---

yaml
---
r: 72074
b: refs/heads/master
c: 3cfa8f6
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 9dda78b711ca4d507251a7e896b2f41ec019fc58
+refs/heads/master: 3cfa8f6c542467bd046aedb9d2e394b3d0e8467f

trunk/arch/blackfin/Kconfig

@@ -71,7 +71,7 @@ config GENERIC_CALIBRATE_DELAY
 
 config IRQCHIP_DEMUX_GPIO
 	bool
-	depends on (BF53x || BF561 || BF54x)
+	depends on (BF52x || BF53x || BF561 || BF54x)
 	default y
 
 source "init/Kconfig"
@@ -85,6 +85,21 @@ choice
 	prompt "CPU"
 	default BF533
 
+config BF522
+	bool "BF522"
+	help
+	  BF522 Processor Support.
+
+config BF525
+	bool "BF525"
+	help
+	  BF525 Processor Support.
+
+config BF527
+	bool "BF527"
+	help
+	  BF527 Processor Support.
+
 config BF531
 	bool "BF531"
 	help
@@ -144,13 +159,18 @@ endchoice
 
 choice
 	prompt "Silicon Rev"
+	default BF_REV_0_1 if BF527
 	default BF_REV_0_2 if BF537
 	default BF_REV_0_3 if BF533
 	default BF_REV_0_0 if BF549
 
 config BF_REV_0_0
 	bool "0.0"
-	depends on (BF549)
+	depends on (BF549 || BF527)
+
+config BF_REV_0_1
+	bool "0.2"
+	depends on (BF549 || BF527)
 
 config BF_REV_0_2
 	bool "0.2"
@@ -176,6 +196,11 @@ config BF_REV_NONE
 
 endchoice
 
+config BF52x
+	bool
+	depends on (BF522 || BF525 || BF527)
+	default y
+
 config BF53x
 	bool
 	depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
@@ -204,6 +229,12 @@ choice
 	  configuration to ensure that all the other settings are
 	  correct.
 
+config BFIN527_EZKIT
+	bool "BF527-EZKIT"
+	depends on (BF522 || BF525 || BF527)
+	help
+	  BF533-EZKIT-LITE board Support.
+
 config BFIN533_EZKIT
 	bool "BF533-EZKIT"
 	depends on (BF533 || BF532 || BF531)
@@ -299,11 +330,17 @@ config MEM_MT48LC8M32B2B5_7
 	depends on (BFIN561_BLUETECHNIX_CM)
 	default y
 
+config MEM_MT48LC32M16A2TG_75
+	bool
+	depends on (BFIN527_EZKIT)
+	default y
+
 config BFIN_SHARED_FLASH_ENET
 	bool
 	depends on (BFIN533_STAMP)
 	default y
 
+source "arch/blackfin/mach-bf527/Kconfig"
 source "arch/blackfin/mach-bf533/Kconfig"
 source "arch/blackfin/mach-bf561/Kconfig"
 source "arch/blackfin/mach-bf537/Kconfig"
@@ -329,7 +366,7 @@ config CLKIN_HZ
 	int "Crystal Frequency in Hz"
 	default "11059200" if BFIN533_STAMP
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if BFIN537_STAMP
+	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT)
 	default "30000000" if BFIN561_EZKIT
 	default "24576000" if PNAV10
 	help
@@ -362,7 +399,7 @@ config VCO_MULT
 	range 1 64
 	default "22" if BFIN533_EZKIT
 	default "45" if BFIN533_STAMP
-	default "20" if BFIN537_STAMP
+	default "20" if (BFIN537_STAMP || BFIN527_EZKIT)
 	default "22" if BFIN533_BLUETECHNIX_CM
 	default "20" if BFIN537_BLUETECHNIX_CM
 	default "20" if BFIN561_BLUETECHNIX_CM
@@ -398,7 +435,7 @@ config SCLK_DIV
 	range 1 15
 	default 5 if BFIN533_EZKIT
 	default 5 if BFIN533_STAMP
-	default 4 if BFIN537_STAMP
+	default 4 if (BFIN537_STAMP || BFIN527_EZKIT)
 	default 5 if BFIN533_BLUETECHNIX_CM
 	default 4 if BFIN537_BLUETECHNIX_CM
 	default 4 if BFIN561_BLUETECHNIX_CM
@@ -450,6 +487,7 @@ comment "Memory Setup"
 config MEM_SIZE
 	int "SDRAM Memory Size in MBytes"
 	default  32 if BFIN533_EZKIT
+	default  64 if BFIN527_EZKIT
 	default  64 if BFIN537_STAMP
 	default  64 if BFIN561_EZKIT
 	default 128 if BFIN533_STAMP
@@ -459,6 +497,7 @@ config MEM_ADD_WIDTH
 	int "SDRAM Memory Address Width"
 	default  9 if BFIN533_EZKIT
 	default  9 if BFIN561_EZKIT
+	default 10 if BFIN527_EZKIT
 	default 10 if BFIN537_STAMP
 	default 11 if BFIN533_STAMP
 	default 10 if PNAV10
@@ -749,9 +788,19 @@ config LARGE_ALLOCS
 	  a lot of RAM, and you need to able to allocate very large
 	  contiguous chunks. If unsure, say N.
 
