---

yaml
---
r: 272469
b: refs/heads/master
c: 3945fe9
h: refs/heads/master
i:
  272467: 88e7e61
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: f533c61e1921b93aa247d72d39c3fbe045340a9a
+refs/heads/master: 3945fe9314af718946f71185901c28dd349469c7

trunk/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt

@@ -0,0 +1,25 @@
+* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<chip>-i2c"
+- reg : Should contain I2C/HS-I2C registers location and length
+- interrupts : Should contain I2C/HS-I2C interrupt
+
+Optional properties:
+- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
+  The absence of the propoerty indicates the default frequency 100 kHz.
+
+Examples:
+
+i2c@83fc4000 { /* I2C2 on i.MX51 */
+	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	reg = <0x83fc4000 0x4000>;
+	interrupts = <63>;
+};
+
+i2c@70038000 { /* HS-I2C on i.MX51 */
+	compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+	reg = <0x70038000 0x4000>;
+	interrupts = <64>;
+	clock-frequency = <400000>;
+};

trunk/Documentation/devicetree/bindings/i2c/samsung-i2c.txt

@@ -0,0 +1,39 @@
+* Samsung's I2C controller
+
+The Samsung's I2C controller is used to interface with I2C devices.
+
+Required properties:
+  - compatible: value should be either of the following.
+      (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
+      (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
+  - reg: physical base address of the controller and length of memory mapped
+    region.
+  - interrupts: interrupt number to the cpu.
+  - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
+  - gpios: The order of the gpios should be the following: <SDA, SCL>.
+    The gpio specifier depends on the gpio controller.
+
+Optional properties:
+  - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
+    specified, default value is 0.
+  - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
+    specified, the default value in Hz is 100000.
+
+Example:
+
+	i2c@13870000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13870000 0x100>;
+		interrupts = <345>;
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <100000>;
+		gpios = <&gpd1 2 0 /* SDA */
+			 &gpd1 3 0 /* SCL */>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wm8994@1a {
+			compatible = "wlf,wm8994";
+			reg = <0x1a>;
+		};
+	};

trunk/arch/arm/plat-mxc/include/mach/i2c.h

@@ -11,14 +11,10 @@
 
 /**
  * struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @init:	Initialise gpio's and other board specific things
- * @exit:	Free everything initialised by @init
  * @bitrate:	Bus speed measured in Hz
  *
  **/
 struct imxi2c_platform_data {
-	int (*init)(struct device *dev);
-	void (*exit)(struct device *dev);
 	int bitrate;
 };
 

trunk/arch/arm/plat-omap/i2c.c

@@ -108,6 +108,22 @@ static inline int omap1_i2c_add_bus(int bus_id)
 	res[1].start = INT_I2C;
 	pdata = &i2c_pdata[bus_id - 1];
 
+	/* all OMAP1 have IP version 1 register set */
+	pdata->rev = OMAP_I2C_IP_VERSION_1;
+
+	/* all OMAP1 I2C are implemented like this */
+	pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
+		       OMAP_I2C_FLAG_SIMPLE_CLOCK |
+		       OMAP_I2C_FLAG_16BIT_DATA_REG |
+		       OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
+
+	/* how the cpu bus is wired up differs for 7xx only */
+
+	if (cpu_is_omap7xx())
+		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
+	else
+		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+
 	return platform_device_register(pdev);
 }
 
@@ -138,6 +154,7 @@ static inline int omap2_i2c_add_bus(int bus_id)
 	struct omap_device *od;
 	char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
 	struct omap_i2c_bus_platform_data *pdata;
+	struct omap_i2c_dev_attr *dev_attr;
 
 	omap2_i2c_mux_pins(bus_id);
 
@@ -151,6 +168,16 @@ static inline int omap2_i2c_add_bus(int bus_id)
 	}
 
 	pdata = &i2c_pdata[bus_id - 1];
+	/*
+	 * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
+	 * use, and functionality implementation flags, up to the OMAP I2C
+	 * driver via platform data
+	 */
+	pdata->rev = oh->class->rev;
+
+	dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
+	pdata->flags = dev_attr->flags;
+
 	/*
 	 * When waiting for completion of a i2c transfer, we need to
 	 * set a wake up latency constraint for the MPU. This is to

trunk/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h

@@ -394,19 +394,6 @@ typedef struct	psc_spi {
 #define PSC_SPITXRX_LC		(1 << 29)
 #define PSC_SPITXRX_SR		(1 << 28)
 
-/* PSC in SMBus (I2C) Mode. */
-typedef struct	psc_smb {
-	u32	psc_sel;
-	u32	psc_ctrl;
-	u32	psc_smbcfg;
-	u32	psc_smbmsk;
-	u32	psc_smbpcr;
-	u32	psc_smbstat;
-	u32	psc_smbevnt;
-	u32	psc_smbtxrx;
-	u32	psc_smbtmr;
-} psc_smb_t;
-
 /* SMBus Config Register. */
 #define PSC_SMBCFG_RT_MASK	(3 << 30)
 #define PSC_SMBCFG_RT_FIFO1	(0 << 30)

trunk/drivers/i2c/busses/Kconfig

@@ -350,15 +350,25 @@ config I2C_DAVINCI
 	  devices such as DaVinci NIC.
 	  For details please see http://www.ti.com/davinci
 
-config I2C_DESIGNWARE
-	tristate "Synopsys DesignWare"
+config I2C_DESIGNWARE_PLATFORM
+	tristate "Synopsys DesignWare Platfrom"
 	depends on HAVE_CLK
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
 
 	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-designware.
+	  will be called i2c-designware-platform.
+
+config I2C_DESIGNWARE_PCI
+	tristate "Synopsys DesignWare PCI"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the
+	  Synopsys DesignWare I2C adapter. Only master mode is supported.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-designware-pci.
 
 config I2C_GPIO
 	tristate "GPIO-based bitbanging I2C"

trunk/drivers/i2c/busses/Makefile

@@ -33,7 +33,10 @@ obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
 obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
-obj-$(CONFIG_I2C_DESIGNWARE)	+= i2c-designware.o
+obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
+i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+obj-$(CONFIG_I2C_DESIGNWARE_PCI)	+= i2c-designware-pci.o
+i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o