staging/rts_pstor: remove braces {} in sd.c (reset_sd_card)

fixed below checkpatch warnings.
-WARNING: braces {} are not necessary for single statement blocks

Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rts_pstor/sd.c

@@ -2961,36 +2961,31 @@ int reset_sd_card(struct rtsx_chip *chip)
 	chip->capacity[chip->card2lun[SD_CARD]] = 0;
 
 	retval = enable_card_clock(chip, SD_CARD);
-	if (retval != STATUS_SUCCESS) {
+	if (retval != STATUS_SUCCESS)
 		TRACE_RET(chip, STATUS_FAIL);
-	}
 
 	if (chip->ignore_sd && CHK_SDIO_EXIST(chip) && !CHK_SDIO_IGNORED(chip)) {
 		if (chip->asic_code) {
 			retval = sd_pull_ctl_enable(chip);
-			if (retval != STATUS_SUCCESS) {
+			if (retval != STATUS_SUCCESS)
 				TRACE_RET(chip, STATUS_FAIL);
-			}
 		} else {
 			retval = rtsx_write_register(chip, FPGA_PULL_CTL,
 						     FPGA_SD_PULL_CTL_BIT | 0x20, 0);
-			if (retval != STATUS_SUCCESS) {
+			if (retval != STATUS_SUCCESS)
 				TRACE_RET(chip, STATUS_FAIL);
-			}
 		}
 		retval = card_share_mode(chip, SD_CARD);
-		if (retval != STATUS_SUCCESS) {
+		if (retval != STATUS_SUCCESS)
 			TRACE_RET(chip, STATUS_FAIL);
-		}
 
 		chip->sd_io = 1;
 		TRACE_RET(chip, STATUS_FAIL);
 	}
 
 	retval = sd_init_power(chip);
-	if (retval != STATUS_SUCCESS) {
+	if (retval != STATUS_SUCCESS)
 		TRACE_RET(chip, STATUS_FAIL);
-	}
 
 	if (chip->sd_ctl & RESET_MMC_FIRST) {
 		retval = reset_mmc(chip);
@@ -3029,18 +3024,17 @@ int reset_sd_card(struct rtsx_chip *chip)
 	}
 
 	retval = sd_set_clock_divider(chip, SD_CLK_DIVIDE_0);
-	if (retval != STATUS_SUCCESS) {
+	if (retval != STATUS_SUCCESS)
 		TRACE_RET(chip, STATUS_FAIL);
-	}
+
 	RTSX_WRITE_REG(chip, REG_SD_BYTE_CNT_L, 0xFF, 0);
 	RTSX_WRITE_REG(chip, REG_SD_BYTE_CNT_H, 0xFF, 2);
 
 	chip->capacity[chip->card2lun[SD_CARD]] = sd_card->capacity;
 
 	retval = sd_set_init_para(chip);
-	if (retval != STATUS_SUCCESS) {
+	if (retval != STATUS_SUCCESS)
 		TRACE_RET(chip, STATUS_FAIL);
-	}
 
 	RTSX_DEBUGP("sd_card->sd_type = 0x%x\n", sd_card->sd_type);