---

yaml
---
r: 144502
b: refs/heads/master
c: 9232fcc
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 5876ee950f28612814cc4e01c5549718f8b79dce
+refs/heads/master: 9232fcc99948e39d5be04fc1c1025bd4f7998739

trunk/Documentation/ABI/testing/sysfs-firmware-acpi

@@ -69,13 +69,9 @@ Description:
 		gpe1F:	     0	invalid
 		gpe_all:    1192
 		sci:	1194
-		sci_not:     0	
 
-		sci - The number of times the ACPI SCI
-		has been called and claimed an interrupt.
-
-		sci_not - The number of times the ACPI SCI
-		has been called and NOT claimed an interrupt.
+		sci - The total number of times the ACPI SCI
+		has claimed an interrupt.
 
 		gpe_all - count of SCI caused by GPEs.
 

trunk/Documentation/laptops/thinkpad-acpi.txt

@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.23
-                          April 10th, 2009
+                            Version 0.22
+                        November 23rd,  2008
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>

trunk/Documentation/powerpc/booting-without-of.txt

@@ -43,11 +43,12 @@ Table of Contents
     2) Representing devices without a current OF specification
       a) PHY nodes
       b) Interrupt controllers
-      c) 4xx/Axon EMAC ethernet nodes
-      d) Xilinx IP cores
-      e) USB EHCI controllers
-      f) MDIO on GPIOs
-      g) SPI busses
+      c) CFI or JEDEC memory-mapped NOR flash
+      d) 4xx/Axon EMAC ethernet nodes
+      e) Xilinx IP cores
+      f) USB EHCI controllers
+      g) MDIO on GPIOs
+      h) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -998,7 +999,7 @@ compatibility.
       translation of SOC addresses for memory mapped SOC registers.
     - bus-frequency: Contains the bus frequency for the SOC node.
       Typically, the value of this field is filled in by the boot
-      loader.
+      loader. 
 
 
   Recommended properties:
@@ -1286,7 +1287,71 @@ platforms are moved over to use the flattened-device-tree model.
 		device_type = "open-pic";
 	};
 
-    c) 4xx/Axon EMAC ethernet nodes
+   c) CFI or JEDEC memory-mapped NOR flash
+
+    Flash chips (Memory Technology Devices) are often used for solid state
+    file systems on embedded devices.
+
+     - compatible : should contain the specific model of flash chip(s)
+       used, if known, followed by either "cfi-flash" or "jedec-flash"
+     - reg : Address range of the flash chip
+     - bank-width : Width (in bytes) of the flash bank.  Equal to the
+       device width times the number of interleaved chips.
+     - device-width : (optional) Width of a single flash chip.  If
+       omitted, assumed to be equal to 'bank-width'.
+     - #address-cells, #size-cells : Must be present if the flash has
+       sub-nodes representing partitions (see below).  In this case
+       both #address-cells and #size-cells must be equal to 1.
+
+    For JEDEC compatible devices, the following additional properties
+    are defined:
+
+     - vendor-id : Contains the flash chip's vendor id (1 byte).
+     - device-id : Contains the flash chip's device id (1 byte).
+
+    In addition to the information on the flash bank itself, the
+    device tree may optionally contain additional information
+    describing partitions of the flash address space.  This can be
+    used on platforms which have strong conventions about which
+    portions of the flash are used for what purposes, but which don't
+    use an on-flash partition table such as RedBoot.
+
+    Each partition is represented as a sub-node of the flash device.
+    Each node's name represents the name of the corresponding
+    partition of the flash device.
+
+    Flash partitions
+     - reg : The partition's offset and size within the flash bank.
+     - label : (optional) The label / name for this flash partition.
+       If omitted, the label is taken from the node name (excluding
+       the unit address).
+     - read-only : (optional) This parameter, if present, is a hint to
+       Linux that this flash partition should only be mounted
+       read-only.  This is usually used for flash partitions
+       containing early-boot firmware images or data which should not
+       be clobbered.
+
+    Example:
+
+	flash@ff000000 {
+		compatible = "amd,am29lv128ml", "cfi-flash";
+		reg = <ff000000 01000000>;
+		bank-width = <4>;
+		device-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		fs@0 {
+			label = "fs";
+			reg = <0 f80000>;
+		};
+		firmware@f80000 {
+			label ="firmware";
+			reg = <f80000 80000>;
+			read-only;
+		};
+	};
+
+    d) 4xx/Axon EMAC ethernet nodes
 
