---

yaml
---
r: 180531
b: refs/heads/master
c: fed08d0
h: refs/heads/master
i:
  180529: d95bd4a
  180527: 1f16342
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 280c96b16a732cec207ccef7f70cb9ec727d3fd9
+refs/heads/master: fed08d036f2aabd8d0c684439de37f8ebec2bbc2

trunk/Documentation/ABI/testing/ima_policy

@@ -20,7 +20,7 @@ Description:
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 
-		base: 	func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
+		base: 	func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
 			uid:= decimal value
@@ -40,11 +40,11 @@ Description:
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
-			measure func=FILE_CHECK mask=MAY_READ uid=0
+			measure func=INODE_PERM mask=MAY_READ uid=0
 
 		The default policy measures all executables in bprm_check,
 		all files mmapped executable in file_mmap, and all files
-		open for read by root in do_filp_open.
+		open for read by root in inode_permission.
 
 		Examples of LSM specific definitions:
 
@@ -54,8 +54,8 @@ Description:
 
 			dont_measure obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t
-			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
-			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
+			measure subj_user=system_u func=INODE_PERM mask=MAY_READ
+			measure subj_role=system_r func=INODE_PERM mask=MAY_READ
 
 		Smack:
-			measure subj_user=_ func=FILE_CHECK mask=MAY_READ
+			measure subj_user=_ func=INODE_PERM mask=MAY_READ

trunk/Documentation/cpu-freq/governors.txt

@@ -145,8 +145,8 @@ show_sampling_rate_max: THIS INTERFACE IS DEPRECATED, DON'T USE IT.
 up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on
 whether it should increase the frequency.  For example when it is set
-to its default value of '95' it means that between the checking
-intervals the CPU needs to be on average more than 95% in use to then
+to its default value of '80' it means that between the checking
+intervals the CPU needs to be on average more than 80% in use to then
 decide that the CPU frequency needs to be increased.  
 
 ignore_nice_load: this parameter takes a value of '0' or '1'. When

trunk/Documentation/fault-injection/fault-injection.txt

@@ -143,8 +143,8 @@ o provide a way to configure fault attributes
   failslab, fail_page_alloc, and fail_make_request use this way.
   Helper functions:
 
-	init_fault_attr_dentries(entries, attr, name);
-	void cleanup_fault_attr_dentries(entries);
+	init_fault_attr_entries(entries, attr, name);
+	void cleanup_fault_attr_entries(entries);
 
 - module parameters
 

trunk/Documentation/feature-removal-schedule.txt

@@ -493,52 +493,3 @@ Why:	These two features use non-standard interfaces. There are the
 Who:	Corentin Chary <corentin.chary@gmail.com>
 
 ----------------------------
-
-What:	usbvideo quickcam_messenger driver
-When:	2.6.35
-Files:	drivers/media/video/usbvideo/quickcam_messenger.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_stv06xx
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	ov511 v4l1 driver
-When:	2.6.35
-Files:	drivers/media/video/ov511.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_ov519
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	w9968cf v4l1 driver
-When:	2.6.35
-Files:	drivers/media/video/w9968cf*.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_ov519
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	ovcamchip sensor framework
-When:	2.6.35
-Files:	drivers/media/video/ovcamchip/*
-Why:	Only used by obsoleted v4l1 drivers
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	stv680 v4l1 driver
-When:	2.6.35
-Files:	drivers/media/video/stv680.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_stv0680
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	zc0301 v4l driver
-When:	2.6.35
-Files:	drivers/media/video/zc0301/*
-Why:	Duplicate functionality with the gspca_zc3xx driver, zc0301 only
-	supports 2 USB-ID's (because it only supports a limited set of
-	sensors) wich are also supported by the gspca_zc3xx driver
-	(which supports 53 USB-ID's in total)
-Who:	Hans de Goede <hdegoede@redhat.com>

