---

yaml
---
r: 143720
b: refs/heads/master
c: d523b0c
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1e2ae4ddd373af6fa3ea2483d7fc4a08c7f54395
+refs/heads/master: d523b0c808a5c5cbde9ac89427d98ee6288f5f2f

trunk/Documentation/driver-model/platform.txt

@@ -169,62 +169,3 @@ three different ways to find such a match:
       be probed later if another device registers.  (Which is OK, since
       this interface is only for use with non-hotpluggable devices.)
 
-
-Early Platform Devices and Drivers
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The early platform interfaces provide platform data to platform device
-drivers early on during the system boot. The code is built on top of the
-early_param() command line parsing and can be executed very early on.
-
-Example: "earlyprintk" class early serial console in 6 steps
-
-1. Registering early platform device data
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The architecture code registers platform device data using the function
-early_platform_add_devices(). In the case of early serial console this
-should be hardware configuration for the serial port. Devices registered
-at this point will later on be matched against early platform drivers.
-
-2. Parsing kernel command line
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The architecture code calls parse_early_param() to parse the kernel
-command line. This will execute all matching early_param() callbacks.
-User specified early platform devices will be registered at this point.
-For the early serial console case the user can specify port on the
-kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
-the class string, "serial" is the name of the platfrom driver and
-0 is the platform device id. If the id is -1 then the dot and the
-id can be omitted.
-
-3. Installing early platform drivers belonging to a certain class
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The architecture code may optionally force registration of all early
-platform drivers belonging to a certain class using the function
-early_platform_driver_register_all(). User specified devices from
-step 2 have priority over these. This step is omitted by the serial
-driver example since the early serial driver code should be disabled
-unless the user has specified port on the kernel command line.
-
-4. Early platform driver registration
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Compiled-in platform drivers making use of early_platform_init() are
-automatically registered during step 2 or 3. The serial driver example
-should use early_platform_init("earlyprintk", &platform_driver).
-
-5. Probing of early platform drivers belonging to a certain class
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The architecture code calls early_platform_driver_probe() to match
-registered early platform devices associated with a certain class with
-registered early platform drivers. Matched devices will get probed().
-This step can be executed at any point during the early boot. As soon
-as possible may be good for the serial port case.
-
-6. Inside the early platform driver probe()
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The driver code needs to take special care during early boot, especially
-when it comes to memory allocation and interrupt registration. The code
-in the probe() function can use is_early_platform_device() to check if
-it is called at early platform device or at the regular platform device
-time. The early serial driver performs register_console() at this point.
-
-For further information, see <linux/platform_device.h>.

trunk/Documentation/filesystems/pohmelfs/design_notes.txt

@@ -56,10 +56,9 @@ workloads and can fully utilize the bandwidth to the servers when doing bulk
 data transfers.
 
 POHMELFS clients operate with a working set of servers and are capable of balancing read-only
-operations (like lookups or directory listings) between them according to IO priorities.
+operations (like lookups or directory listings) between them.
 Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
-with write permission turned on. IO priority and permissions can be changed in run-time.
+in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers.
 
 POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
 One can select any kernel supported cipher, encryption mode, hash type and operation mode

trunk/Documentation/filesystems/pohmelfs/info.txt

@@ -1,8 +1,6 @@
 POHMELFS usage information.
 
-Mount options.
-All but index, number of crypto threads and maximum IO size can changed via remount.
-
+Mount options:
 idx=%u
  Each mountpoint is associated with a special index via this option.
  Administrator can add or remove servers from the given index, so all mounts,
@@ -54,27 +52,16 @@ mcache_timeout=%u
 
 Usage examples.
 
-Add server server1.net:1025 into the working set with index $idx
+Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx
 with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
-$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
+$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
 
 Mount filesystem with given index $idx to /mnt mountpoint.
 Client will connect to all servers specified in the working set via previous command:
 mount -t pohmel -o idx=$idx q /mnt
 
-Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw):
-$cfg A modify -a server1.net -p 1025 -i $idx -I 1
-
-Change IO priority to 123 (node with the highest priority gets read requests).
-$cfg A modify -a server1.net -p 1025 -i $idx -P 123
+One can add or remove servers from working set after mounting too.
 
