---

yaml
---
r: 23644
b: refs/heads/master
c: 2474ed4
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 49965a80a4c4f5cbe15fb3bb1f8f8b0ec4ef02bc
+refs/heads/master: 2474ed444b475614ef795523076be7cc8437ae00

trunk/drivers/media/video/bt8xx/bttv-driver.c

@@ -37,6 +37,7 @@
 #include "bttvp.h"
 #include <media/v4l2-common.h>
 #include <media/tvaudio.h>
+#include <media/msp3400.h>
 
 #include <linux/dma-mapping.h>
 
@@ -934,11 +935,9 @@ static int
 audio_mux(struct bttv *btv, int input, int mute)
 {
 	int gpio_val, signal;
-	struct v4l2_audio aud_input;
 	struct v4l2_control ctrl;
 	struct i2c_client *c;
 
-	memset(&aud_input, 0, sizeof(aud_input));
 	gpio_inout(bttv_tvcards[btv->c.type].gpiomask,
 		   bttv_tvcards[btv->c.type].gpiomask);
 	signal = btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC;
@@ -953,7 +952,6 @@ audio_mux(struct bttv *btv, int input, int mute)
 		gpio_val = bttv_tvcards[btv->c.type].gpiomute;
 	else
 		gpio_val = bttv_tvcards[btv->c.type].gpiomux[input];
-	aud_input.index = btv->audio;
 
 	gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpio_val);
 	if (bttv_gpio)
@@ -962,15 +960,51 @@ audio_mux(struct bttv *btv, int input, int mute)
 		return 0;
 
 	ctrl.id = V4L2_CID_AUDIO_MUTE;
-	/* take automute into account, just btv->mute is not enough */
-	ctrl.value = mute;
+	ctrl.value = btv->mute;
 	bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, &ctrl);
 	c = btv->i2c_msp34xx_client;
-	if (c)
-		c->driver->command(c, VIDIOC_S_AUDIO, &aud_input);
+	if (c) {
+		struct v4l2_routing route;
+
+		/* Note: the inputs tuner/radio/extern/intern are translated
+		   to msp routings. This assumes common behavior for all msp3400
+		   based TV cards. When this assumption fails, then the
+		   specific MSP routing must be added to the card table.
+		   For now this is sufficient. */
+		switch (input) {
+		case TVAUDIO_INPUT_RADIO:
+			route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1,
+				    MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART);
+			break;
+		case TVAUDIO_INPUT_EXTERN:
+			route.input = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1,
+				    MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART);
+			break;
+		case TVAUDIO_INPUT_INTERN:
+			/* Yes, this is the same input as for RADIO. I doubt
+			   if this is ever used. The only board with an INTERN
+			   input is the BTTV_BOARD_AVERMEDIA98. I wonder how
+			   that was tested. My guess is that the whole INTERN
+			   input does not work. */
+			route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1,
+				    MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART);
+			break;
+		case TVAUDIO_INPUT_TUNER:
+		default:
+			route.input = MSP_INPUT_DEFAULT;
+			break;
+		}
+		route.output = MSP_OUTPUT_DEFAULT;
+		c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route);
+	}
 	c = btv->i2c_tvaudio_client;
-	if (c)
-		c->driver->command(c, VIDIOC_S_AUDIO, &aud_input);
+	if (c) {
+		struct v4l2_routing route;
+
+		route.input = input;
+		route.output = 0;
+		c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route);
+	}
 	return 0;
 }
 

trunk/drivers/media/video/em28xx/em28xx-cards.c

@@ -28,8 +28,9 @@
 #include <linux/i2c.h>
 #include <linux/usb.h>
 #include <media/tuner.h>
-#include <media/audiochip.h>
+#include <media/msp3400.h>
 #include <media/tveeprom.h>
+#include <media/audiochip.h>
 #include <media/v4l2-common.h>
 
 #include "em28xx.h"
@@ -146,11 +147,12 @@ struct em28xx_board em28xx_boards[] = {
 		.input          = {{
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = 0,
-			.amux     = 6,
+			.amux     = MSP_INPUT_DEFAULT,
 		},{
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = 2,
-			.amux     = 1,
+			.amux     = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1,
+					MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART),
 		}},
 	},
 	[EM2820_BOARD_MSI_VOX_USB_2] = {

trunk/drivers/media/video/em28xx/em28xx-video.c

@@ -38,6 +38,7 @@
 #include "em28xx.h"
 #include <media/tuner.h>
 #include <media/v4l2-common.h>
+#include <media/msp3400.h>
 
