---

yaml
---
r: 315169
b: refs/heads/master
c: 6eaf53c
h: refs/heads/master
i:
  315167: f5c0e2a
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d3bd3a5eeb087bf6a06e9bdfc589096608f933a0
+refs/heads/master: 6eaf53ca7bdae4506dbe6f0daaa93656f092383e

trunk/Documentation/networking/ip-sysctl.txt

@@ -551,20 +551,6 @@ tcp_thin_dupack - BOOLEAN
 	Documentation/networking/tcp-thin.txt
 	Default: 0
 
-tcp_limit_output_bytes - INTEGER
-	Controls TCP Small Queue limit per tcp socket.
-	TCP bulk sender tends to increase packets in flight until it
-	gets losses notifications. With SNDBUF autotuning, this can
-	result in a large amount of packets queued in qdisc/device
-	on the local machine, hurting latency of other flows, for
-	typical pfifo_fast qdiscs.
-	tcp_limit_output_bytes limits the number of bytes on qdisc
-	or device to reduce artificial RTT/cwnd and reduce bufferbloat.
-	Note: For GSO/TSO enabled flows, we try to have at least two
-	packets in flight. Reducing tcp_limit_output_bytes might also
-	reduce the size of individual GSO packet (64KB being the max)
-	Default: 131072
-
 UDP variables:
 
 udp_mem - vector of 3 INTEGERs: min, pressure, max

trunk/Documentation/networking/s2io.txt

@@ -136,6 +136,16 @@ For more information, please review the AMD8131 errata at
 http://vip.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/
 26310_AMD-8131_HyperTransport_PCI-X_Tunnel_Revision_Guide_rev_3_18.pdf
 
-6. Support
+6.  Available Downloads
+Neterion "s2io" driver in Red Hat and Suse 2.6-based distributions is kept up 
+to date, also the latest "s2io" code (including support for 2.4 kernels) is 
+available via "Support" link on the Neterion site:  http://www.neterion.com.
+
+For Xframe User Guide (Programming manual), visit ftp site ns1.s2io.com,
+user: linuxdocs password: HALdocs
+
+7. Support 
 For further support please contact either your 10GbE Xframe NIC vendor (IBM, 
-HP, SGI etc.)
+HP, SGI etc.) or click on the "Support" link on the Neterion site:  
+http://www.neterion.com.
+

trunk/Documentation/networking/vxge.txt

@@ -91,3 +91,10 @@ v)  addr_learn_en
        virtualization environment.
        Valid range: 0,1 (disabled, enabled respectively)
        Default: 0
+
+4) Troubleshooting:
+-------------------
+
+To resolve an issue with the source code or X3100 series adapter, please collect
+the statistics, register dumps using ethool, relevant logs and email them to
+support@neterion.com.

trunk/MAINTAINERS

@@ -4638,6 +4638,8 @@ F:	net/sched/sch_netem.c
 NETERION 10GbE DRIVERS (s2io/vxge)
 M:	Jon Mason <jdmason@kudzu.us>
 L:	netdev@vger.kernel.org
+W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
+W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
 S:	Supported
 F:	Documentation/networking/s2io.txt
 F:	Documentation/networking/vxge.txt

trunk/arch/m68k/include/asm/mcf8390.h → trunk/arch/m68k/include/asm/mcfne.h

@@ -1,7 +1,7 @@
 /****************************************************************************/
 
 /*
- *	mcf8390.h -- NS8390 support for ColdFire eval boards.
+ *	mcfne.h -- NE2000 in ColdFire eval boards.
  *
  *	(C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
  *	(C) Copyright 2000,      Lineo (www.lineo.com)
@@ -14,8 +14,8 @@
  */
 
 /****************************************************************************/
-#ifndef	mcf8390_h
-#define	mcf8390_h
+#ifndef	mcfne_h
+#define	mcfne_h
 /****************************************************************************/
 
 
@@ -37,7 +37,6 @@
 #if defined(CONFIG_ARN5206)
 #define NE2000_ADDR		0x40000300
 #define NE2000_ODDOFFSET	0x00010000
-#define NE2000_ADDRSIZE		0x00020000
 #define	NE2000_IRQ_VECTOR	0xf0
 #define	NE2000_IRQ_PRIORITY	2
 #define	NE2000_IRQ_LEVEL	4
@@ -47,7 +46,6 @@
 #if defined(CONFIG_M5206eC3)
 #define	NE2000_ADDR		0x40000300
 #define	NE2000_ODDOFFSET	0x00010000
-#define	NE2000_ADDRSIZE		0x00020000
 #define	NE2000_IRQ_VECTOR	0x1c
 #define	NE2000_IRQ_PRIORITY	2
 #define	NE2000_IRQ_LEVEL	4
@@ -56,7 +54,6 @@
 
