Merge branch 'topic/asoc' into for-linus

MAINTAINERS

@@ -5854,7 +5854,7 @@ F:	include/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-M:	Liam Girdwood <lrg@slimlogic.co.uk>
+M:	Liam Girdwood <lrg@ti.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -6105,7 +6105,7 @@ F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
 TI TWL4030 SERIES SOC CODEC DRIVER
-M:	Peter Ujfalusi <peter.ujfalusi@nokia.com>
+M:	Peter Ujfalusi <peter.ujfalusi@ti.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
 F:	sound/soc/codecs/twl4030*
@@ -6749,7 +6749,7 @@ F:	drivers/scsi/vmw_pvscsi.c
 F:	drivers/scsi/vmw_pvscsi.h
 
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
-M:	Liam Girdwood <lrg@slimlogic.co.uk>
+M:	Liam Girdwood <lrg@ti.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 W:	http://opensource.wolfsonmicro.com/node/15
 W:	http://www.slimlogic.co.uk/?p=48

arch/arm/mach-tegra/Kconfig

@@ -27,12 +27,14 @@ comment "Tegra board type"
 
 config MACH_HARMONY
        bool "Harmony board"
+       select MACH_HAS_SND_SOC_TEGRA_WM8903
        help
          Support for nVidia Harmony development platform
 
 config MACH_KAEN
        bool "Kaen board"
        select MACH_SEABOARD
+       select MACH_HAS_SND_SOC_TEGRA_WM8903
        help
          Support for the Kaen version of Seaboard
 
@@ -43,6 +45,7 @@ config MACH_PAZ00
 
 config MACH_SEABOARD
        bool "Seaboard board"
+       select MACH_HAS_SND_SOC_TEGRA_WM8903
        help
          Support for nVidia Seaboard development platform. It will
 	 also be included for some of the derivative boards that

arch/arm/mach-tegra/board-harmony.c

@@ -34,7 +34,7 @@
 #include <asm/mach/time.h>
 #include <asm/setup.h>
 
-#include <mach/harmony_audio.h>
+#include <mach/tegra_wm8903_pdata.h>
 #include <mach/iomap.h>
 #include <mach/irqs.h>
 #include <mach/sdhci.h>
@@ -67,15 +67,16 @@ static struct platform_device debug_uart = {
 	},
 };
 
-static struct harmony_audio_platform_data harmony_audio_pdata = {
+static struct tegra_wm8903_platform_data harmony_audio_pdata = {
 	.gpio_spkr_en		= TEGRA_GPIO_SPKR_EN,
 	.gpio_hp_det		= TEGRA_GPIO_HP_DET,
+	.gpio_hp_mute		= -1,
 	.gpio_int_mic_en	= TEGRA_GPIO_INT_MIC_EN,
 	.gpio_ext_mic_en	= TEGRA_GPIO_EXT_MIC_EN,
 };
 
 static struct platform_device harmony_audio_device = {
-	.name	= "tegra-snd-harmony",
+	.name	= "tegra-snd-wm8903",
 	.id	= 0,
 	.dev	= {
 		.platform_data  = &harmony_audio_pdata,

arch/arm/mach-tegra/include/mach/harmony_audio.h → arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-tegra/include/mach/harmony_audio.h
+ * arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h
  *
  * Copyright 2011 NVIDIA, Inc.
  *
@@ -14,9 +14,10 @@
  *
  */
 
-struct harmony_audio_platform_data {
+struct tegra_wm8903_platform_data {
 	int gpio_spkr_en;
 	int gpio_hp_det;
+	int gpio_hp_mute;
 	int gpio_int_mic_en;
 	int gpio_ext_mic_en;
 };

drivers/staging/intel_sst/intel_sst_drv_interface.c

@@ -508,7 +508,6 @@ int register_sst_card(struct intel_sst_card_ops *card)
 			sst_drv_ctx->pmic_state = SND_MAD_INIT_DONE;
 			sst_drv_ctx->rx_time_slot_status = 0; /*default AMIC*/
 			card->pcm_control = sst_pmic_ops.pcm_control;
-			sst_drv_ctx->scard_ops->card_status = SND_CARD_UN_INIT;
 			return 0;
 		} else {
 			pr_err("strcmp fail %s\n", card->module_name);

drivers/staging/intel_sst/intelmid.c

@@ -32,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/firmware.h>
 #include <sound/control.h>
 #include <asm/mrst.h>
 #include <sound/pcm.h>
@@ -40,6 +41,8 @@
 #include <sound/initval.h>
 #include "intel_sst.h"
 #include "intel_sst_ioctl.h"
+#include "intel_sst_fw_ipc.h"
+#include "intel_sst_common.h"
 #include "intelmid_snd_control.h"
 #include "intelmid.h"
 
