[SCSI] lpfc 8.3.33: Formally separate lpfc_sli_ring SLI-3 and SLI-4 v…

…ariantions

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/lpfc/lpfc_debugfs.c

@@ -490,9 +490,11 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
 		len +=  snprintf(buf+len, size-len,
 				 "Ring %d: CMD GetInx:%d (Max:%d Next:%d "
 				 "Local:%d flg:x%x)  RSP PutInx:%d Max:%d\n",
-				 i, pgpp->cmdGetInx, pring->numCiocb,
-				 pring->next_cmdidx, pring->local_getidx,
-				 pring->flag, pgpp->rspPutInx, pring->numRiocb);
+				 i, pgpp->cmdGetInx, pring->sli.sli3.numCiocb,
+				 pring->sli.sli3.next_cmdidx,
+				 pring->sli.sli3.local_getidx,
+				 pring->flag, pgpp->rspPutInx,
+				 pring->sli.sli3.numRiocb);
 	}
 
 	if (phba->sli_rev <= LPFC_SLI_REV3) {

drivers/scsi/lpfc/lpfc_init.c

@@ -480,11 +480,11 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	phba->link_state = LPFC_LINK_DOWN;
 
 	/* Only process IOCBs on ELS ring till hba_state is READY */
-	if (psli->ring[psli->extra_ring].cmdringaddr)
+	if (psli->ring[psli->extra_ring].sli.sli3.cmdringaddr)
 		psli->ring[psli->extra_ring].flag |= LPFC_STOP_IOCB_EVENT;
-	if (psli->ring[psli->fcp_ring].cmdringaddr)
+	if (psli->ring[psli->fcp_ring].sli.sli3.cmdringaddr)
 		psli->ring[psli->fcp_ring].flag |= LPFC_STOP_IOCB_EVENT;
-	if (psli->ring[psli->next_ring].cmdringaddr)
+	if (psli->ring[psli->next_ring].sli.sli3.cmdringaddr)
 		psli->ring[psli->next_ring].flag |= LPFC_STOP_IOCB_EVENT;
 
 	/* Post receive buffers for desired rings */

drivers/scsi/lpfc/lpfc_mbox.c

@@ -950,44 +950,47 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba)
 	for (i = 0; i < psli->num_rings; i++) {
 		pring = &psli->ring[i];
 
-		pring->sizeCiocb = phba->sli_rev == 3 ? SLI3_IOCB_CMD_SIZE:
+		pring->sli.sli3.sizeCiocb =
+			phba->sli_rev == 3 ? SLI3_IOCB_CMD_SIZE :
 							SLI2_IOCB_CMD_SIZE;
-		pring->sizeRiocb = phba->sli_rev == 3 ? SLI3_IOCB_RSP_SIZE:
+		pring->sli.sli3.sizeRiocb =
+			phba->sli_rev == 3 ? SLI3_IOCB_RSP_SIZE :
 							SLI2_IOCB_RSP_SIZE;
 		/* A ring MUST have both cmd and rsp entries defined to be
 		   valid */
-		if ((pring->numCiocb == 0) || (pring->numRiocb == 0)) {
+		if ((pring->sli.sli3.numCiocb == 0) ||
+			(pring->sli.sli3.numRiocb == 0)) {
 			pcbp->rdsc[i].cmdEntries = 0;
 			pcbp->rdsc[i].rspEntries = 0;
 			pcbp->rdsc[i].cmdAddrHigh = 0;
 			pcbp->rdsc[i].rspAddrHigh = 0;
 			pcbp->rdsc[i].cmdAddrLow = 0;
 			pcbp->rdsc[i].rspAddrLow = 0;
-			pring->cmdringaddr = NULL;
-			pring->rspringaddr = NULL;
+			pring->sli.sli3.cmdringaddr = NULL;
+			pring->sli.sli3.rspringaddr = NULL;
 			continue;
 		}
 		/* Command ring setup for ring */
-		pring->cmdringaddr = (void *)&phba->IOCBs[iocbCnt];
-		pcbp->rdsc[i].cmdEntries = pring->numCiocb;
+		pring->sli.sli3.cmdringaddr = (void *)&phba->IOCBs[iocbCnt];
+		pcbp->rdsc[i].cmdEntries = pring->sli.sli3.numCiocb;
 
 		offset = (uint8_t *) &phba->IOCBs[iocbCnt] -
 			 (uint8_t *) phba->slim2p.virt;
 		pdma_addr = phba->slim2p.phys + offset;
 		pcbp->rdsc[i].cmdAddrHigh = putPaddrHigh(pdma_addr);
 		pcbp->rdsc[i].cmdAddrLow = putPaddrLow(pdma_addr);
-		iocbCnt += pring->numCiocb;
+		iocbCnt += pring->sli.sli3.numCiocb;
 
 		/* Response ring setup for ring */
-		pring->rspringaddr = (void *) &phba->IOCBs[iocbCnt];
+		pring->sli.sli3.rspringaddr = (void *) &phba->IOCBs[iocbCnt];
 
-		pcbp->rdsc[i].rspEntries = pring->numRiocb;
+		pcbp->rdsc[i].rspEntries = pring->sli.sli3.numRiocb;
 		offset = (uint8_t *)&phba->IOCBs[iocbCnt] -
 			 (uint8_t *)phba->slim2p.virt;
 		pdma_addr = phba->slim2p.phys + offset;
 		pcbp->rdsc[i].rspAddrHigh = putPaddrHigh(pdma_addr);
 		pcbp->rdsc[i].rspAddrLow = putPaddrLow(pdma_addr);
-		iocbCnt += pring->numRiocb;
+		iocbCnt += pring->sli.sli3.numRiocb;
 	}
 }