---

yaml
---
r: 76848
b: refs/heads/master
c: bbdd267
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: b8b50e353b85bc3c791dd2b99370ac300ebcd186
+refs/heads/master: bbdd267ef2796e96b461b8447b2026ce06e6ec4b

trunk/drivers/infiniband/hw/ehca/ehca_classes.h

@@ -95,6 +95,10 @@ struct ehca_sma_attr {
 struct ehca_sport {
 	struct ib_cq *ibcq_aqp1;
 	struct ib_qp *ibqp_sqp[2];
+	/* lock to serialze modify_qp() calls for sqp in normal
+	 * and irq path (when event PORT_ACTIVE is received first time)
+	 */
+	spinlock_t mod_sqp_lock;
 	enum ib_port_state port_state;
 	struct ehca_sma_attr saved_attr;
 };
@@ -141,6 +145,14 @@ enum ehca_ext_qp_type {
 	EQPT_SRQ       = 3,
 };
 
+/* struct to cache modify_qp()'s parms for GSI/SMI qp */
+struct ehca_mod_qp_parm {
+	int mask;
+	struct ib_qp_attr attr;
+};
+
+#define EHCA_MOD_QP_PARM_MAX 4
+
 struct ehca_qp {
 	union {
 		struct ib_qp ib_qp;
@@ -164,6 +176,9 @@ struct ehca_qp {
 	struct ehca_cq *recv_cq;
 	unsigned int sqerr_purgeflag;
 	struct hlist_node list_entries;
+	/* array to cache modify_qp()'s parms for GSI/SMI qp */
+	struct ehca_mod_qp_parm *mod_qp_parm;
+	int mod_qp_parm_idx;
 	/* mmap counter for resources mapped into user space */
 	u32 mm_count_squeue;
 	u32 mm_count_rqueue;
@@ -323,6 +338,7 @@ extern int ehca_port_act_time;
 extern int ehca_use_hp_mr;
 extern int ehca_scaling_code;
 extern int ehca_lock_hcalls;
+extern int ehca_nr_ports;
 
 struct ipzu_queue_resp {
 	u32 qe_size;      /* queue entry size */

trunk/drivers/infiniband/hw/ehca/ehca_irq.c

@@ -356,17 +356,33 @@ static void parse_ec(struct ehca_shca *shca, u64 eqe)
 	u8 ec   = EHCA_BMASK_GET(NEQE_EVENT_CODE, eqe);
 	u8 port = EHCA_BMASK_GET(NEQE_PORT_NUMBER, eqe);
 	u8 spec_event;
+	struct ehca_sport *sport = &shca->sport[port - 1];
+	unsigned long flags;
 
 	switch (ec) {
 	case 0x30: /* port availability change */
 		if (EHCA_BMASK_GET(NEQE_PORT_AVAILABILITY, eqe)) {
-			shca->sport[port - 1].port_state = IB_PORT_ACTIVE;
+			int suppress_event;
+			/* replay modify_qp for sqps */
+			spin_lock_irqsave(&sport->mod_sqp_lock, flags);
+			suppress_event = !sport->ibqp_sqp[IB_QPT_GSI];
+			if (sport->ibqp_sqp[IB_QPT_SMI])
+				ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]);
+			if (!suppress_event)
+				ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]);
+			spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
+
+			/* AQP1 was destroyed, ignore this event */
+			if (suppress_event)
+				break;
+
+			sport->port_state = IB_PORT_ACTIVE;
 			dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE,
 					    "is active");
 			ehca_query_sma_attr(shca, port,
-					    &shca->sport[port - 1].saved_attr);
+					    &sport->saved_attr);
 		} else {
-			shca->sport[port - 1].port_state = IB_PORT_DOWN;
+			sport->port_state = IB_PORT_DOWN;
 			dispatch_port_event(shca, port, IB_EVENT_PORT_ERR,
 					    "is inactive");
 		}
@@ -380,11 +396,11 @@ static void parse_ec(struct ehca_shca *shca, u64 eqe)
 			ehca_warn(&shca->ib_device, "disruptive port "
 				  "%d configuration change", port);
 
-			shca->sport[port - 1].port_state = IB_PORT_DOWN;
+			sport->port_state = IB_PORT_DOWN;
 			dispatch_port_event(shca, port, IB_EVENT_PORT_ERR,
 					    "is inactive");
 
-			shca->sport[port - 1].port_state = IB_PORT_ACTIVE;
+			sport->port_state = IB_PORT_ACTIVE;
 			dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE,
 					    "is active");
 		} else

trunk/drivers/infiniband/hw/ehca/ehca_iverbs.h

@@ -200,4 +200,6 @@ void ehca_free_fw_ctrlblock(void *ptr);
 #define ehca_free_fw_ctrlblock(ptr) free_page((unsigned long)(ptr))
 #endif
 