trunk/Documentation/input/multi-touch-protocol.txt

@@ -27,30 +27,12 @@ set of events/packets.
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
-minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
-allows for multiple fingers to be tracked.  If the device supports it, the
-ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the contact area and approaching finger, respectively.
-
-The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
-looking through a window at someone gently holding a finger against the
-glass.  You will see two regions, one inner region consisting of the part
-of the finger actually touching the glass, and one outer region formed by
-the perimeter of the finger. The diameter of the inner region is the
-ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
-ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
-against the glass. The inner region will increase, and in general, the
-ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
-unity, is related to the finger pressure. For pressure-based devices,
-ABS_MT_PRESSURE may be used to provide the pressure on the contact area
-instead.
-
-In addition to the MAJOR parameters, the oval shape of the finger can be
-described by adding the MINOR parameters, such that MAJOR and MINOR are the
-major and minor axis of an ellipse. Finally, the orientation of the oval
-shape can be describe with the ORIENTATION parameter.
-
-The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
+ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
+device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the approaching finger. Anisotropy and direction may be specified with
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION.  The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
 finger or a pen or something else.  Devices with more granular information
 may specify general shapes as blobs, i.e., as a sequence of rectangular
 shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
@@ -60,9 +42,11 @@ report finger tracking from hardware [5].
 Here is what a minimal event sequence for a two-finger touch would look
 like:
 
+   ABS_MT_TOUCH_MAJOR
    ABS_MT_POSITION_X
    ABS_MT_POSITION_Y
    SYN_MT_REPORT
+   ABS_MT_TOUCH_MAJOR
    ABS_MT_POSITION_X
    ABS_MT_POSITION_Y
    SYN_MT_REPORT
@@ -103,12 +87,6 @@ the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
 the notion of pressure. The fingers of the hand and the palm all have
 different characteristic widths [1].
 
-ABS_MT_PRESSURE
-
-The pressure, in arbitrary units, on the contact area. May be used instead
-of TOUCH and WIDTH for pressure-based devices or any device with a spatial
-signal intensity distribution.
-
 ABS_MT_ORIENTATION
 
 The orientation of the ellipse. The value should describe a signed quarter
@@ -192,16 +170,6 @@ There are a few devices that support trackingID in hardware. User space can
 make use of these native identifiers to reduce bandwidth and cpu usage.
 
 
-Gestures
---------
-
-In the specific application of creating gesture events, the TOUCH and WIDTH
-parameters can be used to, e.g., approximate finger pressure or distinguish
-between index finger and thumb. With the addition of the MINOR parameters,
-one can also distinguish between a sweeping finger and a pointing finger,
-and with ORIENTATION, one can detect twisting of fingers.
-
-
 Notes
 -----
 

trunk/Documentation/trace/ftrace-design.txt

@@ -1,6 +1,5 @@
 		function tracer guts
 		====================
-		By Mike Frysinger
 
 Introduction
 ------------
@@ -174,16 +173,14 @@ void ftrace_graph_caller(void)
 
 	unsigned long *frompc = &...;
 	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
-	/* passing frame pointer up is optional -- see below */
-	prepare_ftrace_return(frompc, selfpc, frame_pointer);
+	prepare_ftrace_return(frompc, selfpc);
 
 	/* restore all state needed by the ABI */
 }
 #endif
 
-For information on how to implement prepare_ftrace_return(), simply look at the
-x86 version (the frame pointer passing is optional; see the next section for
-more information).  The only architecture-specific piece in it is the setup of
+For information on how to implement prepare_ftrace_return(), simply look at
+the x86 version.  The only architecture-specific piece in it is the setup of
 the fault recovery table (the asm(...) code).  The rest should be the same
 across architectures.
 
@@ -208,23 +205,6 @@ void return_to_handler(void)
 #endif
 
 
-HAVE_FUNCTION_GRAPH_FP_TEST
----------------------------
-
-An arch may pass in a unique value (frame pointer) to both the entering and
-exiting of a function.  On exit, the value is compared and if it does not
-match, then it will panic the kernel.  This is largely a sanity check for bad
-code generation with gcc.  If gcc for your port sanely updates the frame
-pointer under different opitmization levels, then ignore this option.
-
-However, adding support for it isn't terribly difficult.  In your assembly code
-that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument.
-Then in the C version of that function, do what the x86 port does and pass it
-along to ftrace_push_return_trace() instead of a stub value of 0.
-
-Similarly, when you call ftrace_return_to_handler(), pass it the frame pointer.
-
-
 HAVE_FTRACE_NMI_ENTER
 ---------------------
 

trunk/Documentation/trace/ftrace.txt

@@ -1625,7 +1625,7 @@ If I am only interested in sys_nanosleep and hrtimer_interrupt:
 
