read-ahead for filesystems on this block
 device.
 
-rotational (RW)
----------------
-This file is used to stat if the device is of rotational type or
-non-rotational type.
-
 rq_affinity (RW)
 ----------------
 If this option is '1', the block layer will migrate request completions to the

trunk/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt

@@ -10,17 +10,17 @@ Required properties:
 - compatible : Should be "fsl,<chip>-esdhc"
 
 Optional properties:
-- fsl,cd-controller : Indicate to use controller internal card detection
-- fsl,wp-controller : Indicate to use controller internal write protection
+- fsl,cd-internal : Indicate to use controller internal card detection
+- fsl,wp-internal : Indicate to use controller internal write protection
 
 Examples:
 
 esdhc@70004000 {
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70004000 0x4000>;
 	interrupts = <1>;
-	fsl,cd-controller;
-	fsl,wp-controller;
+	fsl,cd-internal;
+	fsl,wp-internal;
 };
 
 esdhc@70008000 {

trunk/Documentation/feature-removal-schedule.txt

@@ -579,7 +579,7 @@ Why:	KVM tracepoints provide mostly equivalent information in a much more
 ----------------------------
 
 What:	at91-mci driver ("CONFIG_MMC_AT91")
-When:	3.8
+When:	3.7
 Why:	There are two mci drivers: at91-mci and atmel-mci. The PDC support
 	was added to atmel-mci as a first step to support more chips.
 	Then at91-mci was kept only for old IP versions (on at91rm9200 and

trunk/Documentation/watchdog/src/watchdog-test.c

@@ -31,7 +31,7 @@ static void keep_alive(void)
  * or "-e" to enable the card.
  */
 
-static void term(int sig)
+void term(int sig)
 {
     close(fd);
     fprintf(stderr, "Stopping watchdog ticks...\n");

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc3
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -2144,7 +2144,6 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
 	tristate "CPUfreq driver for i.MX CPUs"
 	depends on ARCH_MXC && CPU_FREQ
-	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 

trunk/arch/arm/boot/dts/am33xx.dtsi

@@ -154,10 +154,5 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
-
-		wdt2: wdt@44e35000 {
-			compatible = "ti,omap3-wdt";
-			ti,hwmods = "wd_timer2";
-		};
 	};
 };

trunk/arch/arm/boot/dts/at91sam9g25ek.dts

@@ -15,7 +15,7 @@
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
 	};
 
 	ahb {

trunk/arch/arm/boot/dts/imx51-babbage.dts

@@ -25,8 +25,8 @@
 		aips@70000000 { /* aips-1 */
 			spba@70000000 {
 				esdhc@70004000 { /* ESDHC1 */
-					fsl,cd-controller;
-					fsl,wp-controller;
+					fsl,cd-internal;
+					fsl,wp-internal;
 					status = "okay";
 				};
 

trunk/arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -41,12 +41,8 @@
 		};
 		power-blue {
 			label = "power:blue";
-			gpios = <&gpio1 10 0>;
-			linux,default-trigger = "timer";
-		};
-		power-red {
-			label = "power:red";
 			gpios = <&gpio1 11 0>;
+			linux,default-trigger = "timer";
 		};
 		usb1 {
 			label = "usb1:blue";

trunk/arch/arm/boot/dts/twl6030.dtsi

@@ -66,7 +66,6 @@
 
 	vcxio: regulator@8 {
 		compatible = "ti,twl6030-vcxio";
-		regulator-always-on;
 	};
 
 	vusb: regulator@9 {
@@ -75,12 +74,10 @@
 
 	v1v8: regulator@10 {
 		compatible = "ti,twl6030-v1v8";
-		regulator-always-on;
 	};
 
 	v2v1: regulator@11 {
 		compatible = "ti,twl6030-v2v1";
-		regulator-always-on;
 	};
 
 	clk32kg: regulator@12 {

trunk/arch/arm/configs/armadillo800eva_defconfig

@@ -33,7 +33,7 @@ CONFIG_AEABI=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 CONFIG_VFP=y

trunk/arch/arm/configs/u8500_defconfig

@@ -86,7 +86,6 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_LP5521=y
-CONFIG_LEDS_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
 CONFIG_RTC_DRV_PL031=y

trunk/arch/arm/mach-at91/at91rm9200_time.c

@@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void)
 	at91_st_read(AT91_ST_SR);
 
 	/* Make IRQs happen for the system timer */
-	setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
+	setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
 
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
 	 * directly for the clocksource and all clockevents, after adjusting