---

yaml --- r: 266124 b: refs/heads/master c: 46151ae h: refs/heads/master v: v3
git-mirror · Sep 20, 2011 · 88cc994 · 88cc994
1 parent 2e3644a
commit 88cc994
Show file tree

Hide file tree

Showing 330 changed files with 21,716 additions and 13,336 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 94362c7e49b2eccf9fe86112b8090939aa2f5355
+refs/heads/master: 46151ae81758f05086e17fd4e4da129afe100f93
diff --git a/trunk/Documentation/networking/ip-sysctl.txt b/trunk/Documentation/networking/ip-sysctl.txt
@@ -1045,6 +1045,11 @@ conf/interface/*:
 accept_ra - BOOLEAN
 	Accept Router Advertisements; autoconfigure using them.
 
+	It also determines whether or not to transmit Router
+	Solicitations. If and only if the functional setting is to
+	accept Router Advertisements, Router Solicitations will be
+	transmitted.
+
 	Possible values are:
 		0 Do not accept Router Advertisements.
 		1 Accept Router Advertisements if forwarding is disabled.
@@ -1115,14 +1120,14 @@ forwarding - BOOLEAN
 	Possible values are:
 		0 Forwarding disabled
 		1 Forwarding enabled
-		2 Forwarding enabled (Hybrid Mode)
 
 	FALSE (0):
 
 	By default, Host behaviour is assumed.  This means:
 
 	1. IsRouter flag is not set in Neighbour Advertisements.
-	2. Router Solicitations are being sent when necessary.
+	2. If accept_ra is TRUE (default), transmit Router
+	   Solicitations.
 	3. If accept_ra is TRUE (default), accept Router
 	   Advertisements (and do autoconfiguration).
 	4. If accept_redirects is TRUE (default), accept Redirects.
@@ -1133,16 +1138,10 @@ forwarding - BOOLEAN
 	This means exactly the reverse from the above:
 
 	1. IsRouter flag is set in Neighbour Advertisements.
-	2. Router Solicitations are not sent.
+	2. Router Solicitations are not sent unless accept_ra is 2.
 	3. Router Advertisements are ignored unless accept_ra is 2.
 	4. Redirects are ignored.
 
-	TRUE (2):
-
-	Hybrid mode. Same behaviour as TRUE, except for:
-
-	2. Router Solicitations are being sent when necessary.
-
 	Default: 0 (disabled) if global forwarding is disabled (default),
 		 otherwise 1 (enabled).
 

diff --git a/trunk/Documentation/networking/stmmac.txt b/trunk/Documentation/networking/stmmac.txt
@@ -235,7 +235,38 @@ reset procedure etc).
  o enh_desc.c: functions for handling enhanced descriptors
  o norm_desc.c: functions for handling normal descriptors
 
-5) TODO:
+5) Debug Information
+
+The driver exports many information i.e. internal statistics,
+debug information, MAC and DMA registers etc.
+
+These can be read in several ways depending on the
+type of the information actually needed.
+
+For example a user can be use the ethtool support
+to get statistics: e.g. using: ethtool -S ethX
+(that shows the Management counters (MMC) if supported)
+or sees the MAC/DMA registers: e.g. using: ethtool -d ethX
+
+Compiling the Kernel with CONFIG_DEBUG_FS and enabling the
+STMMAC_DEBUG_FS option the driver will export the following
+debugfs entries:
+
+/sys/kernel/debug/stmmaceth/descriptors_status
+  To show the DMA TX/RX descriptor rings
+
+Developer can also use the "debug" module parameter to get
+further debug information.
+
+In the end, there are other macros (that cannot be enabled
+via menuconfig) to turn-on the RX/TX DMA debugging,
+specific MAC core debug printk etc. Others to enable the
+debug in the TX and RX processes.
+All these are only useful during the developing stage
+and should never enabled inside the code for general usage.
+In fact, these can generate an huge amount of debug messages.
+
+6) TODO:
  o XGMAC is not supported.
  o Review the timer optimisation code to use an embedded device that will be
   available in new chip generations.
diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -1246,6 +1246,14 @@ W:	http://wireless.kernel.org/en/users/Drivers/ath5k
 S:	Maintained
 F:	drivers/net/wireless/ath/ath5k/
 
+ATHEROS ATH6KL WIRELESS DRIVER
+M:	Kalle Valo <kvalo@qca.qualcomm.com>
+L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org/en/users/Drivers/ath6kl
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath6kl.git
+S:	Supported
+F:	drivers/net/wireless/ath/ath6kl/
+
 ATHEROS ATH9K WIRELESS DRIVER
 M:	"Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
 M:	Jouni Malinen <jouni@qca.qualcomm.com>
@@ -6145,12 +6153,6 @@ M:	Jakub Schmidtke <sjakub@gmail.com>
 S:	Odd Fixes
 F:	drivers/staging/asus_oled/
 
