Merge commit 'gcl/next' into next

Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt

@@ -0,0 +1,70 @@
+MPC5121 PSC Device Tree Bindings
+
+PSC in UART mode
+----------------
+
+For PSC in UART mode the needed PSC serial devices
+are specified by fsl,mpc5121-psc-uart nodes in the
+fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
+Controller node fsl,mpc5121-psc-fifo is requered there:
+
+fsl,mpc5121-psc-uart nodes
+--------------------------
+
+Required properties :
+ - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
+ - cell-index : Index of the PSC in hardware
+ - reg : Offset and length of the register set for the PSC device
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+Recommended properties :
+ - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
+ - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+
+
+fsl,mpc5121-psc-fifo node
+-------------------------
+
+Required properties :
+ - compatible : Should be "fsl,mpc5121-psc-fifo"
+ - reg : Offset and length of the register set for the PSC
+         FIFO Controller
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+
+
+Example for a board using PSC0 and PSC1 devices in serial mode:
+
+serial@11000 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <0>;
+	reg = <0x11000 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+serial@11100 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <1>;
+	reg = <0x11100 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+pscfifo@11f00 {
+	compatible = "fsl,mpc5121-psc-fifo";
+	reg = <0x11f00 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+};

Documentation/powerpc/dts-bindings/fsl/spi.txt

@@ -13,6 +13,11 @@ Required properties:
 - interrupt-parent : the phandle for the interrupt controller that
   services interrupts for this device.
 
+Optional properties:
+- gpios : specifies the gpio pins to be used for chipselects.
+  The gpios will be referred to as reg = <index> in the SPI child nodes.
+  If unspecified, a single SPI device without a chip select can be used.
+
 Example:
 	spi@4c0 {
 		cell-index = <0>;
@@ -21,4 +26,6 @@ Example:
 		interrupts = <82 0>;
 		interrupt-parent = <700>;
 		mode = "cpu";
+		gpios = <&gpio 18 1	// device reg=<0>
+			 &gpio 19 1>;	// device reg=<1>
 	};

arch/powerpc/boot/dts/mpc5121ads.dts

@@ -62,17 +62,12 @@
 		interrupt-parent = < &ipic >;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		bank-width = <1>;
 		// ADS has two Hynix 512MB Nand flash chips in a single
-		// stacked package .
+		// stacked package.
 		chips = <2>;
-		nand0@0 {
-			label = "nand0";
-			reg = <0x00000000 0x02000000>; 	// first 32 MB of chip 0
-		};
-		nand1@20000000 {
-			label = "nand1";
-			reg = <0x20000000 0x02000000>; 	// first 32 MB of chip 1
+		nand@0 {
+			label = "nand";
+			reg = <0x00000000 0x40000000>;	// 512MB + 512MB
 		};
 	};
 
@@ -166,6 +161,11 @@
 			interrupt-parent = < &ipic >;
 		};
 
+		reset@e00 {	// Reset module
+			compatible = "fsl,mpc5121-reset";
+			reg = <0xe00 0x100>;
+		};
+
 		clock@f00 {	// Clock control
 			compatible = "fsl,mpc5121-clock";
 			reg = <0xf00 0x100>;
@@ -185,17 +185,15 @@
 			interrupt-parent = < &ipic >;
 		};
 
-		mscan@1300 {
+		can@1300 {
 			compatible = "fsl,mpc5121-mscan";
-			cell-index = <0>;
 			interrupts = <12 0x8>;
 			interrupt-parent = < &ipic >;
 			reg = <0x1300 0x80>;
 		};
 
-		mscan@1380 {
+		can@1380 {
 			compatible = "fsl,mpc5121-mscan";
-			cell-index = <1>;
 			interrupts = <13 0x8>;
 			interrupt-parent = < &ipic >;
 			reg = <0x1380 0x80>;
@@ -205,17 +203,31 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <0>;
 			reg = <0x1700 0x20>;
 			interrupts = <9 0x8>;
 			interrupt-parent = < &ipic >;
+			fsl,preserve-clocking;
+
+			hwmon@4a {
+				compatible = "adi,ad7414";
+				reg = <0x4a>;
+			};
+
+			eeprom@50 {
+				compatible = "at,24c32";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t62";
+				reg = <0x68>;
+			};
 		};
 
 		i2c@1720 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <1>;
 			reg = <0x1720 0x20>;
 			interrupts = <10 0x8>;
 			interrupt-parent = < &ipic >;
@@ -225,7 +237,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			cell-index = <2>;
 			reg = <0x1740 0x20>;
 			interrupts = <11 0x8>;
 			interrupt-parent = < &ipic >;
@@ -244,7 +255,7 @@
 		};
 
 		display@2100 {
-			compatible = "fsl,mpc5121-diu", "fsl-diu";
+			compatible = "fsl,mpc5121-diu";
 			reg = <0x2100 0x100>;
 			interrupts = <64 0x8>;
 			interrupt-parent = < &ipic >;
@@ -277,28 +288,28 @@
 
 		// USB1 using external ULPI PHY
 		//usb@3000 {
-		//	compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+		//	compatible = "fsl,mpc5121-usb2-dr";
 		//	reg = <0x3000 0x1000>;
 		//	#address-cells = <1>;
 		//	#size-cells = <0>;
 		//	interrupt-parent = < &ipic >;
 		//	interrupts = <43 0x8>;
 		//	dr_mode = "otg";
 		//	phy_type = "ulpi";
-		//	port1;
 		//};
 
 		// USB0 using internal UTMI PHY
 		usb@4000 {
-			compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+			compatible = "fsl,mpc5121-usb2-dr";
 			reg = <0x4000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupt-parent = < &ipic >;
 			interrupts = <44 0x8>;
 			dr_mode = "otg";
 			phy_type = "utmi_wide";
-			port0;
+			fsl,invert-drvvbus;
+			fsl,invert-pwr-fault;
 		};
 
 		// IO control
@@ -365,7 +376,7 @@
 		};
 
 		dma@14000 {
-			compatible = "fsl,mpc5121-dma2";
+			compatible = "fsl,mpc5121-dma";
 			reg = <0x14000 0x1800>;
 			interrupts = <65 0x8>;
 			interrupt-parent = < &ipic >;