Merge tag 'omap-cleanup-a-for-3.8' of git://git.kernel.org/pub/scm/li…

…nux/kernel/git/pjw/omap-pending into omap-for-v3.8/cleanup-prcm

The first set of OMAP PRM/CM-related cleanup patches for 3.8.
Prepares for the future move of the PRM/CM code to drivers/.  Also
includes some prcm.[ch] cleanup patches from the WDTIMER cleanup
series that don't need external acks.

Basic test logs for this branch on top of v3.7-rc2 are here:

http://www.pwsan.com/omap/testlogs/prcm_cleanup_a_3.8/20121021123719/

But due to the number of unrelated regressions present in v3.7-rc[12],
it's not particularly usable as a testing base.  With reverts, fixes,
and workarounds applied as documented in:

http://www.pwsan.com/omap/testlogs/test_v3.7-rc2/20121020134755/README.txt

the following test logs were obtained:

http://www.pwsan.com/omap/testlogs/prcm_cleanup_a_3.8/20121020231757/

which indicate that the series tests cleanly.

Conflicts:
	arch/arm/mach-omap2/Makefile
	arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
	arch/arm/mach-omap2/pm24xx.c

arch/arm/mach-omap1/common.h

@@ -94,4 +94,6 @@ extern int ocpi_enable(void);
 static inline int ocpi_enable(void) { return 0; }
 #endif
 
+extern int omap1_get_reset_sources(void);
+
 #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */

arch/arm/mach-omap1/reset.c

@@ -10,6 +10,19 @@
 
 #include "common.h"
 
+/* ARM_SYSST bit shifts related to SoC reset sources */
+#define ARM_SYSST_POR_SHIFT				5
+#define ARM_SYSST_EXT_RST_SHIFT				4
+#define ARM_SYSST_ARM_WDRST_SHIFT			2
+#define ARM_SYSST_GLOB_SWRST_SHIFT			1
+
+/* Standardized reset source bits (across all OMAP SoCs) */
+#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT		0
+#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT		1
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT			3
+#define OMAP_EXTWARM_RST_SRC_ID_SHIFT			5
+
+
 void omap1_restart(char mode, const char *cmd)
 {
 	/*
@@ -23,3 +36,28 @@ void omap1_restart(char mode, const char *cmd)
 
 	omap_writew(1, ARM_RSTCT1);
 }
+
+/**
+ * omap1_get_reset_sources - return the source of the SoC's last reset
+ *
+ * Returns bits that represent the last reset source for the SoC.  The
+ * format is standardized across OMAPs for use by the OMAP watchdog.
+ */
+int omap1_get_reset_sources(void)
+{
+	int ret = 0;
+	u16 rs;
+
+	rs = __raw_readw(ARM_SYSST);
+
+	if (rs & (1 << ARM_SYSST_POR_SHIFT))
+		ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT;
+	if (rs & (1 << ARM_SYSST_EXT_RST_SHIFT))
+		ret |= 1 << OMAP_EXTWARM_RST_SRC_ID_SHIFT;
+	if (rs & (1 << ARM_SYSST_ARM_WDRST_SHIFT))
+		ret |= 1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT;
+	if (rs & (1 << ARM_SYSST_GLOB_SWRST_SHIFT))
+		ret |= 1 << OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT;
+
+	return ret;
+}

arch/arm/mach-omap2/Makefile

@@ -7,28 +7,34 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
 	 omap_device.o
 
-# INTCPS IP block support - XXX should be moved to drivers/
-obj-$(CONFIG_ARCH_OMAP2)		+= irq.o
-obj-$(CONFIG_ARCH_OMAP3)		+= irq.o
-obj-$(CONFIG_SOC_AM33XX)		+= irq.o
-
-# Secure monitor API support
-obj-$(CONFIG_ARCH_OMAP3)		+= omap-smc.o omap-secure.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap-smc.o omap-secure.o
-obj-$(CONFIG_SOC_OMAP5)			+= omap-smc.o omap-secure.o
+omap-2-3-common				= irq.o
+hwmod-common				= omap_hwmod.o \
+					  omap_hwmod_common_data.o
+clock-common				= clock.o clock_common_data.o \
+					  clkt_dpll.o clkt_clksel.o
+secure-common				= omap-smc.o omap-secure.o
+
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
+obj-$(CONFIG_SOC_OMAP5)	 += prm44xx.o $(hwmod-common) $(secure-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o
 endif
 
-obj-$(CONFIG_TWL4030_CORE)		+= omap_twl.o
+obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 # SMP support ONLY available for OMAP4
 
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap4-common.o omap-wakeupgen.o
-obj-$(CONFIG_SOC_OMAP5)			+= omap4-common.o omap-wakeupgen.o
+omap-4-5-common				=  omap4-common.o omap-wakeupgen.o \
+					   sleep44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-common)
+obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-common)
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
@@ -53,7 +59,6 @@ obj-$(CONFIG_ARCH_OMAP4)		+= mux44xx.o
 # SMS/SDRC
 obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o
-obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 # OPP table initialization
 ifeq ($(CONFIG_PM_OPP),y)
@@ -64,15 +69,15 @@ endif
 