-STAGING - ATHEROS ATH6KL WIRELESS DRIVER
-M:	Luis R. Rodriguez <mcgrof@gmail.com>
-M:	Naveen Singh <nsingh@atheros.com>
-S:	Odd Fixes
-F:	drivers/staging/ath6kl/
-
 STAGING - COMEDI
 M:	Ian Abbott <abbotti@mev.co.uk>
 M:	Mori Hess <fmhess@users.sourceforge.net>

diff --git a/trunk/arch/cris/arch-v10/drivers/Kconfig b/trunk/arch/cris/arch-v10/drivers/Kconfig
@@ -4,6 +4,7 @@ config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V10
 	select NET_ETHERNET
+	select NET_CORE
 	select MII
 	help
 	  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet

diff --git a/trunk/arch/cris/arch-v32/drivers/Kconfig b/trunk/arch/cris/arch-v32/drivers/Kconfig
@@ -4,6 +4,7 @@ config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V32
 	select NET_ETHERNET
+	select NET_CORE
 	select MII
 	help
 	  This option enables the ETRAX FS built-in 10/100Mbit Ethernet

diff --git a/trunk/arch/mips/txx9/generic/setup_tx4939.c b/trunk/arch/mips/txx9/generic/setup_tx4939.c
@@ -321,7 +321,7 @@ void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask)
 static u32 tx4939_get_eth_speed(struct net_device *dev)
 {
 	struct ethtool_cmd cmd;
-	if (dev_ethtool_get_settings(dev, &cmd))
+	if (__ethtool_get_settings(dev, &cmd))
 		return 100;	/* default 100Mbps */
 
 	return ethtool_cmd_speed(&cmd);

diff --git a/trunk/drivers/bcma/sprom.c b/trunk/drivers/bcma/sprom.c
@@ -133,6 +133,15 @@ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
 		v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
 		*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
 	}
+
+	bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)];
+
+	bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
+	bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
+	bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
+	bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
+
+	bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
 }
 
 int bcma_sprom_get(struct bcma_bus *bus)

diff --git a/trunk/drivers/net/bonding/bond_main.c b/trunk/drivers/net/bonding/bond_main.c
@@ -557,26 +557,23 @@ static int bond_set_carrier(struct bonding *bond)
 static int bond_update_speed_duplex(struct slave *slave)
 {
 	struct net_device *slave_dev = slave->dev;
-	struct ethtool_cmd etool = { .cmd = ETHTOOL_GSET };
+	struct ethtool_cmd ecmd;
 	u32 slave_speed;
 	int res;
 
 	/* Fake speed and duplex */
 	slave->speed = SPEED_100;
 	slave->duplex = DUPLEX_FULL;
 
-	if (!slave_dev->ethtool_ops || !slave_dev->ethtool_ops->get_settings)
-		return -1;
-
-	res = slave_dev->ethtool_ops->get_settings(slave_dev, &etool);
+	res = __ethtool_get_settings(slave_dev, &ecmd);
 	if (res < 0)
 		return -1;
 
-	slave_speed = ethtool_cmd_speed(&etool);
+	slave_speed = ethtool_cmd_speed(&ecmd);
 	if (slave_speed == 0 || slave_speed == ((__u32) -1))
 		return -1;
 
-	switch (etool.duplex) {
+	switch (ecmd.duplex) {
 	case DUPLEX_FULL:
 	case DUPLEX_HALF:
 		break;
@@ -585,7 +582,7 @@ static int bond_update_speed_duplex(struct slave *slave)
 	}
 
 	slave->speed = slave_speed;
-	slave->duplex = etool.duplex;
+	slave->duplex = ecmd.duplex;
 
 	return 0;
 }

diff --git a/trunk/drivers/net/ethernet/3com/Kconfig b/trunk/drivers/net/ethernet/3com/Kconfig
@@ -81,6 +81,7 @@ config PCMCIA_3C589
 config VORTEX
 	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
 	depends on (PCI || EISA)
+	select NET_CORE
 	select MII
 	---help---
 	  This option enables driver support for a large number of 10Mbps and

diff --git a/trunk/drivers/net/ethernet/Kconfig b/trunk/drivers/net/ethernet/Kconfig
@@ -62,6 +62,7 @@ config JME
 	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the PCI-Express gigabit ethernet adapters
@@ -102,6 +103,7 @@ config FEALNX
 	tristate "Myson MTD-8xx PCI Ethernet support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
@@ -112,6 +114,7 @@ source "drivers/net/ethernet/8390/Kconfig"
 
 config NET_NETX
 	tristate "NetX Ethernet support"
+	select NET_CORE
 	select MII
 	depends on ARCH_NETX
 	---help---
@@ -128,6 +131,7 @@ source "drivers/net/ethernet/oki-semi/Kconfig"
 config ETHOC
 	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
 	depends on HAS_IOMEM && HAS_DMA
+	select NET_CORE
 	select MII
 	select PHYLIB
 	select CRC32

diff --git a/trunk/drivers/net/ethernet/adaptec/Kconfig b/trunk/drivers/net/ethernet/adaptec/Kconfig
@@ -22,6 +22,7 @@ config ADAPTEC_STARFIRE
 	tristate "Adaptec Starfire/DuraLAN support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network

diff --git a/trunk/drivers/net/ethernet/adi/Kconfig b/trunk/drivers/net/ethernet/adi/Kconfig
@@ -23,6 +23,7 @@ config BFIN_MAC
 	tristate "Blackfin on-chip MAC support"
 	depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
 	select CRC32
+	select NET_CORE
 	select MII
 	select PHYLIB
 	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE

diff --git a/trunk/drivers/net/ethernet/amd/Kconfig b/trunk/drivers/net/ethernet/amd/Kconfig
@@ -34,6 +34,7 @@ config AMD8111_ETH
 	tristate "AMD 8111 (new PCI LANCE) support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  If you have an AMD 8111-based PCI LANCE ethernet card,
@@ -59,6 +60,7 @@ config PCNET32
 	tristate "AMD PCnet32 PCI support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,