Merge back earlier cpufreq material for 3.19-rc1.

Documentation/cpu-freq/intel-pstate.txt

@@ -1,17 +1,28 @@
 Intel P-state driver
 --------------------
 
-This driver implements a scaling driver with an internal governor for
-Intel Core processors.  The driver follows the same model as the
-Transmeta scaling driver (longrun.c) and implements the setpolicy()
-instead of target().  Scaling drivers that implement setpolicy() are
-assumed to implement internal governors by the cpufreq core. All the
-logic for selecting the current P state is contained within the
-driver; no external governor is used by the cpufreq core.
-
-Intel SandyBridge+ processors are supported.
-
-New sysfs files for controlling P state selection have been added to
+This driver provides an interface to control the P state selection for
+SandyBridge+ Intel processors.  The driver can operate two different
+modes based on the processor model legacy and Hardware P state (HWP)
+mode.
+
+In legacy mode the driver implements a scaling driver with an internal
+governor for Intel Core processors.  The driver follows the same model
+as the Transmeta scaling driver (longrun.c) and implements the
+setpolicy() instead of target().  Scaling drivers that implement
+setpolicy() are assumed to implement internal governors by the cpufreq
+core. All the logic for selecting the current P state is contained
+within the driver; no external governor is used by the cpufreq core.
+
+In HWP mode P state selection is implemented in the processor
+itself. The driver provides the interfaces between the cpufreq core and
+the processor to control P state selection based on user preferences
+and reporting frequency to the cpufreq core.  In this mode the
+internal governor code is disabled.
+
+In addtion to the interfaces provided by the cpufreq core for
+controlling frequency the driver provides sysfs files for
+controlling P state selection. These files have been added to
 /sys/devices/system/cpu/intel_pstate/
 
       max_perf_pct: limits the maximum P state that will be requested by
@@ -33,7 +44,9 @@ frequency is fiction for Intel Core processors. Even if the scaling
 driver selects a single P state the actual frequency the processor
 will run at is selected by the processor itself.
 
-New debugfs files have also been added to /sys/kernel/debug/pstate_snb/
+For legacy mode debugfs files have also been added to allow tuning of
+the internal governor algorythm. These files are located at
+/sys/kernel/debug/pstate_snb/ These files are NOT present in HWP mode.
 
       deadband
       d_gain_pct

Documentation/kernel-parameters.txt

@@ -1446,6 +1446,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		       disable
 		         Do not enable intel_pstate as the default
 		         scaling driver for the supported processors
+		       no_hwp
+		         Do not enable hardware P state control (HWP)
+			 if available.
 
 	intremap=	[X86-64, Intel-IOMMU]
 			on	enable Interrupt Remapping (default)

arch/x86/include/asm/cpufeature.h

@@ -189,6 +189,11 @@
 #define X86_FEATURE_DTHERM	( 7*32+ 7) /* Digital Thermal Sensor */
 #define X86_FEATURE_HW_PSTATE	( 7*32+ 8) /* AMD HW-PState */
 #define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */
+#define X86_FEATURE_HWP		( 7*32+ 10) /* "hwp" Intel HWP */
+#define X86_FEATURE_HWP_NOITFY	( 7*32+ 11) /* Intel HWP_NOTIFY */
+#define X86_FEATURE_HWP_ACT_WINDOW ( 7*32+ 12) /* Intel HWP_ACT_WINDOW */
+#define X86_FEATURE_HWP_EPP	( 7*32+13) /* Intel HWP_EPP */
+#define X86_FEATURE_HWP_PKG_REQ ( 7*32+14) /* Intel HWP_PKG_REQ */
 
 /* Virtualization flags: Linux defined, word 8 */
 #define X86_FEATURE_TPR_SHADOW  ( 8*32+ 0) /* Intel TPR Shadow */

arch/x86/include/uapi/asm/msr-index.h

@@ -152,6 +152,45 @@
 #define MSR_CC6_DEMOTION_POLICY_CONFIG	0x00000668
 #define MSR_MC6_DEMOTION_POLICY_CONFIG	0x00000669
 
