---

yaml
---
r: 243414
b: refs/heads/master
c: 58ac817
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e149860d16d96aef1a8eb7dc1d0b9d4313479e61
+refs/heads/master: 58ac8177cebb890ba980cdace36457e0fe1e62af

trunk/drivers/mmc/host/sdhci-esdhc-imx.c

@@ -19,13 +19,31 @@
 #include <linux/slab.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdhci-pltfm.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
 #include <mach/hardware.h>
 #include <mach/esdhc.h>
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
 
+/* VENDOR SPEC register */
+#define SDHCI_VENDOR_SPEC		0xC0
+#define  SDHCI_VENDOR_SPEC_SDIO_QUIRK	0x00000002
+
 #define ESDHC_FLAG_GPIO_FOR_CD_WP	(1 << 0)
+/*
+ * The CMDTYPE of the CMD register (offset 0xE) should be set to
+ * "11" when the STOP CMD12 is issued on imx53 to abort one
+ * open ended multi-blk IO. Otherwise the TC INT wouldn't
+ * be generated.
+ * In exact block transfer, the controller doesn't complete the
+ * operations automatically as required at the end of the
+ * transfer and remains on hold if the abort command is not sent.
+ * As a result, the TC flag is not asserted and SW  received timeout
+ * exeception. Bit1 of Vendor Spec registor is used to fix it.
+ */
+#define ESDHC_FLAG_MULTIBLK_NO_INT	(1 << 1)
 
 struct pltfm_imx_data {
 	int flags;
@@ -78,6 +96,15 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
 		 */
 		val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
 
+	if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
+				&& (reg == SDHCI_INT_STATUS)
+				&& (val & SDHCI_INT_DATA_END))) {
+			u32 v;
+			v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
+			v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK;
+			writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
+	}
+
 	writel(val, host->ioaddr + reg);
 }
 
@@ -100,9 +127,21 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 		 * Postpone this write, we must do it together with a
 		 * command write that is down below.
 		 */
+		if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)
+				&& (host->cmd->opcode == SD_IO_RW_EXTENDED)
+				&& (host->cmd->data->blocks > 1)
+				&& (host->cmd->data->flags & MMC_DATA_READ)) {
+			u32 v;
+			v = readl(host->ioaddr + SDHCI_VENDOR_SPEC);
+			v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK;
+			writel(v, host->ioaddr + SDHCI_VENDOR_SPEC);
+		}
 		imx_data->scratchpad = val;
 		return;
 	case SDHCI_COMMAND:
+		if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
+			&& (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
+			val |= SDHCI_CMD_ABORTCMD;
 		writel(val << 16 | imx_data->scratchpad,
 			host->ioaddr + SDHCI_TRANSFER_MODE);
 		return;
@@ -215,6 +254,9 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd
 		sdhci_esdhc_ops.get_ro = esdhc_pltfm_get_ro;
 	}
 
+	if (!(cpu_is_mx25() || cpu_is_mx35() || cpu_is_mx51()))
+		imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT;
+
 	if (boarddata) {
 		err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP");
 		if (err) {