---

yaml --- r: 120563 b: refs/heads/master c: cc49108 h: refs/heads/master i: 120561: 31d1b4c 120559: e473803 v: v3
git-mirror · Dec 25, 2008 · 83d9272 · 83d9272
1 parent d437cb5
commit 83d9272
Show file tree

Hide file tree

Showing 907 changed files with 31,338 additions and 14,012 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: de04b102bfc9a13e96f0892305b394077ffb6514
+refs/heads/master: cc4910850f93a8bb1cbafad038fd40f6da68c783
diff --git a/trunk/Documentation/DMA-API.txt b/trunk/Documentation/DMA-API.txt
@@ -316,12 +316,10 @@ reduce current DMA mapping usage or delay and try again later).
 	pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
 		int nents, int direction)
 
-Maps a scatter gather list from the block layer.
-
 Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
 
 Please note that the sg cannot be mapped again if it has been mapped once.
 The mapping process is allowed to destroy information in the sg.

diff --git a/trunk/Documentation/arm/mem_alignment b/trunk/Documentation/arm/mem_alignment
@@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user
 space, and might cause programs to fail unexpectedly.
 
 To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment.  The number is made up from various bits:
+/proc/cpu/alignment.  The number is made up from various bits:
 
 bit		behavior when set
 ---		-----------------

diff --git a/trunk/Documentation/cpu-freq/user-guide.txt b/trunk/Documentation/cpu-freq/user-guide.txt
@@ -23,6 +23,7 @@ Contents:
 1.3 sparc64
 1.4 ppc
 1.5 SuperH
+1.6 Blackfin
 
 2. "Policy" / "Governor"?
 2.1 Policy
@@ -97,6 +98,17 @@ The following SuperH processors are supported by cpufreq:
 SH-3
 SH-4
 
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
 
 2. "Policy" / "Governor" ?
 ==========================

diff --git a/trunk/Documentation/filesystems/ocfs2.txt b/trunk/Documentation/filesystems/ocfs2.txt
@@ -28,10 +28,7 @@ Manish Singh  <manish.singh@oracle.com>
 Caveats
 =======
 Features which OCFS2 does not support yet:
-	- extended attributes
 	- quotas
-	- cluster aware flock
-	- cluster aware lockf
 	- Directory change notification (F_NOTIFY)
 	- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
 	- POSIX ACLs

diff --git a/trunk/Documentation/filesystems/proc.txt b/trunk/Documentation/filesystems/proc.txt
@@ -44,6 +44,7 @@ Table of Contents
   2.14	/proc/<pid>/io - Display the IO accounting fields
   2.15	/proc/<pid>/coredump_filter - Core dump filtering settings
   2.16	/proc/<pid>/mountinfo - Information about mounts
+  2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
 
 ------------------------------------------------------------------------------
 Preface
@@ -2483,4 +2484,30 @@ For more information on mount propagation see:
 
   Documentation/filesystems/sharedsubtree.txt
 
+2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for  max_user_watches  is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
 ------------------------------------------------------------------------------
+
diff --git a/trunk/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/trunk/Documentation/filesystems/ramfs-rootfs-initramfs.txt
@@ -130,12 +130,12 @@ The 2.6 kernel build process always creates a gzipped cpio format initramfs
 archive and links it into the resulting kernel binary.  By default, this
 archive is empty (consuming 134 bytes on x86).
 
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary.  This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary.  This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
 
   dir /dev 755 0 0
   nod /dev/console 644 0 0 c 5 1

diff --git a/trunk/Documentation/input/input-programming.txt b/trunk/Documentation/input/input-programming.txt
@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
 {
 	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
+	return IRQ_HANDLED;
 }
 
 static int __init button_init(void)

diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
@@ -220,14 +220,17 @@ and is between 256 and 4096 characters. It is defined in the file
 			Bits in debug_level correspond to a level in
 			ACPI_DEBUG_PRINT statements, e.g.,
 			    ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
-			See Documentation/acpi/debug.txt for more information
-			about debug layers and levels.
+			The debug_level mask defaults to "info".  See
+			Documentation/acpi/debug.txt for more information about
+			debug layers and levels.
 
+			Enable processor driver info messages:
+			    acpi.debug_layer=0x20000000
+			Enable PCI/PCI interrupt routing info messages:
+			    acpi.debug_layer=0x400000
 			Enable AML "Debug" output, i.e., stores to the Debug
 			object while interpreting AML:
 			    acpi.debug_layer=0xffffffff acpi.debug_level=0x2
-			Enable PCI/PCI interrupt routing info messages:
-			    acpi.debug_layer=0x400000 acpi.debug_level=0x4
 			Enable all messages related to ACPI hardware:
 			    acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
 

diff --git a/trunk/Documentation/local_ops.txt b/trunk/Documentation/local_ops.txt
@@ -149,7 +149,7 @@ static void do_test_timer(unsigned long data)
 	int cpu;
 
 	/* Increment the counters */
-	on_each_cpu(test_each, NULL, 0, 1);
+	on_each_cpu(test_each, NULL, 1);
 	/* Read all the counters */
 	printk("Counters read from CPU %d\n", smp_processor_id());
 	for_each_online_cpu(cpu) {