@@ -802,6 +805,7 @@ static int __devinit snd_intelmad_sst_register(
 		pr_err("sst card registration failed\n");
 		return ret_val;
 	}
+	sst_drv_ctx->scard_ops->card_status = SND_CARD_UN_INIT;
 
 	sst_card_vendor_id = intelmaddata->sstdrv_ops->vendor_id;
 	intelmaddata->pmic_status = PMIC_UNINIT;

include/linux/mfd/wm8994/pdata.h

@@ -32,6 +32,10 @@ struct wm8994_ldo_pdata {
 #define WM8994_EQ_REGS  20
 #define WM8958_MBC_CUTOFF_REGS 20
 #define WM8958_MBC_COEFF_REGS  48
+#define WM8958_MBC_COMBINED_REGS 56
+#define WM8958_VSS_HPF_REGS 2
+#define WM8958_VSS_REGS 148
+#define WM8958_ENH_EQ_REGS 32
 
 /**
  * DRC configurations are specified with a label and a set of register
@@ -71,6 +75,42 @@ struct wm8958_mbc_cfg {
 	const char *name;
 	u16 cutoff_regs[WM8958_MBC_CUTOFF_REGS];
 	u16 coeff_regs[WM8958_MBC_COEFF_REGS];
+
+	/* Coefficient layout when using MBC+VSS firmware */
+	u16 combined_regs[WM8958_MBC_COMBINED_REGS];
+};
+
+/**
+ * VSS HPF configurations are specified with a label and two values to
+ * write.  Configurations are expected to be generated using the
+ * multiband compressor configuration panel in WISCE - see
+ * http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8958_vss_hpf_cfg {
+	const char *name;
+	u16 regs[WM8958_VSS_HPF_REGS];
+};
+
+/**
+ * VSS configurations are specified with a label and array of values
+ * to write.  Configurations are expected to be generated using the
+ * multiband compressor configuration panel in WISCE - see
+ * http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8958_vss_cfg {
+	const char *name;
+	u16 regs[WM8958_VSS_REGS];
+};
+
+/**
+ * Enhanced EQ configurations are specified with a label and array of
+ * values to write.  Configurations are expected to be generated using
+ * the multiband compressor configuration panel in WISCE - see
+ * http://www.wolfsonmicro.com/wisce/
+ */
+struct wm8958_enh_eq_cfg {
+	const char *name;
+	u16 regs[WM8958_ENH_EQ_REGS];
 };
 
 struct wm8994_pdata {
@@ -95,6 +135,15 @@ struct wm8994_pdata {
 	int num_mbc_cfgs;
 	struct wm8958_mbc_cfg *mbc_cfgs;
 
+	int num_vss_cfgs;
+	struct wm8958_vss_cfg *vss_cfgs;
+
+	int num_vss_hpf_cfgs;
+	struct wm8958_vss_hpf_cfg *vss_hpf_cfgs;
+
+	int num_enh_eq_cfgs;
+	struct wm8958_enh_eq_cfg *enh_eq_cfgs;
+
         /* LINEOUT can be differential or single ended */
         unsigned int lineout1_diff:1;
         unsigned int lineout2_diff:1;

include/sound/ak4641.h

@@ -0,0 +1,26 @@
+/*
+ * AK4641 ALSA SoC Codec driver
+ *
+ * Copyright 2009 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __AK4641_H
+#define __AK4641_H
+
+/**
+ * struct ak4641_platform_data - platform specific AK4641 configuration
+ * @gpio_power:	GPIO to control external power to AK4641
+ * @gpio_npdn:	GPIO connected to AK4641 nPDN pin
+ *
+ * Both GPIO parameters are optional.
+ */
+struct ak4641_platform_data {
+	int gpio_power;
+	int gpio_npdn;
+};
+
+#endif /* __AK4641_H */

include/sound/max98095.h

@@ -0,0 +1,54 @@
+/*
+ * Platform data for MAX98095
+ *
+ * Copyright 2011 Maxim Integrated Products
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __SOUND_MAX98095_PDATA_H__
+#define __SOUND_MAX98095_PDATA_H__
+
+/* Equalizer filter response configuration */
+struct max98095_eq_cfg {
+	const char *name;
+	unsigned int rate;
+	u16 band1[5];
+	u16 band2[5];
+	u16 band3[5];
+	u16 band4[5];
+	u16 band5[5];
+};
+
+/* Biquad filter response configuration */
+struct max98095_biquad_cfg {
+	const char *name;
+	unsigned int rate;
+	u16 band1[5];
+	u16 band2[5];
+};
+
+/* codec platform data */
+struct max98095_pdata {
+
+	/* Equalizers for DAI1 and DAI2 */
+	struct max98095_eq_cfg *eq_cfg;
+	unsigned int eq_cfgcnt;
+
+	/* Biquad filter for DAI1 and DAI2 */
+	struct max98095_biquad_cfg *bq_cfg;
+	unsigned int bq_cfgcnt;
+
+	/* Analog/digital microphone configuration:
+	 * 0 = analog microphone input (normal setting)
+	 * 1 = digital microphone input
+	 */
+	unsigned int digmic_left_mode:1;
+	unsigned int digmic_right_mode:1;
+};
+
+#endif