---

yaml --- r: 172103 b: refs/heads/master c: e004840 h: refs/heads/master i: 172101: 7eb41db 172099: 9d21901 172095: d437cf0 v: v3
git-mirror · Dec 3, 2009 · 8be2e9d · 8be2e9d
1 parent 5c8cc11
commit 8be2e9d
Show file tree

Hide file tree

Showing 1,285 changed files with 107,106 additions and 66,953 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1f5865e73fb18834f52bd6e1d27bce86ff372089
+refs/heads/master: e00484023ebe94dce03fdd1270edf3e191c2bc79
diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt
@@ -302,18 +302,6 @@ Who:	ocfs2-devel@oss.oracle.com
 
 ---------------------------
 
-What:	SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
-	SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
-When: 	June 2009
-Why:    A newer version of the options have been introduced in 2005 that
-	removes the limitions of the old API.  The sctp library has been
-        converted to use these new options at the same time.  Any user
-	space app that directly uses the old options should convert to using
-	the new options.
-Who:	Vlad Yasevich <vladislav.yasevich@hp.com>
-
----------------------------
-
 What:	Ability for non root users to shm_get hugetlb pages based on mlock
 	resource limits
 When:	2.6.31

diff --git a/trunk/Documentation/isdn/README.gigaset b/trunk/Documentation/isdn/README.gigaset
@@ -5,7 +5,7 @@ GigaSet 307x Device Driver
      ------------
 1.1. Hardware
      --------
-     This release supports the connection of the Gigaset 307x/417x family of
+     This driver supports the connection of the Gigaset 307x/417x family of
      ISDN DECT bases via Gigaset M101 Data, Gigaset M105 Data or direct USB
      connection. The following devices are reported to be compatible:
 
@@ -33,7 +33,7 @@ GigaSet 307x Device Driver
               http://gigaset307x.sourceforge.net/
 
      We had also reports from users of Gigaset M105 who could use the drivers
-     with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.4.)
+     with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.5.)
      If you have another device that works with our driver, please let us know.
 
      Chances of getting an USB device to work are good if the output of
@@ -49,7 +49,7 @@ GigaSet 307x Device Driver
      --------
      The driver works with ISDN4linux and so can be used with any software
      which is able to use ISDN4linux for ISDN connections (voice or data).
-     CAPI4Linux support is planned but not yet available.
+     Experimental Kernel CAPI support is available as a compilation option.
 
      There are some user space tools available at
      http://sourceforge.net/projects/gigaset307x/
@@ -102,20 +102,28 @@ GigaSet 307x Device Driver
 2.3. ISDN4linux
      ----------
      This is the "normal" mode of operation. After loading the module you can
-     set up the ISDN system just as you'd do with any ISDN card.
-     Your distribution should provide some configuration utility.
-     If not, you can use some HOWTOs like
+     set up the ISDN system just as you'd do with any ISDN card supported by
+     the ISDN4Linux subsystem. Most distributions provide some configuration
+     utility. If not, you can use some HOWTOs like
          http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
-     If this doesn't work, because you have some recent device like SX100 where
+     If this doesn't work, because you have some device like SX100 where
      debug output (see section 3.2.) shows something like this when dialing
          CMD Received: ERROR
          Available Params: 0
          Connection State: 0, Response: -1
          gigaset_process_response: resp_code -1 in ConState 0 !
          Timeout occurred
-     you might need to use unimodem mode:
+     you might need to use unimodem mode. (see section 2.5.)
 
-2.4. Unimodem mode
+2.4. CAPI
+     ----
+     If the driver is compiled with CAPI support (kernel configuration option
+     GIGASET_CAPI, experimental) it can also be used with CAPI 2.0 kernel and
+     user space applications.  ISDN4Linux is supported in this configuration
+     via the capidrv compatibility driver. The kernel module capidrv.ko must
+     be loaded explicitly ("modprobe capidrv") if needed.
+
+2.5. Unimodem mode
      -------------
      This is needed for some devices [e.g. SX100] as they have problems with
      the "normal" commands.
@@ -160,7 +168,7 @@ GigaSet 307x Device Driver
      configuration file like /etc/modprobe.conf.local,
      using that should be preferred.
 
