OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files

In preparation for multi-OMAP2 kernels, split
mach-omap2/clock2xxx_data.c into mach-omap2/clock2420_data.c and
mach-omap2/clock2430_data.c.  2430 uses a different device space
physical memory layout than past or future OMAPs, and we use a
different virtual memory layout as well, which causes trouble for
architecture-level code/data that tries to support both.  We tried
using offsets from the virtual base last year, but those patches never
made it upstream; so after some discussion with Tony about the best
all-around approach, we'll just grit our teeth and duplicate the
structures.  The maintenance advantages of a single kernel config that
can compile and boot on OMAP2, 3, and 4 platforms are simply too
compelling.

This approach does have some nice benefits beyond multi-OMAP 2 kernel
support.  The runtime size of OMAP2420-specific and OMAP2430-specific
kernels is smaller, since unused clocks for the other OMAP2 chip will
no longer be compiled in.  (At some point we will mark the clock data
__initdata and allocate it during registration, which will eliminate
the runtime memory advantage.)  It also makes the clock trees slightly
easier to read, since 2420-specific and 2430-specific clocks are no
longer mixed together.

This patch also splits 2430-specific clock code into its own file,
mach-omap2/clock2430.c, which is only compiled in for 2430 builds -
mostly for organizational clarity.

While here, fix a bug in the OMAP2430 clock tree: "emul_ck" was
incorrectly marked as being 2420-only, when actually it is present on
both OMAP2420 and OMAP2430.

Thanks to Tony for some good discussions about how to approach this
problem.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>

arch/arm/mach-omap2/Makefile

@@ -57,10 +57,12 @@ obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o \
-					   clock2xxx_data.o clkt2xxx_sys.o \
+					   clkt2xxx_sys.o \
 					   clkt2xxx_dpllcore.o \
 					   clkt2xxx_virt_prcm_set.o \
 					   clkt2xxx_apll.o clkt2xxx_osc.o
+obj-$(CONFIG_ARCH_OMAP2420)		+= clock2420_data.o
+obj-$(CONFIG_ARCH_OMAP2430)		+= clock2430.o clock2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o \
 					   clock34xx.o clkt34xx_dpll3m2.o \
 					   clock3517.o clock36xx.o \

arch/arm/mach-omap2/clkt2xxx_apll.c

@@ -38,6 +38,8 @@
 #define APLLS_CLKIN_13MHZ		2
 #define APLLS_CLKIN_12MHZ		3
 
+void __iomem *cm_idlest_pll;
+
 /* Private functions */
 
 /* Enable an APLL if off */
@@ -56,7 +58,7 @@ static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
 	cval |= apll_mask;
 	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
 
-	omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), status_mask,
+	omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
 			     OMAP24XX_CM_IDLEST_VAL, clk->name);
 
 	/*