 #if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
 #define NE2000_ADDR		0x30000300
-#define NE2000_ADDRSIZE		0x00001000
 #define NE2000_IRQ_VECTOR	25
 #define NE2000_IRQ_PRIORITY	1
 #define NE2000_IRQ_LEVEL	3
@@ -66,15 +63,13 @@
 #if defined(CONFIG_M5307C3)
 #define NE2000_ADDR		0x40000300
 #define NE2000_ODDOFFSET	0x00010000
-#define NE2000_ADDRSIZE		0x00020000
 #define NE2000_IRQ_VECTOR	0x1b
 #define	NE2000_BYTE		volatile unsigned short
 #endif
 
 #if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
 #define NE2000_ADDR		0x30600300
 #define NE2000_ODDOFFSET	0x00008000
-#define NE2000_ADDRSIZE		0x00010000
 #define NE2000_IRQ_VECTOR	67
 #undef	BSWAP
 #define	BSWAP(w)		(w)
@@ -87,7 +82,6 @@
 #define NE2000_ADDR0		0x30600300
 #define NE2000_ADDR1		0x30800300
 #define NE2000_ODDOFFSET	0x00008000
-#define NE2000_ADDRSIZE		0x00010000
 #define NE2000_IRQ_VECTOR0	27
 #define NE2000_IRQ_VECTOR1	29
 #undef	BSWAP
@@ -100,7 +94,6 @@
 #if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
 #define NE2000_ADDR		0x30600300
 #define NE2000_ODDOFFSET	0x00008000
-#define NE2000_ADDRSIZE		0x00010000
 #define NE2000_IRQ_VECTOR	27
 #undef	BSWAP
 #define	BSWAP(w)		(w)
@@ -112,7 +105,6 @@
 #if defined(CONFIG_ARN5307)
 #define NE2000_ADDR		0xfe600300
 #define NE2000_ODDOFFSET	0x00010000
-#define NE2000_ADDRSIZE		0x00020000
 #define NE2000_IRQ_VECTOR	0x1b
 #define NE2000_IRQ_PRIORITY	2
 #define NE2000_IRQ_LEVEL	3
@@ -122,10 +114,129 @@
 #if defined(CONFIG_M5407C3)
 #define NE2000_ADDR		0x40000300
 #define NE2000_ODDOFFSET	0x00010000
-#define NE2000_ADDRSIZE		0x00020000
 #define NE2000_IRQ_VECTOR	0x1b
 #define	NE2000_BYTE		volatile unsigned short
 #endif
 
 /****************************************************************************/
-#endif	/* mcf8390_h */
+
+/*
+ *	Side-band address space for odd address requires re-mapping
+ *	many of the standard ISA access functions.
+ */
+#ifdef NE2000_ODDOFFSET
+
+#undef outb
+#undef outb_p
+#undef inb
+#undef inb_p
+#undef outsb
+#undef outsw
+#undef insb
+#undef insw
+
+#define	outb	ne2000_outb
+#define	inb	ne2000_inb
+#define	outb_p	ne2000_outb
+#define	inb_p	ne2000_inb
+#define	outsb	ne2000_outsb
+#define	outsw	ne2000_outsw
+#define	insb	ne2000_insb
+#define	insw	ne2000_insw
+
+
+#ifndef COLDFIRE_NE2000_FUNCS
+
+void ne2000_outb(unsigned int val, unsigned int addr);
+int  ne2000_inb(unsigned int addr);
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
+
+#else
+
+/*
+ *	This macro converts a conventional register address into the
+ *	real memory pointer of the mapped NE2000 device.
+ *	On most NE2000 implementations on ColdFire boards the chip is
+ *	mapped in kinda funny, due to its ISA heritage.
+ */
+#define	NE2000_PTR(addr)	((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
+#define	NE2000_DATA_PTR(addr)	(addr)
+
+
+void ne2000_outb(unsigned int val, unsigned int addr)
+{
+	NE2000_BYTE	*rp;
+
+	rp = (NE2000_BYTE *) NE2000_PTR(addr);
+	*rp = RSWAP(val);
+}
+
+int ne2000_inb(unsigned int addr)
+{
+	NE2000_BYTE	*rp, val;
+
+	rp = (NE2000_BYTE *) NE2000_PTR(addr);
+	val = *rp;
+	return((int) ((NE2000_BYTE) RSWAP(val)));
+}
+
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+	NE2000_BYTE	*rp, val;
+	unsigned char	*buf;
+
+	buf = (unsigned char *) vbuf;
+	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *rp;
+		*buf++ = RSWAP(val);
+	}
+}
+
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		w, *buf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *rp;
+		*buf++ = BSWAP(w);
+	}
+}
+
+void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	NE2000_BYTE	*rp, val;
+	unsigned char	*buf;
+
+	buf = (unsigned char *) vbuf;
+	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		val = *buf++;
+		*rp = RSWAP(val);
+	}
+}
+
+void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+	volatile unsigned short	*rp;
+	unsigned short		w, *buf;
+
+	buf = (unsigned short *) vbuf;
+	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+	for (; (len > 0); len--) {
+		w = *buf++;
+		*rp = BSWAP(w);
+	}
+}
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+#endif /* NE2000_OFFOFFSET */
+
+/****************************************************************************/
+#endif	/* mcfne_h */

trunk/drivers/ieee802154/at86rf230.c

@@ -543,13 +543,6 @@ at86rf230_xmit(struct ieee802154_dev *dev, struct sk_buff *skb)
 	int rc;
 	unsigned long flags;
 