-One can check currect status of all connections in the mountstats file:
-# cat /proc/$PID/mountstats
-...
-device none mounted on /mnt with fstype pohmel
-idx addr(:port) socket_type protocol active priority permissions
-0 server1.net:1026 1 6 1 250 1
-0 server2.net:1025 1 6 1 123 3
 
 Server installation.
 

trunk/Documentation/kernel-parameters.txt

@@ -134,7 +134,7 @@ and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
 
-	acpi=		[HW,ACPI,X86]
+	acpi=		[HW,ACPI,X86-64,i386]
 			Advanced Configuration and Power Interface
 			Format: { force | off | ht | strict | noirq | rsdt }
 			force -- enable ACPI if default was off
@@ -218,7 +218,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			acpi_osi="!string2"	# remove built-in string2
 			acpi_osi=		# disable all strings
 
-	acpi_pm_good	[X86]
+	acpi_pm_good	[X86-32,X86-64]
 			Override the pmtimer bug detection: force the kernel
 			to assume that this machine's pmtimer latches its value
 			and always returns good values.
@@ -231,35 +231,6 @@ and is between 256 and 4096 characters. It is defined in the file
  			power state again in power transition.
  			1 : disable the power state check
 
-	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
-			Format: { level | edge | high | low }
-
-	acpi_serialize	[HW,ACPI] force serialization of AML methods
-
-	acpi_skip_timer_override [HW,ACPI]
-			Recognize and ignore IRQ0/pin2 Interrupt Override.
-			For broken nForce2 BIOS resulting in XT-PIC timer.
-
-	acpi_sleep=	[HW,ACPI] Sleep options
-			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
-				  old_ordering, s4_nonvs }
-			See Documentation/power/video.txt for information on
-			s3_bios and s3_mode.
-			s3_beep is for debugging; it makes the PC's speaker beep
-			as soon as the kernel's real-mode entry point is called.
-			s4_nohwsig prevents ACPI hardware signature from being
-			used during resume from hibernation.
-			old_ordering causes the ACPI 1.0 ordering of the _PTS
-			control method, with respect to putting devices into
-			low power states, to be enforced (the ACPI 2.0 ordering
-			of _PTS is used by default).
-			s4_nonvs prevents the kernel from saving/restoring the
-			ACPI NVS memory during hibernation.
-
-	acpi_use_timer_override [HW,ACPI]
-			Use timer override. For some broken Nvidia NF5 boards
-			that require a timer override, but don't have HPET
-
 	acpi_enforce_resources=	[ACPI]
 			{ strict | lax | no }
 			Check for resource conflicts between native drivers
@@ -279,9 +250,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	ad1848=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>,<type>
 
-	add_efi_memmap	[EFI; X86] Include EFI memory map in
-			kernel's map of available physical RAM.
-
 	advansys=	[HW,SCSI]
 			See header of drivers/scsi/advansys.c.
 
@@ -491,7 +459,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			Also note the kernel might malfunction if you disable
 			some critical bits.
 
-	code_bytes	[X86] How many bytes of object code to print
+	code_bytes	[IA32/X86_64] How many bytes of object code to print
 			in an oops report.
 			Range: 0 - 8192
 			Default: 64
@@ -624,7 +592,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			MTRR settings.  This parameter disables that behavior,
 			possibly causing your machine to run very slowly.
 
-	disable_timer_pin_1 [X86]
+	disable_timer_pin_1 [i386,x86-64]
 			Disable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs.
 
@@ -656,7 +624,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			UART at the specified I/O port or MMIO address.
 			The options are the same as for ttyS, above.
 
-	earlyprintk=	[X86,SH,BLACKFIN]
+	earlyprintk=	[X86-32,X86-64,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=dbgp
@@ -691,7 +659,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/block/as-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 
-	elfcorehdr=	[IA64,PPC,SH,X86]
+	elfcorehdr=	[IA64,PPC,SH,X86-32,X86_64]
 			Specifies physical address of start of kernel core
 			image elf header. Generally kexec loader will
 			pass this option to capture kernel.
@@ -970,7 +938,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See comment before marvel_specify_io7 in
 			arch/alpha/kernel/core_marvel.c.
 
-	io_delay=	[X86] I/O delay method
+	io_delay=	[X86-32,X86-64] I/O delay method
 		0x80
 			Standard port 0x80 based delay
 		0xed
@@ -1032,7 +1000,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	keepinitrd	[HW,ARM]
 
-	kernelcore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
+	kernelcore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
 			specifies the amount of memory usable by the kernel
 			for non-movable allocations.  The requested amount is
 			spread evenly throughout all nodes in the system. The
@@ -1066,7 +1034,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
 
-	kstack=N	[X86] Print N words from the kernel stack
+	kstack=N	[X86-32,X86-64] Print N words from the kernel stack
 			in oops dumps.
 
 	l2cr=		[PPC]
@@ -1076,7 +1044,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	lapic		[X86-32,APIC] Enable the local APIC even if BIOS
 			disabled it.
 
