[PATCH] sis190: initialisation of MAC address.

Extract some mac addr code from SiS's driver.

Some magic may hide beyond the isa bridge. The Rx mac control
register is now set without condition.

Note: good or bad, this part of the code is quite close to sis900.c.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

drivers/net/sis190.c

@@ -232,6 +232,14 @@ enum sis190_eeprom_access_register_bits {
 	EEWOP	= 0x00000100	// unused
 };
 
+/* EEPROM Addresses */
+enum sis190_eeprom_address {
+	EEPROMSignature	= 0x00,
+	EEPROMCLK	= 0x01,	// unused
+	EEPROMInfo	= 0x02,
+	EEPROMMACAddr	= 0x03
+};
+
 struct sis190_private {
 	void __iomem *mmio_addr;
 	struct pci_dev *pci_dev;
@@ -1240,6 +1248,125 @@ static void sis190_tx_timeout(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
+static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev,
+						     struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u16 sig;
+	int i;
+
+	net_probe(tp, KERN_INFO "%s: Read MAC address from EEPROM\n",
+		  pci_name(pdev));
+
+	/* Check to see if there is a sane EEPROM */
+	sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature);
+
+	if ((sig == 0xffff) || (sig == 0x0000)) {
+		net_probe(tp, KERN_INFO "%s: Error EEPROM read %x.\n",
+			  pci_name(pdev), sig);
+		return -EIO;
+	}
+
+	/* Get MAC address from EEPROM */
+	for (i = 0; i < MAC_ADDR_LEN / 2; i++) {
+		u16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i);
+
+		((u16 *)dev->dev_addr)[0] = le16_to_cpu(w);
+	}
+
+	return 0;
+}
+
+/**
+ *	sis190_get_mac_addr_from_apc - Get MAC address for SiS965 model
+ *	@pdev: PCI device
+ *	@dev:  network device to get address for
+ *
+ *	SiS965 model, use APC CMOS RAM to store MAC address.
+ *	APC CMOS RAM is accessed through ISA bridge.
+ *	MAC address is read into @net_dev->dev_addr.
+ */
+static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev,
+						  struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	struct pci_dev *isa_bridge;
+	u8 reg, tmp8;
+	int i;
+
+	net_probe(tp, KERN_INFO "%s: Read MAC address from APC.\n",
+		  pci_name(pdev));
+
+	isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0965, NULL);
+	if (!isa_bridge) {
+		net_probe(tp, KERN_INFO "%s: Can not find ISA bridge.\n",
+			  pci_name(pdev));
+		return -EIO;
+	}
+
+	/* Enable port 78h & 79h to access APC Registers. */
+	pci_read_config_byte(isa_bridge, 0x48, &tmp8);
+	reg = (tmp8 & ~0x02);
+	pci_write_config_byte(isa_bridge, 0x48, reg);
+	udelay(50);
+	pci_read_config_byte(isa_bridge, 0x48, &reg);
+
+        for (i = 0; i < MAC_ADDR_LEN; i++) {
+                outb(0x9 + i, 0x78);
+                dev->dev_addr[i] = inb(0x79);
+        }
+
+	outb(0x12, 0x78);
+	reg = inb(0x79);
+
+	/* Restore the value to ISA Bridge */
+	pci_write_config_byte(isa_bridge, 0x48, tmp8);
+	pci_dev_put(isa_bridge);
+
+	return 0;
+}
+
+/**
+ *      sis190_init_rxfilter - Initialize the Rx filter
+ *      @dev: network device to initialize
+ *
+ *      Set receive filter address to our MAC address
+ *      and enable packet filtering.
+ */
+static inline void sis190_init_rxfilter(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u16 ctl;
+	int i;
+
+	ctl = SIS_R16(RxMacControl);
+	/*
+	 * Disable packet filtering before setting filter.
+	 * Note: SiS's driver writes 32 bits but RxMacControl is 16 bits
+	 * only and followed by RxMacAddr (6 bytes). Strange. -- FR
+	 */
+	SIS_W16(RxMacControl, ctl & ~0x0f00);
+
+	for (i = 0; i < MAC_ADDR_LEN; i++)
+		SIS_W8(RxMacAddr + i, dev->dev_addr[i]);
+
+	SIS_W16(RxMacControl, ctl);
+	SIS_PCI_COMMIT();
+}
+
+static int sis190_get_mac_addr(struct pci_dev *pdev, struct net_device *dev)
+{
+	u8 from;
+
+	pci_read_config_byte(pdev, 0x73, &from);
+
+	return (from & 0x00000001) ?
+		sis190_get_mac_addr_from_apc(pdev, dev) :
+		sis190_get_mac_addr_from_eeprom(pdev, dev);
+}
+
 static void sis190_set_speed_auto(struct net_device *dev)
 {
 	struct sis190_private *tp = netdev_priv(dev);
@@ -1355,7 +1482,7 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
 	struct sis190_private *tp;
 	struct net_device *dev;
 	void __iomem *ioaddr;
-	int i, rc;
+	int rc;
 
 	if (!printed_version) {
 		net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n");
@@ -1371,18 +1498,11 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
 	tp = netdev_priv(dev);
 	ioaddr = tp->mmio_addr;
 
-	/* Get MAC address */
-	/* Read node address from the EEPROM */
-
-	if (SIS_R32(ROMControl) & 0x4) {
-		for (i = 0; i < 3; i++) {
-			SIS_W16(RxMacAddr + 2*i,
-				sis190_read_eeprom(ioaddr, 3 + i));
-		}
-	}
+	rc = sis190_get_mac_addr(pdev, dev);
+	if (rc < 0)
+		goto err_release_board;
 
-	for (i = 0; i < MAC_ADDR_LEN; i++)
-		dev->dev_addr[i] = SIS_R8(RxMacAddr + i);
+	sis190_init_rxfilter(dev);
 
 	INIT_WORK(&tp->phy_task, sis190_phy_task, dev);
 
@@ -1403,10 +1523,8 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
 
 	spin_lock_init(&tp->lock);
 	rc = register_netdev(dev);
-	if (rc < 0) {
-		sis190_release_board(pdev);
-		goto out;
-	}
+	if (rc < 0)
+		goto err_release_board;
 
 	pci_set_drvdata(pdev, dev);
 
@@ -1423,6 +1541,10 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
 	sis190_set_speed_auto(dev);
 out:
 	return rc;
+
+err_release_board:
+	sis190_release_board(pdev);
+	goto out;
 }
 
 static void __devexit sis190_remove_one(struct pci_dev *pdev)