-	spin_lock(&lp->lock);
-	if  (lp->irq_disabled) {
-		spin_unlock(&lp->lock);
-		return -EBUSY;
-	}
-	spin_unlock(&lp->lock);
-
 	might_sleep();
 
 	rc = at86rf230_state(dev, STATE_FORCE_TX_ON);
@@ -599,8 +592,12 @@ static int at86rf230_rx(struct at86rf230_local *lp)
 	if (!skb)
 		return -ENOMEM;
 
-	if (at86rf230_read_fbuf(lp, skb_put(skb, len), &len, &lqi))
+	if (at86rf230_write_subreg(lp, SR_RX_PDT_DIS, 1) ||
+	    at86rf230_read_fbuf(lp, skb_put(skb, len), &len, &lqi) ||
+	    at86rf230_write_subreg(lp, SR_RX_SAFE_MODE, 1) ||
+	    at86rf230_write_subreg(lp, SR_RX_PDT_DIS, 0)) {
 		goto err;
+	}
 
 	if (len < 2)
 		goto err;
@@ -636,6 +633,7 @@ static void at86rf230_irqwork(struct work_struct *work)
 	int rc;
 	unsigned long flags;
 
+	spin_lock_irqsave(&lp->lock, flags);
 	rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &val);
 	status |= val;
 
@@ -645,33 +643,31 @@ static void at86rf230_irqwork(struct work_struct *work)
 	status &= ~IRQ_TRX_UR; /* FIXME: possibly handle ???*/
 
 	if (status & IRQ_TRX_END) {
-		spin_lock_irqsave(&lp->lock, flags);
 		status &= ~IRQ_TRX_END;
 		if (lp->is_tx) {
 			lp->is_tx = 0;
-			spin_unlock_irqrestore(&lp->lock, flags);
 			complete(&lp->tx_complete);
 		} else {
-			spin_unlock_irqrestore(&lp->lock, flags);
 			at86rf230_rx(lp);
 		}
 	}
 
-	spin_lock_irqsave(&lp->lock, flags);
-	lp->irq_disabled = 0;
+	if (lp->irq_disabled) {
+		lp->irq_disabled = 0;
+		enable_irq(lp->spi->irq);
+	}
 	spin_unlock_irqrestore(&lp->lock, flags);
-
-	enable_irq(lp->spi->irq);
 }
 
 static irqreturn_t at86rf230_isr(int irq, void *data)
 {
 	struct at86rf230_local *lp = data;
 
-	disable_irq_nosync(irq);
-
 	spin_lock(&lp->lock);
-	lp->irq_disabled = 1;
+	if (!lp->irq_disabled) {
+		disable_irq_nosync(irq);
+		lp->irq_disabled = 1;
+	}
 	spin_unlock(&lp->lock);
 
 	schedule_work(&lp->irqwork);

trunk/drivers/infiniband/ulp/ipoib/ipoib_ib.c

@@ -123,7 +123,7 @@ static void ipoib_ud_skb_put_frags(struct ipoib_dev_priv *priv,
 
 		skb_frag_size_set(frag, size);
 		skb->data_len += size;
-		skb->truesize += PAGE_SIZE;
+		skb->truesize += size;
 	} else
 		skb_put(skb, length);
 
@@ -156,18 +156,14 @@ static struct sk_buff *ipoib_alloc_rx_skb(struct net_device *dev, int id)
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	struct sk_buff *skb;
 	int buf_size;
-	int tailroom;
 	u64 *mapping;
 
-	if (ipoib_ud_need_sg(priv->max_ib_mtu)) {
+	if (ipoib_ud_need_sg(priv->max_ib_mtu))
 		buf_size = IPOIB_UD_HEAD_SIZE;
-		tailroom = 128; /* reserve some tailroom for IP/TCP headers */
-	} else {
+	else
 		buf_size = IPOIB_UD_BUF_SIZE(priv->max_ib_mtu);
-		tailroom = 0;
-	}
 
-	skb = dev_alloc_skb(buf_size + tailroom + 4);
+	skb = dev_alloc_skb(buf_size + 4);
 	if (unlikely(!skb))
 		return NULL;
 

trunk/drivers/isdn/mISDN/stack.c

@@ -135,8 +135,8 @@ send_layer2(struct mISDNstack *st, struct sk_buff *skb)
 			skb = NULL;
 		else if (*debug & DEBUG_SEND_ERR)
 			printk(KERN_DEBUG
-			       "%s mgr prim(%x) err %d\n",
-			       __func__, hh->prim, ret);
+			       "%s ch%d mgr prim(%x) addr(%x) err %d\n",
+			       __func__, ch->nr, hh->prim, ch->addr, ret);
 	}
 out:
 	mutex_unlock(&st->lmutex);