---

yaml --- r: 232437 b: refs/heads/master c: b17b849 h: refs/heads/master i: 232435: 82109f8 v: v3
git-mirror · Jan 27, 2011 · 7df583a · 7df583a
1 parent 4dbc3e1
commit 7df583a
Show file tree

Hide file tree

Showing 131 changed files with 1,764 additions and 664 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c3810c88788d505d4ffd786addd111b745e42161
+refs/heads/master: b17b849946e581ad58af74933d4fb63ad8812937
diff --git a/trunk/.mailmap b/trunk/.mailmap
@@ -23,6 +23,7 @@ Andy Adamson <andros@citi.umich.edu>
 Arnaud Patard <arnaud.patard@rtp-net.org>
 Arnd Bergmann <arnd@arndb.de>
 Axel Dyks <xl@xlsigned.net>
+Axel Lin <axel.lin@gmail.com>
 Ben Gardner <bgardner@wabtec.com>
 Ben M Cahill <ben.m.cahill@intel.com>
 Björn Steinbrink <B.Steinbrink@gmx.de>

diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
@@ -43,11 +43,11 @@ parameter is applicable:
 	AVR32	AVR32 architecture is enabled.
 	AX25	Appropriate AX.25 support is enabled.
 	BLACKFIN Blackfin architecture is enabled.
+	DRM	Direct Rendering Management support is enabled.
+	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
 	EFI	EFI Partitioning (GPT) is enabled
 	EIDE	EIDE/ATAPI support is enabled.
-	DRM	Direct Rendering Management support is enabled.
-	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	FB	The frame buffer device is enabled.
 	GCOV	GCOV profiling is enabled.
 	HW	Appropriate hardware is enabled.

diff --git a/trunk/arch/arm/include/asm/hardware/sp810.h b/trunk/arch/arm/include/asm/hardware/sp810.h
@@ -50,6 +50,12 @@
 #define SCPCELLID2		0xFF8
 #define SCPCELLID3		0xFFC
 
+#define SCCTRL_TIMEREN0SEL_REFCLK	(0 << 15)
+#define SCCTRL_TIMEREN0SEL_TIMCLK	(1 << 15)
+
+#define SCCTRL_TIMEREN1SEL_REFCLK	(0 << 17)
+#define SCCTRL_TIMEREN1SEL_TIMCLK	(1 << 17)
+
 static inline void sysctl_soft_reset(void __iomem *base)
 {
 	/* writing any value to SCSYSSTAT reg will reset system */

diff --git a/trunk/arch/arm/include/asm/memory.h b/trunk/arch/arm/include/asm/memory.h
@@ -188,7 +188,7 @@
  * translation for translating DMA addresses.  Use the driver
  * DMA support - see dma-mapping.h.
  */
-static inline unsigned long virt_to_phys(void *x)
+static inline unsigned long virt_to_phys(const volatile void *x)
 {
 	return __virt_to_phys((unsigned long)(x));
 }

diff --git a/trunk/arch/arm/kernel/smp_twd.c b/trunk/arch/arm/kernel/smp_twd.c
@@ -36,6 +36,7 @@ static void twd_set_mode(enum clock_event_mode mode,
 		/* timer load already set up */
 		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
 			| TWD_TIMER_CONTROL_PERIODIC;
+		__raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* period set, and timer enabled in 'next_event' hook */
@@ -81,7 +82,7 @@ int twd_timer_ack(void)
 
 static void __cpuinit twd_calibrate_rate(void)
 {
-	unsigned long load, count;
+	unsigned long count;
 	u64 waitjiffies;
 
 	/*
@@ -116,10 +117,6 @@ static void __cpuinit twd_calibrate_rate(void)
 		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
 			(twd_timer_rate / 1000000) % 100);
 	}
-
-	load = twd_timer_rate / HZ;
-
-	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
 }
 
 /*

diff --git a/trunk/arch/arm/mach-ep93xx/gpio.c b/trunk/arch/arm/mach-ep93xx/gpio.c
@@ -427,6 +427,13 @@ void __init ep93xx_gpio_init(void)
 {
 	int i;
 
+	/* Set Ports C, D, E, G, and H for GPIO use */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+				 EP93XX_SYSCON_DEVCFG_GONK |
+				 EP93XX_SYSCON_DEVCFG_EONIDE |
+				 EP93XX_SYSCON_DEVCFG_GONIDE |
+				 EP93XX_SYSCON_DEVCFG_HONIDE);
+
 	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++)
 		gpiochip_add(&ep93xx_gpio_banks[i].chip);
 }
diff --git a/trunk/arch/arm/mach-omap2/pm24xx.c b/trunk/arch/arm/mach-omap2/pm24xx.c
@@ -134,7 +134,7 @@ static void omap2_enter_full_retention(void)
 
 	/* Block console output in case it is on one of the OMAP UARTs */
 	if (!is_suspending())
-		if (try_acquire_console_sem())
+		if (!console_trylock())
 			goto no_sleep;
 
 	omap_uart_prepare_idle(0);
@@ -151,7 +151,7 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(0);
 
 	if (!is_suspending())
-		release_console_sem();
+		console_unlock();
 
 no_sleep:
 	if (omap2_pm_debug) {

diff --git a/trunk/arch/arm/mach-omap2/pm34xx.c b/trunk/arch/arm/mach-omap2/pm34xx.c
@@ -398,7 +398,7 @@ void omap_sram_idle(void)
 	if (!is_suspending())
 		if (per_next_state < PWRDM_POWER_ON ||
 		    core_next_state < PWRDM_POWER_ON)
-			if (try_acquire_console_sem())
+			if (!console_trylock())
 				goto console_still_active;
 