+config BFIN_GPTIMERS
+	tristate "Enable Blackfin General Purpose Timers API"
+	default n
+	help
+	  Enable support for the General Purpose Timers API.  If you
+	  are unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called gptimers.ko.
+
 config BFIN_DMA_5XX
 	bool "Enable DMA Support"
-	depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561 || BF54x)
+	depends on (BF52x || BF53x || BF561 || BF54x)
 	default y
 	help
 	  DMA driver for BF5xx.

trunk/arch/blackfin/Makefile

@@ -12,12 +12,17 @@ LDFLAGS_vmlinux  := -X
 OBJCOPYFLAGS     := -O binary -R .note -R .comment -S
 GZFLAGS          := -9
 
+CFLAGS           += $(call cc-option,-mno-fdpic)
+AFLAGS           += $(call cc-option,-mno-fdpic)
 CFLAGS_MODULE    += -mlong-calls
 KALLSYMS         += --symbol-prefix=_
 
 KBUILD_DEFCONFIG := BF537-STAMP_defconfig
 
 # setup the machine name and the machine dependent settings
+machine-$(CONFIG_BF522) := bf527
+machine-$(CONFIG_BF525) := bf527
+machine-$(CONFIG_BF527) := bf527
 machine-$(CONFIG_BF531) := bf533
 machine-$(CONFIG_BF532) := bf533
 machine-$(CONFIG_BF533) := bf533
@@ -32,6 +37,9 @@ machine-$(CONFIG_BF561) := bf561
 MACHINE := $(machine-y)
 export MACHINE
 
+cpu-$(CONFIG_BF522) := bf522
+cpu-$(CONFIG_BF525) := bf525
+cpu-$(CONFIG_BF527) := bf527
 cpu-$(CONFIG_BF531) := bf531
 cpu-$(CONFIG_BF532) := bf532
 cpu-$(CONFIG_BF533) := bf533
@@ -97,12 +105,23 @@ archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
 
-all: vmImage
 boot := arch/$(ARCH)/boot
 BOOT_TARGETS = vmImage
-.PHONY: $(BOOT_TARGETS)
+PHONY += $(BOOT_TARGETS) install
+KBUILD_IMAGE := $(boot)/vmImage
+
+all: vmImage
+
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+install:
+	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
+
 define archhelp
   echo  '* vmImage         - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage)'
+  echo  '  install         - Install kernel using'
+  echo  '                     (your) ~/bin/$(CROSS_COMPILE)installkernel or'
+  echo  '                     (distribution) PATH: $(CROSS_COMPILE)installkernel or'
+  echo  '                     install to $$(INSTALL_PATH)'
 endef

trunk/arch/blackfin/boot/Makefile

@@ -26,3 +26,6 @@ $(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
 $(obj)/vmImage: $(obj)/vmlinux.gz
 	$(call if_changed,uimage)
 	@echo 'Kernel: $@ is ready'
+
+install:
+	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"

trunk/arch/blackfin/boot/install.sh

@@ -0,0 +1,57 @@
+#!/bin/sh
+#
+# arch/blackfin/boot/install.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Mike Frysinger
+#
+# "make install" script for Blackfin architecture
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+#
+
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+ 	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
+# User may have a custom install script
+
+if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
+if which ${CROSS_COMPILE}installkernel >/dev/null 2>&1; then
+	exec ${CROSS_COMPILE}installkernel "$@"
+fi
+
+# Default install - same as make zlilo
+
+back_it_up() {
+	local file=$1
+	[ -f ${file} ] || return 0
+	local stamp=$(stat -c %Y ${file} 2>/dev/null)
+	mv ${file} ${file}.${stamp:-old}
+}
+
+back_it_up $4/uImage
+back_it_up $4/System.map
+
+cat $2 > $4/uImage
+cp $3 $4/System.map