     The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
     the Axon bridge.  To operate this needs to interact with a ths
@@ -1434,7 +1499,7 @@ platforms are moved over to use the flattened-device-tree model.
 			   available.
 			   For Axon: 0x0000012a
 
-   d) Xilinx IP cores
+   e) Xilinx IP cores
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
@@ -1696,7 +1761,7 @@ platforms are moved over to use the flattened-device-tree model.
       listed above, nodes for these devices should include a phy-handle
       property, and may include other common network device properties
       like local-mac-address.
-
+      
       iv) Xilinx Uartlite
 
       Xilinx uartlite devices are simple fixed speed serial ports.
@@ -1728,7 +1793,7 @@ platforms are moved over to use the flattened-device-tree model.
        - reg-offset : A value of 3 is required
        - reg-shift : A value of 2 is required
 
-    e) USB EHCI controllers
+    f) USB EHCI controllers
 
     Required properties:
       - compatible : should be "usb-ehci".
@@ -1754,7 +1819,7 @@ platforms are moved over to use the flattened-device-tree model.
 		   big-endian;
 	   };
 
-   f) MDIO on GPIOs
+   g) MDIO on GPIOs
 
    Currently defined compatibles:
    - virtual,gpio-mdio
@@ -1774,7 +1839,7 @@ platforms are moved over to use the flattened-device-tree model.
 			 &qe_pio_c 6>;
 	};
 
-    g) SPI (Serial Peripheral Interface) busses
+    h) SPI (Serial Peripheral Interface) busses
 
     SPI busses can be described with a node for the SPI master device
     and a set of child nodes for each SPI slave on the bus.  For this

trunk/MAINTAINERS

@@ -1337,9 +1337,12 @@ L:	cbe-oss-dev@ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
 F:	arch/powerpc/include/asm/cell*.h
+F:	arch/powerpc/include/asm/lv1call.h
+F:	arch/powerpc/include/asm/ps3*.h
 F:	arch/powerpc/include/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
+F:	arch/powerpc/platforms/ps3/
 
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
 P:	David Vrabel
@@ -2758,7 +2761,7 @@ IDE SUBSYSTEM
 P:	Bartlomiej Zolnierkiewicz
 M:	bzolnier@gmail.com
 L:	linux-ide@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git
+T:	quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
 S:	Maintained
 F:	Documentation/ide/
 F:	drivers/ide/
@@ -3991,8 +3994,8 @@ NETWORKING [GENERAL]
 P:	David S. Miller
 M:	davem@davemloft.net
 L:	netdev@vger.kernel.org
-W:	http://www.linuxfoundation.org/en/Net
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+W:	http://linux-net.osdl.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
 F:	net/
 F:	include/net/
@@ -4033,13 +4036,6 @@ F:	net/wireless/
 F:	include/net/ieee80211*
 F:	include/net/wireless.h
 
-NETWORKING DRIVERS
-L:	netdev@vger.kernel.org
-W:	http://www.linuxfoundation.org/en/Net
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
-S:	Odd Fixes
-F:	drivers/net/
-
 NETXEN (1/10) GbE SUPPORT
 P:	Dhananjay Phadke
 M:	dhananjay@netxen.com
@@ -4511,9 +4507,7 @@ F:	arch/powerpc/include/asm/ps3*.h
 F:	arch/powerpc/platforms/ps3/
 F:	drivers/*/ps3*
 F:	drivers/ps3/
-F:	drivers/rtc/rtc-ps3.c
 F:	drivers/usb/host/*ps3.c
-F:	sound/ppc/snd_ps3*
 
 PS3VRAM DRIVER
 P:	Jim Paris

trunk/arch/arm/Kconfig

@@ -585,6 +585,7 @@ config ARCH_DAVINCI
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	select ZONE_DMA
+	select HAVE_IDE
 	help
 	  Support for TI's DaVinci platform.