+void ehca_recover_sqp(struct ib_qp *sqp);
+
 #endif

trunk/drivers/infiniband/hw/ehca/ehca_main.c

@@ -90,7 +90,8 @@ MODULE_PARM_DESC(hw_level,
 		 "hardware level"
 		 " (0: autosensing (default), 1: v. 0.20, 2: v. 0.21)");
 MODULE_PARM_DESC(nr_ports,
-		 "number of connected ports (default: 2)");
+		 "number of connected ports (-1: autodetect, 1: port one only, "
+		 "2: two ports (default)");
 MODULE_PARM_DESC(use_hp_mr,
 		 "high performance MRs (0: no (default), 1: yes)");
 MODULE_PARM_DESC(port_act_time,
@@ -693,7 +694,7 @@ static int __devinit ehca_probe(struct of_device *dev,
 	struct ehca_shca *shca;
 	const u64 *handle;
 	struct ib_pd *ibpd;
-	int ret;
+	int ret, i;
 
 	handle = of_get_property(dev->node, "ibm,hca-handle", NULL);
 	if (!handle) {
@@ -714,6 +715,8 @@ static int __devinit ehca_probe(struct of_device *dev,
 		return -ENOMEM;
 	}
 	mutex_init(&shca->modify_mutex);
+	for (i = 0; i < ARRAY_SIZE(shca->sport); i++)
+		spin_lock_init(&shca->sport[i].mod_sqp_lock);
 
 	shca->ofdev = dev;
 	shca->ipz_hca_handle.handle = *handle;

trunk/drivers/infiniband/hw/ehca/ehca_qp.c

@@ -729,12 +729,31 @@ static struct ehca_qp *internal_create_qp(
 	init_attr->cap.max_send_wr = parms.squeue.act_nr_wqes;
 	my_qp->init_attr = *init_attr;
 
+	if (qp_type == IB_QPT_SMI || qp_type == IB_QPT_GSI) {
+		shca->sport[init_attr->port_num - 1].ibqp_sqp[qp_type] =
+			&my_qp->ib_qp;
+		if (ehca_nr_ports < 0) {
+			/* alloc array to cache subsequent modify qp parms
+			 * for autodetect mode
+			 */
+			my_qp->mod_qp_parm =
+				kzalloc(EHCA_MOD_QP_PARM_MAX *
+					sizeof(*my_qp->mod_qp_parm),
+					GFP_KERNEL);
+			if (!my_qp->mod_qp_parm) {
+				ehca_err(pd->device,
+					 "Could not alloc mod_qp_parm");
+				goto create_qp_exit4;
+			}
+		}
+	}
+
 	/* NOTE: define_apq0() not supported yet */
 	if (qp_type == IB_QPT_GSI) {
 		h_ret = ehca_define_sqp(shca, my_qp, init_attr);
 		if (h_ret != H_SUCCESS) {
 			ret = ehca2ib_return_code(h_ret);
-			goto create_qp_exit4;
+			goto create_qp_exit5;
 		}
 	}
 
@@ -743,7 +762,7 @@ static struct ehca_qp *internal_create_qp(
 		if (ret) {
 			ehca_err(pd->device,
 				 "Couldn't assign qp to send_cq ret=%i", ret);
-			goto create_qp_exit4;
+			goto create_qp_exit5;
 		}
 	}
 
@@ -769,15 +788,18 @@ static struct ehca_qp *internal_create_qp(
 		if (ib_copy_to_udata(udata, &resp, sizeof resp)) {
 			ehca_err(pd->device, "Copy to udata failed");
 			ret = -EINVAL;
-			goto create_qp_exit5;
+			goto create_qp_exit6;
 		}
 	}
 
 	return my_qp;
 
-create_qp_exit5:
+create_qp_exit6:
 	ehca_cq_unassign_qp(my_qp->send_cq, my_qp->real_qp_num);
 
+create_qp_exit5:
+	kfree(my_qp->mod_qp_parm);
+
 create_qp_exit4:
 	if (HAS_RQ(my_qp))
 		ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
@@ -995,7 +1017,7 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 	unsigned long flags = 0;
 