 # Power Management
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
-obj-$(CONFIG_ARCH_OMAP4)		+= sleep44xx.o
-obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o sleep44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 
 obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
-obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)	+= smartreflex-class3.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)    += smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
@@ -84,84 +89,89 @@ endif
 endif
 
 ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_OMAP3)		+= cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= cpuidle44xx.o
+obj-$(CONFIG_ARCH_OMAP3)                += cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4)                += cpuidle44xx.o
 endif
 
 # PRCM
-obj-y					+= prcm.o prm_common.o
-obj-$(CONFIG_ARCH_OMAP2)		+= cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-y					+= prcm.o prm_common.o cm_common.o
+obj-$(CONFIG_ARCH_OMAP2)		+= prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
 obj-$(CONFIG_SOC_AM33XX)		+= prm33xx.o cm33xx.o
 omap-prcm-4-5-common			=  cminst44xx.o cm44xx.o prm44xx.o \
 					   prcm_mpu44xx.o prminst44xx.o \
-					   vc44xx_data.o vp44xx_data.o \
-					   prm44xx.o
+					   vc44xx_data.o vp44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-prcm-4-5-common)
 
 # OMAP voltage domains
-obj-y					+= voltage.o vc.o vp.o
+voltagedomain-common			:= voltage.o vc.o vp.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP2)		+= voltagedomains2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP3)		+= voltagedomains3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= voltagedomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(voltagedomain-common)
+obj-$(CONFIG_SOC_AM33XX)                += voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(voltagedomain-common)
 
 # OMAP powerdomain framework
-obj-y					+= powerdomain.o powerdomain-common.o
+powerdomain-common			+= powerdomain.o powerdomain-common.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(powerdomain-common)
 obj-$(CONFIG_ARCH_OMAP2)		+= powerdomains2xxx_data.o
-obj-$(CONFIG_ARCH_OMAP2)		+= powerdomain2xxx_3xxx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= powerdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(powerdomain-common)
 obj-$(CONFIG_ARCH_OMAP3)		+= powerdomains3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= powerdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= powerdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= powerdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(powerdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5)			+= powerdomain44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(powerdomain-common)
 
 # PRCM clockdomain control
-obj-y					+= clockdomain.o
-obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain2xxx_3xxx.o
+clockdomain-common			+= clockdomain.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(clockdomain-common)
 obj-$(CONFIG_ARCH_OMAP2)		+= clockdomains2xxx_3xxx_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= clockdomains2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= clockdomains2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(clockdomain-common)
 obj-$(CONFIG_ARCH_OMAP3)		+= clockdomains2xxx_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clockdomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clockdomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX)		+= clockdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5)			+= clockdomain44xx.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(clockdomain-common)
 
 # Clock framework
-obj-y					+= clock.o clock_common_data.o \
-					   clkt_dpll.o clkt_clksel.o
-obj-$(CONFIG_ARCH_OMAP2)		+= clock2xxx.o
-obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpllcore.o clkt2xxx_sys.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_sys.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpllcore.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_virt_prcm_set.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_apll.o clkt2xxx_osc.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpll.o clkt_iclk.o
 obj-$(CONFIG_SOC_OMAP2420)		+= clock2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o clock2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o clock3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= clock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM33XX)		+= dpll3xxx.o clock33xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX)		+= clock33xx_data.o
+obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
 obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 
 # OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
 obj-$(CONFIG_SOC_OMAP2430)		+= opp2430_data.o
 
 # hwmod data
-obj-y					+= omap_hwmod_common_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_ipblock_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
 obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_interconnect_data.o
@@ -207,10 +217,10 @@ obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
-obj-$(CONFIG_MACH_DEVKIT8000)		+= board-devkit8000.o
+obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM)	+= board-omap3logic.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO)	+= board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
 obj-$(CONFIG_MACH_ENCORE)		+= board-omap3encore.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
 obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o

arch/arm/mach-omap2/clkt2xxx_apll.c

@@ -25,7 +25,7 @@
 
 #include "clock.h"
 #include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "cm-regbits-24xx.h"
 
 /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */

arch/arm/mach-omap2/clkt2xxx_dpll.c

@@ -15,7 +15,7 @@
 #include <linux/io.h>
 
 #include "clock.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "cm-regbits-24xx.h"
 
 /* Private functions */

arch/arm/mach-omap2/clock.c

@@ -33,7 +33,8 @@
 #include "soc.h"
 #include "clockdomain.h"
 #include "clock.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
+#include "cm3xxx.h"
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 

arch/arm/mach-omap2/clock2420_data.c

@@ -23,7 +23,7 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"

arch/arm/mach-omap2/clock2430.c

@@ -25,7 +25,7 @@
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "cm-regbits-24xx.h"
 
 /**

arch/arm/mach-omap2/clock2430_data.c

@@ -22,7 +22,7 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"

arch/arm/mach-omap2/clock34xx.c

@@ -23,7 +23,7 @@
 
 #include "clock.h"
 #include "clock34xx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
 /**

arch/arm/mach-omap2/clock3517.c

@@ -23,7 +23,7 @@
 
 #include "clock.h"
 #include "clock3517.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
 /*

arch/arm/mach-omap2/clock3xxx_data.c

@@ -28,7 +28,7 @@
 #include "clock34xx.h"
 #include "clock36xx.h"
 #include "clock3517.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-34xx.h"