---

yaml
---
r: 272967
b: refs/heads/master
c: ccfa8b2
h: refs/heads/master
i:
  272965: aee2068
  272963: a65f006
  272959: 60c1198
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 7e0cac630c7c90f12a78131df9913657fa30243b
+refs/heads/master: ccfa8b21f20099b950b4f2f75d2330fb149a2012

trunk/arch/arm/Kconfig.debug

@@ -128,6 +128,111 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
+	config DEBUG_IMX1_UART
+		bool "i.MX1 Debug UART"
+		depends on SOC_IMX1
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX1.
+
+	config DEBUG_IMX23_UART
+		bool "i.MX23 Debug UART"
+		depends on SOC_IMX23
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX23.
+
+	config DEBUG_IMX25_UART
+		bool "i.MX25 Debug UART"
+		depends on SOC_IMX25
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX25.
+
+	config DEBUG_IMX21_IMX27_UART
+		bool "i.MX21 and i.MX27 Debug UART"
+		depends on SOC_IMX21 || SOC_IMX27
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX21 or i.MX27.
+
+	config DEBUG_IMX28_UART
+		bool "i.MX28 Debug UART"
+		depends on SOC_IMX28
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX28.
+
+	config DEBUG_IMX31_IMX35_UART
+		bool "i.MX31 and i.MX35 Debug UART"
+		depends on SOC_IMX31 || SOC_IMX35
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX31 or i.MX35.
+
+	config DEBUG_IMX51_UART
+		bool "i.MX51 Debug UART"
+		depends on SOC_IMX51
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX51.
+
+	config DEBUG_IMX50_IMX53_UART
+		bool "i.MX50 and i.MX53 Debug UART"
+		depends on SOC_IMX50 || SOC_IMX53
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX50 or i.MX53.
+
+	config DEBUG_S3C_UART0
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 0 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART1
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 1 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 1. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART2
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 2 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 2. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_REALVIEW_STD_PORT
+		bool "RealView Default UART"
+		depends on ARCH_REALVIEW
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on RealView EB, PB11MP, PBA8
+		  and PBX platforms.
+
+	config DEBUG_REALVIEW_PB1176_PORT
+		bool "RealView PB1176 UART"
+		depends on MACH_REALVIEW_PB1176
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the standard serial port on the RealView
+		  PB1176 platform.
+
 endchoice
 
 config EARLY_PRINTK
@@ -146,18 +251,6 @@ config OC_ETM
 	  buffer driver that will allow you to collect traces of the
 	  kernel code.
 
-config DEBUG_S3C_UART
-	depends on PLAT_SAMSUNG
-	int "S3C UART to use for low-level debug"
-	default "0"
-	help
-	  Choice for UART for kernel low-level using S3C UARTS,
-	  should be between zero and two. The port must have been
-	  initialised by the boot-loader before use.
-
-	  The uncompressor code port configuration is now handled
-	  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
 config ARM_KPROBES_TEST
 	tristate "Kprobes test module"
 	depends on KPROBES && MODULES

trunk/arch/arm/mach-mxs/include/mach/debug-macro.S

@@ -14,17 +14,9 @@
 #include <mach/mx23.h>
 #include <mach/mx28.h>
 
-#ifdef CONFIG_SOC_IMX23
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#ifdef CONFIG_DEBUG_IMX23_UART
 #define UART_PADDR	MX23_DUART_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX28_UART)
 #define UART_PADDR	MX28_DUART_BASE_ADDR
 #endif
 

trunk/arch/arm/mach-realview/include/mach/debug-macro.S

@@ -10,23 +10,10 @@
  * published by the Free Software Foundation.
  */
 
-#if defined(CONFIG_MACH_REALVIEW_EB) || \
-    defined(CONFIG_MACH_REALVIEW_PB11MP) || \
-    defined(CONFIG_MACH_REALVIEW_PBA8) || \
-    defined(CONFIG_MACH_REALVIEW_PBX)
-#ifndef DEBUG_LL_UART_OFFSET
+#ifdef CONFIG_DEBUG_REALVIEW_STD_PORT
 #define DEBUG_LL_UART_OFFSET	0x00009000
-#elif DEBUG_LL_UART_OFFSET != 0x00009000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
-#endif
-
-#ifdef CONFIG_MACH_REALVIEW_PB1176
-#ifndef DEBUG_LL_UART_OFFSET
+#elif defined(CONFIG_DEBUG_REALVIEW_PB1176_PORT)
 #define DEBUG_LL_UART_OFFSET	0x0010c000
-#elif DEBUG_LL_UART_OFFSET != 0x0010c000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
 #endif
 
 #ifndef DEBUG_LL_UART_OFFSET

trunk/arch/arm/plat-mxc/include/mach/debug-macro.S

@@ -12,43 +12,17 @@
  */
 #include <mach/hardware.h>
 
-#ifdef CONFIG_SOC_IMX1
+#ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	MX1_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX25
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	MX25_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
 #define UART_PADDR	MX2x_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
 #define UART_PADDR	MX3x_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX51_UART)
 #define UART_PADDR	MX51_UART1_BASE_ADDR
-#endif
-
-/* iMX50/53 have same addresses, but not iMX51 */
-#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
 #define UART_PADDR	MX53_UART1_BASE_ADDR
 #endif
 

trunk/arch/arm/plat-samsung/Kconfig

@@ -367,4 +367,11 @@ config SAMSUNG_PD
 	help
 	  Say Y here if you want to control Power Domain by Runtime PM.
 
+config DEBUG_S3C_UART
+	depends on PLAT_SAMSUNG
+	int
+	default "0" if DEBUG_S3C_UART0
+	default "1" if DEBUG_S3C_UART1
+	default "2" if DEBUG_S3C_UART2
+
 endif