 	/* do query_qp to obtain current attr values */
-	mqpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
+	mqpcb = ehca_alloc_fw_ctrlblock(GFP_ATOMIC);
 	if (!mqpcb) {
 		ehca_err(ibqp->device, "Could not get zeroed page for mqpcb "
 			 "ehca_qp=%p qp_num=%x ", my_qp, ibqp->qp_num);
@@ -1183,6 +1205,8 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 		update_mask |= EHCA_BMASK_SET(MQPCB_MASK_PRIM_P_KEY_IDX, 1);
 	}
 	if (attr_mask & IB_QP_PORT) {
+		struct ehca_sport *sport;
+		struct ehca_qp *aqp1;
 		if (attr->port_num < 1 || attr->port_num > shca->num_ports) {
 			ret = -EINVAL;
 			ehca_err(ibqp->device, "Invalid port=%x. "
@@ -1191,6 +1215,29 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 				 shca->num_ports);
 			goto modify_qp_exit2;
 		}
+		sport = &shca->sport[attr->port_num - 1];
+		if (!sport->ibqp_sqp[IB_QPT_GSI]) {
+			/* should not occur */
+			ret = -EFAULT;
+			ehca_err(ibqp->device, "AQP1 was not created for "
+				 "port=%x", attr->port_num);
+			goto modify_qp_exit2;
+		}
+		aqp1 = container_of(sport->ibqp_sqp[IB_QPT_GSI],
+				    struct ehca_qp, ib_qp);
+		if (ibqp->qp_type != IB_QPT_GSI &&
+		    ibqp->qp_type != IB_QPT_SMI &&
+		    aqp1->mod_qp_parm) {
+			/*
+			 * firmware will reject this modify_qp() because
+			 * port is not activated/initialized fully
+			 */
+			ret = -EFAULT;
+			ehca_warn(ibqp->device, "Couldn't modify qp port=%x: "
+				  "either port is being activated (try again) "
+				  "or cabling issue", attr->port_num);
+			goto modify_qp_exit2;
+		}
 		mqpcb->prim_phys_port = attr->port_num;
 		update_mask |= EHCA_BMASK_SET(MQPCB_MASK_PRIM_PHYS_PORT, 1);
 	}
@@ -1470,6 +1517,8 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
 		   struct ib_udata *udata)
 {
+	struct ehca_shca *shca = container_of(ibqp->device, struct ehca_shca,
+					      ib_device);
 	struct ehca_qp *my_qp = container_of(ibqp, struct ehca_qp, ib_qp);
 	struct ehca_pd *my_pd = container_of(my_qp->ib_qp.pd, struct ehca_pd,
 					     ib_pd);
@@ -1482,9 +1531,100 @@ int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
 		return -EINVAL;
 	}
 
+	/* The if-block below caches qp_attr to be modified for GSI and SMI
+	 * qps during the initialization by ib_mad. When the respective port
+	 * is activated, ie we got an event PORT_ACTIVE, we'll replay the
+	 * cached modify calls sequence, see ehca_recover_sqs() below.
+	 * Why that is required:
+	 * 1) If one port is connected, older code requires that port one
+	 *    to be connected and module option nr_ports=1 to be given by
+	 *    user, which is very inconvenient for end user.
+	 * 2) Firmware accepts modify_qp() only if respective port has become
+	 *    active. Older code had a wait loop of 30sec create_qp()/
+	 *    define_aqp1(), which is not appropriate in practice. This
+	 *    code now removes that wait loop, see define_aqp1(), and always
+	 *    reports all ports to ib_mad resp. users. Only activated ports
+	 *    will then usable for the users.
+	 */
+	if (ibqp->qp_type == IB_QPT_GSI || ibqp->qp_type == IB_QPT_SMI) {
+		int port = my_qp->init_attr.port_num;
+		struct ehca_sport *sport = &shca->sport[port - 1];
+		unsigned long flags;
+		spin_lock_irqsave(&sport->mod_sqp_lock, flags);
+		/* cache qp_attr only during init */
+		if (my_qp->mod_qp_parm) {
+			struct ehca_mod_qp_parm *p;
+			if (my_qp->mod_qp_parm_idx >= EHCA_MOD_QP_PARM_MAX) {
+				ehca_err(&shca->ib_device,
+					 "mod_qp_parm overflow state=%x port=%x"
+					 " type=%x", attr->qp_state,
+					 my_qp->init_attr.port_num,
+					 ibqp->qp_type);
+				spin_unlock_irqrestore(&sport->mod_sqp_lock,
+						       flags);
+				return -EINVAL;
+			}
+			p = &my_qp->mod_qp_parm[my_qp->mod_qp_parm_idx];
+			p->mask = attr_mask;
+			p->attr = *attr;
+			my_qp->mod_qp_parm_idx++;
+			ehca_dbg(&shca->ib_device,
+				 "Saved qp_attr for state=%x port=%x type=%x",
+				 attr->qp_state, my_qp->init_attr.port_num,
+				 ibqp->qp_type);
+			spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
+			return 0;
+		}
+		spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
+	}
+
 	return internal_modify_qp(ibqp, attr, attr_mask, 0);
 }
 
