---

yaml
---
r: 323210
b: refs/heads/master
c: 6399413
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d638163099c86f65984d85aab7ddf2cf78fa3a16
+refs/heads/master: 63994137eb53bb0fc42ad180c0ce509d3eb3bdc9

trunk/MAINTAINERS

@@ -3552,11 +3552,12 @@ K:	\b(ABS|SYN)_MT_
 
 INTEL C600 SERIES SAS CONTROLLER DRIVER
 M:	Intel SCU Linux support <intel-linux-scu@intel.com>
+M:	Lukasz Dorau <lukasz.dorau@intel.com>
+M:	Maciej Patelczyk <maciej.patelczyk@intel.com>
 M:	Dave Jiang <dave.jiang@intel.com>
-M:	Ed Nadolski <edmund.nadolski@intel.com>
 L:	linux-scsi@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git
-S:	Maintained
+T:	git git://git.code.sf.net/p/intel-sas/isci
+S:	Supported
 F:	drivers/scsi/isci/
 F:	firmware/isci/
 

trunk/arch/arm/mach-orion5x/common.c

@@ -204,6 +204,13 @@ void __init orion5x_wdt_init(void)
 void __init orion5x_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
+
+	/*
+	 * Some Orion5x devices allocate their coherent buffers from atomic
+	 * context. Increase size of atomic coherent pool to make sure such
+	 * the allocations won't fail.
+	 */
+	init_dma_coherent_pool_size(SZ_1M);
 }
 
 int orion5x_tclk;

trunk/arch/arm/mm/dma-mapping.c

@@ -346,6 +346,8 @@ static int __init atomic_pool_init(void)
 		       (unsigned)pool->size / 1024);
 		return 0;
 	}
+
+	kfree(pages);
 no_pages:
 	kfree(bitmap);
 no_bitmap:

trunk/arch/c6x/include/asm/Kbuild

@@ -2,6 +2,7 @@ include include/asm-generic/Kbuild.asm
 
 generic-y += atomic.h
 generic-y += auxvec.h
+generic-y += barrier.h
 generic-y += bitsperlong.h
 generic-y += bugs.h
 generic-y += cputime.h

trunk/drivers/edac/i3200_edac.c

@@ -391,7 +391,7 @@ static int i3200_probe1(struct pci_dev *pdev, int dev_idx)
 		for (j = 0; j < nr_channels; j++) {
 			struct dimm_info *dimm = csrow->channels[j]->dimm;
 
-			dimm->nr_pages = nr_pages / nr_channels;
+			dimm->nr_pages = nr_pages;
 			dimm->grain = nr_pages << PAGE_SHIFT;
 			dimm->mtype = MEM_DDR2;
 			dimm->dtype = DEV_UNKNOWN;

trunk/drivers/edac/i5000_edac.c

@@ -1012,6 +1012,10 @@ static void handle_channel(struct i5000_pvt *pvt, int slot, int channel,
 			/* add the number of COLUMN bits */
 			addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
 
+			/* Dual-rank memories have twice the size */
+			if (dinfo->dual_rank)
+				addrBits++;
+
 			addrBits += 6;	/* add 64 bits per DIMM */
 			addrBits -= 20;	/* divide by 2^^20 */
 			addrBits -= 3;	/* 8 bits per bytes */

trunk/drivers/edac/sb_edac.c

@@ -513,7 +513,8 @@ static int get_dimm_config(struct mem_ctl_info *mci)
 {
 	struct sbridge_pvt *pvt = mci->pvt_info;
 	struct dimm_info *dimm;
-	int i, j, banks, ranks, rows, cols, size, npages;
+	unsigned i, j, banks, ranks, rows, cols, npages;
+	u64 size;
 	u32 reg;
 	enum edac_type mode;
 	enum mem_type mtype;
@@ -585,10 +586,10 @@ static int get_dimm_config(struct mem_ctl_info *mci)
 				cols = numcol(mtr);
 
 				/* DDR3 has 8 I/O banks */
-				size = (rows * cols * banks * ranks) >> (20 - 3);
+				size = ((u64)rows * cols * banks * ranks) >> (20 - 3);
 				npages = MiB_TO_PAGES(size);
 
-				edac_dbg(0, "mc#%d: channel %d, dimm %d, %d Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
+				edac_dbg(0, "mc#%d: channel %d, dimm %d, %Ld Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
 					 pvt->sbridge_dev->mc, i, j,
 					 size, npages,
 					 banks, ranks, rows, cols);

trunk/drivers/gpio/gpio-lpc32xx.c

@@ -308,6 +308,7 @@ static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
 {
 	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
 
+	__set_gpio_level_p012(group, pin, value);
 	__set_gpio_dir_p012(group, pin, 0);
 
 	return 0;
@@ -318,6 +319,7 @@ static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
 {
 	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
 