-	lapic_timer_c2_ok	[X86,APIC] trust the local apic timer
+	lapic_timer_c2_ok	[X86-32,x86-64,APIC] trust the local apic timer
 			in C2 power state.
 
 	libata.dma=	[LIBATA] DMA control
@@ -1261,7 +1229,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			[KNL,SH] Allow user to override the default size for
 			per-device physically contiguous DMA buffers.
 
-	memmap=exactmap	[KNL,X86] Enable setting of an exact
+	memmap=exactmap	[KNL,X86-32,X86_64] Enable setting of an exact
 			E820 memory map, as specified by the user.
 			Such memmap=exactmap lines can be constructed based on
 			BIOS output or other requirements. See the memmap=nn@ss
@@ -1352,7 +1320,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	mousedev.yres=	[MOUSE] Vertical screen resolution, used for devices
 			reporting absolute coordinates, such as tablets
 
-	movablecore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
+	movablecore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
 			is similar to kernelcore except it specifies the
 			amount of memory used for migratable allocations.
 			If both kernelcore and movablecore is specified,
@@ -1454,7 +1422,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]
 
-	nmi_watchdog=	[KNL,BUGS=X86] Debugging features for SMP kernels
+	nmi_watchdog=	[KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
 			Format: [panic,][num]
 			Valid num: 0,1,2
 			0 - turn nmi_watchdog off
@@ -1507,11 +1475,11 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nodsp		[SH] Disable hardware DSP at boot time.
 
-	noefi		[X86] Disable EFI runtime services support.
+	noefi		[X86-32,X86-64] Disable EFI runtime services support.
 
 	noexec		[IA-64]
 
-	noexec		[X86]
+	noexec		[X86-32,X86-64]
 			On X86-32 available only on PAE configured kernels.
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
@@ -1557,7 +1525,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	noirqdebug	[X86-32] Disables the code which attempts to detect and
 			disable unhandled interrupt sources.
 
-	no_timer_check	[X86,APIC] Disables the code which tests for
+	no_timer_check	[X86-32,X86_64,APIC] Disables the code which tests for
 			broken timer IRQ sources.
 
 	noisapnp	[ISAPNP] Disables ISA PnP code.
@@ -1721,7 +1689,7 @@ and is between 256 and 4096 characters. It is defined in the file
 				disable the use of PCIE advanced error reporting.
 		nodomains	[PCI] Disable support for multiple PCI
 				root domains (aka PCI segments, in ACPI-speak).
-		nommconf	[X86] Disable use of MMCONFIG for PCI
+		nommconf	[X86-32,X86_64] Disable use of MMCONFIG for PCI
 				Configuration
 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
 				enabled, this kernel boot option can be used to
@@ -1870,12 +1838,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			autoconfiguration.
 			Ranges are in pairs (memory base and size).
 
-	ports=		[IP_VS_FTP] IPVS ftp helper module
-			Default is 21.
-			Up to 8 (IP_VS_APP_MAX_PORTS) ports
-			may be specified.
-			Format: <port>,<port>....
-
 	print-fatal-signals=
 			[KNL] debug: print fatal signals
 			print-fatal-signals=1: print segfault info to
@@ -2418,7 +2380,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			reported either.
 
 	unknown_nmi_panic
-			[X86]
+			[X86-32,X86-64]
 			Set unknown_nmi_panic=1 early on boot.
 
 	usbcore.autosuspend=
@@ -2485,12 +2447,12 @@ and is between 256 and 4096 characters. It is defined in the file
 					medium is write-protected).
 			Example: quirks=0419:aaf5:rl,0421:0433:rc
 
-	vdso=		[X86,SH]
+	vdso=		[X86-32,SH,x86-64]
 			vdso=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso=1: enable VDSO (default)
 			vdso=0: disable VDSO mapping
 
-	vdso32=		[X86]
+	vdso32=		[X86-32,X86-64]
 			vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso32=1: enable 32-bit VDSO (default)
 			vdso32=0: disable 32-bit VDSO mapping

trunk/Documentation/networking/bonding.txt

@@ -1242,7 +1242,7 @@ monitoring is enabled, and vice-versa.
 To add ARP targets:
 # echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
 # echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target
-	NOTE:  up to 16 target addresses may be specified.
+	NOTE:  up to 10 target addresses may be specified.
 
 To remove an ARP target:
 # echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target