+void ehca_recover_sqp(struct ib_qp *sqp)
+{
+	struct ehca_qp *my_sqp = container_of(sqp, struct ehca_qp, ib_qp);
+	int port = my_sqp->init_attr.port_num;
+	struct ib_qp_attr attr;
+	struct ehca_mod_qp_parm *qp_parm;
+	int i, qp_parm_idx, ret;
+	unsigned long flags, wr_cnt;
+
+	if (!my_sqp->mod_qp_parm)
+		return;
+	ehca_dbg(sqp->device, "SQP port=%x qp_num=%x", port, sqp->qp_num);
+
+	qp_parm = my_sqp->mod_qp_parm;
+	qp_parm_idx = my_sqp->mod_qp_parm_idx;
+	for (i = 0; i < qp_parm_idx; i++) {
+		attr = qp_parm[i].attr;
+		ret = internal_modify_qp(sqp, &attr, qp_parm[i].mask, 0);
+		if (ret) {
+			ehca_err(sqp->device, "Could not modify SQP port=%x "
+				 "qp_num=%x ret=%x", port, sqp->qp_num, ret);
+			goto free_qp_parm;
+		}
+		ehca_dbg(sqp->device, "SQP port=%x qp_num=%x in state=%x",
+			 port, sqp->qp_num, attr.qp_state);
+	}
+
+	/* re-trigger posted recv wrs */
+	wr_cnt =  my_sqp->ipz_rqueue.current_q_offset /
+		my_sqp->ipz_rqueue.qe_size;
+	if (wr_cnt) {
+		spin_lock_irqsave(&my_sqp->spinlock_r, flags);
+		hipz_update_rqa(my_sqp, wr_cnt);
+		spin_unlock_irqrestore(&my_sqp->spinlock_r, flags);
+		ehca_dbg(sqp->device, "doorbell port=%x qp_num=%x wr_cnt=%lx",
+			 port, sqp->qp_num, wr_cnt);
+	}
+
+free_qp_parm:
+	kfree(qp_parm);
+	/* this prevents subsequent calls to modify_qp() to cache qp_attr */
+	my_sqp->mod_qp_parm = NULL;
+}
+
 int ehca_query_qp(struct ib_qp *qp,
 		  struct ib_qp_attr *qp_attr,
 		  int qp_attr_mask, struct ib_qp_init_attr *qp_init_attr)
@@ -1772,6 +1912,7 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 	struct ehca_shca *shca = container_of(dev, struct ehca_shca, ib_device);
 	struct ehca_pd *my_pd = container_of(my_qp->ib_qp.pd, struct ehca_pd,
 					     ib_pd);
+	struct ehca_sport *sport = &shca->sport[my_qp->init_attr.port_num - 1];
 	u32 cur_pid = current->tgid;
 	u32 qp_num = my_qp->real_qp_num;
 	int ret;
@@ -1818,6 +1959,14 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 	port_num = my_qp->init_attr.port_num;
 	qp_type  = my_qp->init_attr.qp_type;
 
+	if (qp_type == IB_QPT_SMI || qp_type == IB_QPT_GSI) {
+		spin_lock_irqsave(&sport->mod_sqp_lock, flags);
+		kfree(my_qp->mod_qp_parm);
+		my_qp->mod_qp_parm = NULL;
+		shca->sport[port_num - 1].ibqp_sqp[qp_type] = NULL;
+		spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
+	}
+
 	/* no support for IB_QPT_SMI yet */
 	if (qp_type == IB_QPT_GSI) {
 		struct ib_event event;

trunk/drivers/infiniband/hw/ehca/ehca_sqp.c

@@ -40,11 +40,8 @@
  */
 
 
-#include <linux/module.h>
-#include <linux/err.h>
 #include "ehca_classes.h"
 #include "ehca_tools.h"
-#include "ehca_qes.h"
 #include "ehca_iverbs.h"
 #include "hcp_if.h"
 
@@ -93,6 +90,9 @@ u64 ehca_define_sqp(struct ehca_shca *shca,
 		return H_PARAMETER;
 	}
 
+	if (ehca_nr_ports < 0) /* autodetect mode */
+		return H_SUCCESS;
+
 	for (counter = 0;
 	     shca->sport[port - 1].port_state != IB_PORT_ACTIVE &&
 		     counter < ehca_port_act_time;