+/* Hardware P state interface */
+#define MSR_PPERF			0x0000064e
+#define MSR_PERF_LIMIT_REASONS		0x0000064f
+#define MSR_PM_ENABLE			0x00000770
+#define MSR_HWP_CAPABILITIES		0x00000771
+#define MSR_HWP_REQUEST_PKG		0x00000772
+#define MSR_HWP_INTERRUPT		0x00000773
+#define MSR_HWP_REQUEST 		0x00000774
+#define MSR_HWP_STATUS			0x00000777
+
+/* CPUID.6.EAX */
+#define HWP_BASE_BIT			(1<<7)
+#define HWP_NOTIFICATIONS_BIT		(1<<8)
+#define HWP_ACTIVITY_WINDOW_BIT		(1<<9)
+#define HWP_ENERGY_PERF_PREFERENCE_BIT	(1<<10)
+#define HWP_PACKAGE_LEVEL_REQUEST_BIT	(1<<11)
+
+/* IA32_HWP_CAPABILITIES */
+#define HWP_HIGHEST_PERF(x)		(x & 0xff)
+#define HWP_GUARANTEED_PERF(x)		((x & (0xff << 8)) >>8)
+#define HWP_MOSTEFFICIENT_PERF(x)	((x & (0xff << 16)) >>16)
+#define HWP_LOWEST_PERF(x)		((x & (0xff << 24)) >>24)
+
+/* IA32_HWP_REQUEST */
+#define HWP_MIN_PERF(x) 		(x & 0xff)
+#define HWP_MAX_PERF(x) 		((x & 0xff) << 8)
+#define HWP_DESIRED_PERF(x)		((x & 0xff) << 16)
+#define HWP_ENERGY_PERF_PREFERENCE(x)	((x & 0xff) << 24)
+#define HWP_ACTIVITY_WINDOW(x)		((x & 0xff3) << 32)
+#define HWP_PACKAGE_CONTROL(x)		((x & 0x1) << 42)
+
+/* IA32_HWP_STATUS */
+#define HWP_GUARANTEED_CHANGE(x)	(x & 0x1)
+#define HWP_EXCURSION_TO_MINIMUM(x)	(x & 0x4)
+
+/* IA32_HWP_INTERRUPT */
+#define HWP_CHANGE_TO_GUARANTEED_INT(x)	(x & 0x1)
+#define HWP_EXCURSION_TO_MINIMUM_INT(x)	(x & 0x2)
+
 #define MSR_AMD64_MC0_MASK		0xc0010044
 
 #define MSR_IA32_MCx_CTL(x)		(MSR_IA32_MC0_CTL + 4*(x))
@@ -345,6 +384,8 @@
 
 #define MSR_IA32_TEMPERATURE_TARGET	0x000001a2
 
+#define MSR_MISC_PWR_MGMT		0x000001aa
+
 #define MSR_IA32_ENERGY_PERF_BIAS	0x000001b0
 #define ENERGY_PERF_BIAS_PERFORMANCE	0
 #define ENERGY_PERF_BIAS_NORMAL		6

arch/x86/kernel/cpu/scattered.c

@@ -36,6 +36,11 @@ void init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 		{ X86_FEATURE_ARAT,		CR_EAX, 2, 0x00000006, 0 },
 		{ X86_FEATURE_PLN,		CR_EAX, 4, 0x00000006, 0 },
 		{ X86_FEATURE_PTS,		CR_EAX, 6, 0x00000006, 0 },
+		{ X86_FEATURE_HWP,		CR_EAX, 7, 0x00000006, 0 },
+		{ X86_FEATURE_HWP_NOITFY,	CR_EAX, 8, 0x00000006, 0 },
+		{ X86_FEATURE_HWP_ACT_WINDOW,	CR_EAX, 9, 0x00000006, 0 },
+		{ X86_FEATURE_HWP_EPP,		CR_EAX,10, 0x00000006, 0 },
+		{ X86_FEATURE_HWP_PKG_REQ,	CR_EAX,11, 0x00000006, 0 },
 		{ X86_FEATURE_APERFMPERF,	CR_ECX, 0, 0x00000006, 0 },
 		{ X86_FEATURE_EPB,		CR_ECX, 3, 0x00000006, 0 },
 		{ X86_FEATURE_HW_PSTATE,	CR_EDX, 7, 0x80000007, 0 },

drivers/cpufreq/Kconfig

@@ -63,7 +63,6 @@ config CPU_FREQ_DEFAULT_GOV_PERFORMANCE
 
 config CPU_FREQ_DEFAULT_GOV_POWERSAVE
 	bool "powersave"
-	depends on EXPERT
 	select CPU_FREQ_GOV_POWERSAVE
 	help
 	  Use the CPUFreq governor 'powersave' as default. This sets
@@ -183,6 +182,8 @@ config CPU_FREQ_GOV_CONSERVATIVE
 
 	  If in doubt, say N.
 
+comment "CPU frequency scaling drivers"
+
 config CPUFREQ_DT
 	tristate "Generic DT based cpufreq driver"
 	depends on HAVE_CLK && OF
@@ -196,32 +197,29 @@ config CPUFREQ_DT
 
 	  If in doubt, say N.
 