+	__set_gpio_level_p3(group, pin, value);
 	__set_gpio_dir_p3(group, pin, 0);
 
 	return 0;
@@ -326,6 +328,9 @@ static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
 static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
 	int value)
 {
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpo_level_p3(group, pin, value);
 	return 0;
 }
 

trunk/drivers/md/raid10.c

@@ -1512,14 +1512,16 @@ static int _enough(struct r10conf *conf, struct geom *geo, int ignore)
 	do {
 		int n = conf->copies;
 		int cnt = 0;
+		int this = first;
 		while (n--) {
-			if (conf->mirrors[first].rdev &&
-			    first != ignore)
+			if (conf->mirrors[this].rdev &&
+			    this != ignore)
 				cnt++;
-			first = (first+1) % geo->raid_disks;
+			this = (this+1) % geo->raid_disks;
 		}
 		if (cnt == 0)
 			return 0;
+		first = (first + geo->near_copies) % geo->raid_disks;
 	} while (first != 0);
 	return 1;
 }

trunk/drivers/md/raid5.c

@@ -1591,6 +1591,7 @@ static int resize_stripes(struct r5conf *conf, int newsize)
 		#ifdef CONFIG_MULTICORE_RAID456
 		init_waitqueue_head(&nsh->ops.wait_for_ops);
 		#endif
+		spin_lock_init(&nsh->stripe_lock);
 
 		list_add(&nsh->lru, &newstripes);
 	}

trunk/drivers/usb/core/devices.c

@@ -624,7 +624,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf,
 	/* print devices for all busses */
 	list_for_each_entry(bus, &usb_bus_list, bus_list) {
 		/* recurse through all children of the root hub */
-		if (!bus->root_hub)
+		if (!bus_to_hcd(bus)->rh_registered)
 			continue;
 		usb_lock_device(bus->root_hub);
 		ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos,

trunk/drivers/usb/core/hcd.c

@@ -1011,10 +1011,7 @@ static int register_root_hub(struct usb_hcd *hcd)
 	if (retval) {
 		dev_err (parent_dev, "can't register root hub for %s, %d\n",
 				dev_name(&usb_dev->dev), retval);
-	}
-	mutex_unlock(&usb_bus_list_lock);
-
-	if (retval == 0) {
+	} else {
 		spin_lock_irq (&hcd_root_hub_lock);
 		hcd->rh_registered = 1;
 		spin_unlock_irq (&hcd_root_hub_lock);
@@ -1023,6 +1020,7 @@ static int register_root_hub(struct usb_hcd *hcd)
 		if (HCD_DEAD(hcd))
 			usb_hc_died (hcd);	/* This time clean up */
 	}
+	mutex_unlock(&usb_bus_list_lock);
 
 	return retval;
 }

trunk/drivers/usb/host/ohci-at91.c

@@ -467,7 +467,8 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
 	/* From the GPIO notifying the over-current situation, find
 	 * out the corresponding port */
 	at91_for_each_port(port) {
-		if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) {
+		if (gpio_is_valid(pdata->overcurrent_pin[port]) &&
+				gpio_to_irq(pdata->overcurrent_pin[port]) == irq) {
 			gpio = pdata->overcurrent_pin[port];
 			break;
 		}

trunk/fs/dcache.c

@@ -1141,7 +1141,7 @@ int have_submounts(struct dentry *parent)
 EXPORT_SYMBOL(have_submounts);
 
 /*
- * Search the dentry child list for the specified parent,
+ * Search the dentry child list of the specified parent,
  * and move any unused dentries to the end of the unused
  * list for prune_dcache(). We descend to the next level
  * whenever the d_subdirs list is non-empty and continue

trunk/include/asm-generic/unistd.h

@@ -691,9 +691,11 @@ __SC_COMP(__NR_process_vm_readv, sys_process_vm_readv, \
 #define __NR_process_vm_writev 271
 __SC_COMP(__NR_process_vm_writev, sys_process_vm_writev, \
           compat_sys_process_vm_writev)
+#define __NR_kcmp 272
+__SYSCALL(__NR_kcmp, sys_kcmp)
 
 #undef __NR_syscalls
-#define __NR_syscalls 272
+#define __NR_syscalls 273
 
 /*
  * All syscalls below here should go away really,

trunk/sound/soc/codecs/wm2000.c

@@ -702,7 +702,7 @@ static bool wm2000_readable_reg(struct device *dev, unsigned int reg)
 }
 
 static const struct regmap_config wm2000_regmap = {
-	.reg_bits = 8,
+	.reg_bits = 16,
 	.val_bits = 8,
 
 	.max_register = WM2000_REG_IF_CTL,

trunk/sound/usb/endpoint.c

@@ -197,7 +197,13 @@ static void prepare_outbound_urb(struct snd_usb_endpoint *ep,
 			/* no data provider, so send silence */
 			unsigned int offs = 0;
 			for (i = 0; i < ctx->packets; ++i) {
-				int counts = ctx->packet_size[i];
+				int counts;
+
+				if (ctx->packet_size[i])
+					counts = ctx->packet_size[i];
+				else
+					counts = snd_usb_endpoint_next_packet_size(ep);
+
 				urb->iso_frame_desc[i].offset = offs * ep->stride;
 				urb->iso_frame_desc[i].length = counts * ep->stride;
 				offs += counts;