 #define DRIVER_AUTHOR "Ludovico Cavedon <cavedon@sssup.it>, " \
 		      "Markus Rechberger <mrechberger@gmail.com>, " \
@@ -216,9 +217,14 @@ static void video_mux(struct em28xx *dev, int index)
 	em28xx_videodbg("Setting input index=%d, vmux=%d, amux=%d\n",index,input,dev->ctl_ainput);
 
 	if (dev->has_msp34xx) {
+		struct v4l2_routing route;
+
 		if (dev->i2s_speed)
 			em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ, &dev->i2s_speed);
-		em28xx_i2c_call_clients(dev, VIDIOC_S_AUDIO, &dev->ctl_ainput);
+		route.input = dev->ctl_ainput;
+		route.output = MSP_OUTPUT(MSP_OUT_SCART1_DA);
+		/* Note: this is msp3400 specific */
+		em28xx_i2c_call_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING, &route);
 		ainput = EM28XX_AUDIO_SRC_TUNER;
 		em28xx_audio_source(dev, ainput);
 	} else {

trunk/drivers/media/video/msp3400-driver.c

@@ -555,7 +555,6 @@ static int msp_set_ctrl(struct i2c_client *client, struct v4l2_control *ctrl)
 static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 {
 	struct msp_state *state = i2c_get_clientdata(client);
-	int scart = -1;
 
 	if (msp_debug >= 2)
 		v4l_i2c_print_ioctl(client, cmd);
@@ -660,15 +659,6 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 		break;
 	}
 
-	/* msp34xx specific */
-	case MSP_SET_MATRIX:
-	{
-		struct msp_matrix *mspm = arg;
-
-		msp_set_scart(client, mspm->input - 1, mspm->output);
-		break;
-	}
-
 	/* --- v4l2 ioctls --- */
 	case VIDIOC_S_STD:
 	{
@@ -682,36 +672,38 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 		return 0;
 	}
 
-	case VIDIOC_S_AUDIO:
+	case VIDIOC_INT_G_AUDIO_ROUTING:
 	{
-		struct v4l2_audio *sarg = arg;
+		struct v4l2_routing *rt = arg;
 
-		switch (sarg->index) {
-		case TVAUDIO_INPUT_RADIO:
-			/* Hauppauge uses IN2 for the radio */
-			state->mode = MSP_MODE_FM_RADIO;
-			scart       = SCART_IN2;
-			break;
-		case TVAUDIO_INPUT_EXTERN:
-			/* IN1 is often used for external input ... */
-			state->mode = MSP_MODE_EXTERN;
-			scart       = SCART_IN1;
-			break;
-		case TVAUDIO_INPUT_INTERN:
-			/* ... sometimes it is IN2 through ;) */
-			state->mode = MSP_MODE_EXTERN;
-			scart       = SCART_IN2;
-			break;
-		case TVAUDIO_INPUT_TUNER:
-			state->mode = -1;
-			break;
-		}
-		if (scart >= 0) {
-			state->rxsubchans = V4L2_TUNER_SUB_STEREO;
-			msp_set_scart(client, scart, 0);
+		*rt = state->routing;
+		break;
+	}
+
+	case VIDIOC_INT_S_AUDIO_ROUTING:
+	{
+		struct v4l2_routing *rt = arg;
+		int tuner = (rt->input >> 3) & 1;
+		int old_tuner = (state->routing.input >> 3) & 1;
+		int sc_in = rt->input & 0x7;
+		int sc1_out = rt->output & 0xf;
+		int sc2_out = (rt->output >> 4) & 0xf;
+		u16 val;
+
+		state->routing = *rt;
+		if (state->opmode == OPMODE_AUTOSELECT) {
+			val = msp_read_dem(client, 0x30) & ~0x100;
+			msp_write_dem(client, 0x30, val | (tuner ? 0x100 : 0));
+		} else {
+			val = msp_read_dem(client, 0xbb) & ~0x100;
+			msp_write_dem(client, 0xbb, val | (tuner ? 0x100 : 0));
 		}
+		msp_set_scart(client, sc_in, 0);
+		msp_set_scart(client, sc1_out, 1);
+		msp_set_scart(client, sc2_out, 2);
 		msp_set_audmode(client);
-		msp_wake_thread(client);
+		if (tuner != old_tuner)
+			msp_wake_thread(client);
 		break;
 	}
 
@@ -941,6 +933,9 @@ static int msp_attach(struct i2c_adapter *adapter, int address, int kind)
 	state->muted = 0;
 	state->i2s_mode = 0;
 	init_waitqueue_head(&state->wq);
+	/* These are the reset input/output positions */
+	state->routing.input = MSP_INPUT_DEFAULT;
+	state->routing.output = MSP_OUTPUT_DEFAULT;
 
 	state->rev1 = msp_read_dsp(client, 0x1e);
 	if (state->rev1 != -1)

trunk/drivers/media/video/msp3400-driver.h

@@ -4,6 +4,8 @@
 #ifndef MSP3400_DRIVER_H
 #define MSP3400_DRIVER_H
 
+#include <media/msp3400.h>
+
 /* ---------------------------------------------------------------------- */
 
 /* This macro is allowed for *constants* only, gcc must calculate it
@@ -72,7 +74,7 @@ struct msp_state {
 	int i2s_mode;
 	int main, second;	/* sound carrier */
 	int input;
-	int source;             /* see msp34xxg_set_source */
+	struct v4l2_routing routing;
 
 	/* v4l2 */
 	int audmode;