-menu "x86 CPU frequency scaling drivers"
-depends on X86
+if X86
 source "drivers/cpufreq/Kconfig.x86"
-endmenu
+endif
 
-menu "ARM CPU frequency scaling drivers"
-depends on ARM || ARM64
+if ARM || ARM64
 source "drivers/cpufreq/Kconfig.arm"
-endmenu
+endif
 
-menu "AVR32 CPU frequency scaling drivers"
-depends on AVR32
+if PPC32 || PPC64
+source "drivers/cpufreq/Kconfig.powerpc"
+endif
 
+if AVR32
 config AVR32_AT32AP_CPUFREQ
 	bool "CPU frequency driver for AT32AP"
 	depends on PLATFORM_AT32AP
 	default n
 	help
 	  This enables the CPU frequency driver for AT32AP processors.
 	  If in doubt, say N.
+endif
 
-endmenu
-
-menu "CPUFreq processor drivers"
-depends on IA64
-
+if IA64
 config IA64_ACPI_CPUFREQ
 	tristate "ACPI Processor P-States driver"
 	depends on ACPI_PROCESSOR
@@ -232,12 +230,9 @@ config IA64_ACPI_CPUFREQ
 	For details, take a look at <file:Documentation/cpu-freq/>.
 
 	If in doubt, say N.
+endif
 
-endmenu
-
-menu "MIPS CPUFreq processor drivers"
-depends on MIPS
-
+if MIPS
 config LOONGSON2_CPUFREQ
 	tristate "Loongson2 CPUFreq Driver"
 	help
@@ -250,15 +245,18 @@ config LOONGSON2_CPUFREQ
 
 	  If in doubt, say N.
 
-endmenu
+config LOONGSON1_CPUFREQ
+	tristate "Loongson1 CPUFreq Driver"
+	help
+	  This option adds a CPUFreq driver for loongson1 processors which
+	  support software configurable cpu frequency.
 
-menu "PowerPC CPU frequency scaling drivers"
-depends on PPC32 || PPC64
-source "drivers/cpufreq/Kconfig.powerpc"
-endmenu
+	  For details, take a look at <file:Documentation/cpu-freq/>.
 
-menu "SPARC CPU frequency scaling drivers"
-depends on SPARC64
+	  If in doubt, say N.
+endif
+
+if SPARC64
 config SPARC_US3_CPUFREQ
 	tristate "UltraSPARC-III CPU Frequency driver"
 	help
@@ -276,10 +274,9 @@ config SPARC_US2E_CPUFREQ
 	  For details, take a look at <file:Documentation/cpu-freq>.
 
 	  If in doubt, say N.
-endmenu
+endif
 
-menu "SH CPU Frequency scaling"
-depends on SUPERH
+if SUPERH
 config SH_CPU_FREQ
 	tristate "SuperH CPU Frequency driver"
 	help
@@ -293,7 +290,7 @@ config SH_CPU_FREQ
 	  For details, take a look at <file:Documentation/cpu-freq>.
 
 	  If unsure, say N.
-endmenu
+endif
 
 endif
 endmenu

drivers/cpufreq/Kconfig.arm

@@ -247,3 +247,11 @@ config ARM_TEGRA_CPUFREQ
 	default y
 	help
 	  This adds the CPUFreq driver support for TEGRA SOCs.
+
+config ARM_PXA2xx_CPUFREQ
+	tristate "Intel PXA2xx CPUfreq driver"
+	depends on PXA27x || PXA25x
+	help
+	  This add the CPUFreq driver support for Intel PXA2xx SOCs.
+
+	  If in doubt, say N.

drivers/cpufreq/Makefile

@@ -61,8 +61,7 @@ obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_INTEGRATOR)		+= integrator-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
-obj-$(CONFIG_PXA25x)			+= pxa2xx-cpufreq.o
-obj-$(CONFIG_PXA27x)			+= pxa2xx-cpufreq.o
+obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
 obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
 obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
@@ -98,6 +97,7 @@ obj-$(CONFIG_CRIS_MACH_ARTPEC3)		+= cris-artpec3-cpufreq.o
 obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
 obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
+obj-$(CONFIG_LOONGSON1_CPUFREQ)		+= ls1x-cpufreq.o
 obj-$(CONFIG_SH_CPU_FREQ)		+= sh-cpufreq.o
 obj-$(CONFIG_SPARC_US2E_CPUFREQ)	+= sparc-us2e-cpufreq.o
 obj-$(CONFIG_SPARC_US3_CPUFREQ)		+= sparc-us3-cpufreq.o