 	/* PER */
@@ -481,7 +481,7 @@ void omap_sram_idle(void)
 	}
 
 	if (!is_suspending())
-		release_console_sem();
+		console_unlock();
 
 console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */

diff --git a/trunk/arch/arm/mach-omap2/serial.c b/trunk/arch/arm/mach-omap2/serial.c
@@ -812,7 +812,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 
 	oh->dev_attr = uart;
 
-	acquire_console_sem(); /* in case the earlycon is on the UART */
+	console_lock(); /* in case the earlycon is on the UART */
 
 	/*
 	 * Because of early UART probing, UART did not get idled
@@ -838,7 +838,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 	omap_uart_block_sleep(uart);
 	uart->timeout = DEFAULT_TIMEOUT;
 
-	release_console_sem();
+	console_unlock();
 
 	if ((cpu_is_omap34xx() && uart->padconf) ||
 	    (uart->wk_en && uart->wk_mask)) {

diff --git a/trunk/arch/arm/mach-realview/Kconfig b/trunk/arch/arm/mach-realview/Kconfig
@@ -2,52 +2,56 @@ menu "RealView platform type"
 	depends on ARCH_REALVIEW
 
 config MACH_REALVIEW_EB
-	bool "Support RealView/EB platform"
+	bool "Support RealView(R) Emulation Baseboard"
 	select ARM_GIC
 	help
-	  Include support for the ARM(R) RealView Emulation Baseboard platform.
+	  Include support for the ARM(R) RealView(R) Emulation Baseboard
+	  platform.
 
 config REALVIEW_EB_A9MP
-	bool "Support Multicore Cortex-A9"
+	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
 	help
-	  Enable support for the Cortex-A9MPCore tile on the Realview platform.
+	  Enable support for the Cortex-A9MPCore tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
 
 config REALVIEW_EB_ARM11MP
-	bool "Support ARM11MPCore tile"
+	bool "Support ARM11MPCore Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V6
 	select ARCH_HAS_BARRIERS if SMP
 	help
-	  Enable support for the ARM11MPCore tile on the Realview platform.
+	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
+	  Emulation Baseboard platform.
 
 config REALVIEW_EB_ARM11MP_REVB
-	bool "Support ARM11MPCore RevB tile"
+	bool "Support ARM11MPCore RevB Tile"
 	depends on REALVIEW_EB_ARM11MP
 	help
-	  Enable support for the ARM11MPCore RevB tile on the Realview
-	  platform. Since there are device address differences, a
-	  kernel built with this option enabled is not compatible with
-	  other revisions of the ARM11MPCore tile.
+	  Enable support for the ARM11MPCore Revision B tile on the
+	  Realview(R) Emulation Baseboard platform. Since there are device
+	  address differences, a kernel built with this option enabled is
+	  not compatible with other revisions of the ARM11MPCore tile.
 
 config MACH_REALVIEW_PB11MP
-	bool "Support RealView/PB11MPCore platform"
+	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
 	select CPU_V6
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
 	select ARCH_HAS_BARRIERS if SMP
 	help
-	  Include support for the ARM(R) RealView MPCore Platform Baseboard.
-	  PB11MPCore is a platform with an on-board ARM11MPCore and has
+	  Include support for the ARM(R) RealView(R) Platform Baseboard for
+	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
 	  support for PCI-E and Compact Flash.
 
 config MACH_REALVIEW_PB1176
-	bool "Support RealView/PB1176 platform"
+	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
 	select CPU_V6
 	select ARM_GIC
 	help
-	  Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
+	  Include support for the ARM(R) RealView(R) Platform Baseboard for
+	  ARM1176JZF-S.
 
 config REALVIEW_PB1176_SECURE_FLASH
 	bool "Allow access to the secure flash memory block"
@@ -59,23 +63,24 @@ config REALVIEW_PB1176_SECURE_FLASH
 	  block (64MB @ 0x3c000000) is required.
 
 config MACH_REALVIEW_PBA8
-	bool "Support RealView/PB-A8 platform"
+	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
 	help
-	  Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard.
-	  PB-A8 is a platform with an on-board Cortex-A8 and has support for
-	  PCI-E and Compact Flash.
+	  Include support for the ARM(R) RealView Platform Baseboard for
+	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
+	  support for PCI-E and Compact Flash.
 
 config MACH_REALVIEW_PBX
-	bool "Support RealView/PBX platform"
+	bool "Support RealView(R) Platform Baseboard Explore"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
 	help
-	  Include support for the ARM(R) RealView PBX platform.
+	  Include support for the ARM(R) RealView(R) Platform Baseboard
+	  Explore.
 
 config REALVIEW_HIGH_PHYS_OFFSET
 	bool "High physical base address for the RealView platform"

diff --git a/trunk/arch/arm/mach-realview/platsmp.c b/trunk/arch/arm/mach-realview/platsmp.c
@@ -41,7 +41,7 @@ volatile int __cpuinitdata pen_release = -1;
  * observers, irrespective of whether they're taking part in coherency
  * or not.  This is necessary for the hotplug code to work reliably.
  */
-static void write_pen_release(int val)
+static void __cpuinit write_pen_release(int val)
 {
 	pen_release = val;
 	smp_wmb();

diff --git a/trunk/arch/arm/mach-shmobile/Kconfig b/trunk/arch/arm/mach-shmobile/Kconfig
@@ -60,6 +60,8 @@ endchoice
 
 config MACH_AG5EVM
 	bool "AG5EVM board"
+	select ARCH_REQUIRE_GPIOLIB
+	select SH_LCD_MIPI_DSI
 	depends on ARCH_SH73A0
 
 config MACH_MACKEREL