  # echo sys_nanosleep hrtimer_interrupt \
 		> set_ftrace_filter
- # echo function > current_tracer
+ # echo ftrace > current_tracer
  # echo 1 > tracing_enabled
  # usleep 1
  # echo 0 > tracing_enabled

trunk/MAINTAINERS

@@ -410,8 +410,9 @@ F:	drivers/i2c/busses/i2c-ali1563.c
 
 ALPHA PORT
 M:	Richard Henderson <rth@twiddle.net>
+S:	Odd Fixes for 2.4; Maintained for 2.6.
 M:	Ivan Kokshaysky <ink@jurassic.park.msu.ru>
-M:	Matt Turner <mattst88@gmail.com>
+S:	Maintained for 2.4; PCI support for 2.6.
 L:	linux-alpha@vger.kernel.org
 F:	arch/alpha/
 
@@ -987,6 +988,7 @@ F:	drivers/platform/x86/asus-laptop.c
 
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
 M:	Dan Williams <dan.j.williams@intel.com>
+M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 W:	http://sourceforge.net/projects/xscaleiop
 S:	Supported
 F:	Documentation/crypto/async-tx-api.txt
@@ -1636,8 +1638,9 @@ S:	Maintained
 F:	sound/pci/cs5535audio/
 
 CX18 VIDEO4LINUX DRIVER
+M:	Hans Verkuil <hverkuil@xs4all.nl>
 M:	Andy Walls <awalls@radix.net>
-L:	ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
+L:	ivtv-devel@ivtvdriver.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://linuxtv.org
@@ -1822,6 +1825,7 @@ S:	Supported
 F:	fs/dlm/
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
+M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/
@@ -2784,7 +2788,7 @@ F:	arch/x86/kernel/microcode_core.c
 F:	arch/x86/kernel/microcode_intel.c
 
 INTEL I/OAT DMA DRIVER
-M:	Dan Williams <dan.j.williams@intel.com>
+M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 S:	Supported
 F:	drivers/dma/ioat*
 
@@ -2822,11 +2826,10 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ixp2000/
 
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
 M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
 M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
 M:	Bruce Allan <bruce.w.allan@intel.com>
-M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
@@ -2836,7 +2839,6 @@ F:	drivers/net/e100.c
 F:	drivers/net/e1000/
 F:	drivers/net/e1000e/
 F:	drivers/net/igb/
-F:	drivers/net/igbvf/
 F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
 
@@ -3010,8 +3012,8 @@ S:	Maintained
 F:	drivers/isdn/hardware/eicon/
 
 IVTV VIDEO4LINUX DRIVER
-M:	Andy Walls <awalls@radix.net>
-L:	ivtv-devel@ivtvdriver.org (moderated for non-subscribers)
+M:	Hans Verkuil <hverkuil@xs4all.nl>
+L:	ivtv-devel@ivtvdriver.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://www.ivtvdriver.org
@@ -3411,10 +3413,8 @@ S:	Maintained
 F:	drivers/scsi/sym53c8xx_2/
 
 LTP (Linux Test Project)
-M:	Rishikesh K Rajak <risrajak@linux.vnet.ibm.com>
-M:	Garrett Cooper <yanegomi@gmail.com>
-M:     Mike Frysinger <vapier@gentoo.org>
-M:     Subrata Modak <subrata@linux.vnet.ibm.com>
+M:	Subrata Modak <subrata@linux.vnet.ibm.com>
+M:	Mike Frysinger <vapier@gentoo.org>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
 W:	http://ltp.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
@@ -3838,7 +3838,6 @@ NETWORKING DRIVERS
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
 S:	Odd Fixes
 F:	drivers/net/
 F:	include/linux/if_*

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 33
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc4
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -18,9 +18,10 @@ MAKEFLAGS += -rR --no-print-directory
 
 # Avoid funny character set dependencies
 unexport LC_ALL
+LC_CTYPE=C
 LC_COLLATE=C
 LC_NUMERIC=C
-export LC_COLLATE LC_NUMERIC
+export LC_CTYPE LC_COLLATE LC_NUMERIC
 
 # We are using a recursive build, so we need to do a little thinking
 # to get the ordering right.

trunk/arch/alpha/include/asm/topology.h

@@ -28,9 +28,6 @@ static const struct cpumask *cpumask_of_node(int node)
 {
 	int cpu;
 
-	if (node == -1)
-		return cpu_all_mask;
-
 	cpumask_clear(&node_to_cpumask_map[node]);
 
 	for_each_online_cpu(cpu) {