-2.5. Call-ID (CID) mode
+2.6. Call-ID (CID) mode
      ------------------
      Call-IDs are numbers used to tag commands to, and responses from, the
      Gigaset base in order to support the simultaneous handling of multiple
@@ -188,7 +196,7 @@ GigaSet 307x Device Driver
      You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode
      setting (ttyGxy is ttyGU0 or ttyGB0).
 
-2.6. Unregistered Wireless Devices (M101/M105)
+2.7. Unregistered Wireless Devices (M101/M105)
      -----------------------------------------
      The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
      the M101 and M105 wireless devices to be used as ISDN devices for ISDN
@@ -228,15 +236,15 @@ GigaSet 307x Device Driver
         You have two or more DECT data adapters (M101/M105) and only the
         first one you turn on works.
      Solution:
-        Select Unimodem mode for all DECT data adapters. (see section 2.4.)
+        Select Unimodem mode for all DECT data adapters. (see section 2.5.)
 
      Problem:
 	Messages like this:
 	    usb_gigaset 3-2:1.0: Could not initialize the device.
 	appear in your syslog.
      Solution:
 	Check whether your M10x wireless device is correctly registered to the
-	Gigaset base. (see section 2.6.)
+	Gigaset base. (see section 2.7.)
 
 3.2. Telling the driver to provide more information
      ----------------------------------------------

diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
@@ -2590,6 +2590,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	uart6850=	[HW,OSS]
 			Format: <io>,<irq>
 
+	uhash_entries=	[KNL,NET]
+			Set number of hash buckets for UDP/UDP-Lite connections
+
 	uhci-hcd.ignore_oc=
 			[USB] Ignore overcurrent events (default N).
 			Some badly-designed motherboards generate lots of

diff --git a/trunk/Documentation/networking/bonding.txt b/trunk/Documentation/networking/bonding.txt
@@ -1,7 +1,7 @@
 
 		Linux Ethernet Bonding Driver HOWTO
 
-		Latest update: 12 November 2007
+		Latest update: 23 September 2009
 
 Initial release : Thomas Davis <tadavis at lbl.gov>
 Corrections, HA extensions : 2000/10/03-15 :
@@ -614,6 +614,46 @@ primary
 
 	The primary option is only valid for active-backup mode.
 
+primary_reselect
+
+	Specifies the reselection policy for the primary slave.  This
+	affects how the primary slave is chosen to become the active slave
+	when failure of the active slave or recovery of the primary slave
+	occurs.  This option is designed to prevent flip-flopping between
+	the primary slave and other slaves.  Possible values are:
+
+	always or 0 (default)
+
+		The primary slave becomes the active slave whenever it
+		comes back up.
+
+	better or 1
+
+		The primary slave becomes the active slave when it comes
+		back up, if the speed and duplex of the primary slave is
+		better than the speed and duplex of the current active
+		slave.
+
+	failure or 2
+
+		The primary slave becomes the active slave only if the
+		current active slave fails and the primary slave is up.
+
+	The primary_reselect setting is ignored in two cases:
+
+		If no slaves are active, the first slave to recover is
+		made the active slave.
+
+		When initially enslaved, the primary slave is always made
+		the active slave.
+
+	Changing the primary_reselect policy via sysfs will cause an
+	immediate selection of the best active slave according to the new
+	policy.  This may or may not result in a change of the active
+	slave, depending upon the circumstances.
+
+	This option was added for bonding version 3.6.0.
+
 updelay
 
 	Specifies the time, in milliseconds, to wait before enabling a

diff --git a/trunk/Documentation/networking/ip-sysctl.txt b/trunk/Documentation/networking/ip-sysctl.txt
@@ -1086,6 +1086,24 @@ accept_dad - INTEGER
 	2: Enable DAD, and disable IPv6 operation if MAC-based duplicate
 	   link-local address has been found.
 
+force_tllao - BOOLEAN
+	Enable sending the target link-layer address option even when
+	responding to a unicast neighbor solicitation.
+	Default: FALSE
+
+	Quoting from RFC 2461, section 4.4, Target link-layer address:
+
+	"The option MUST be included for multicast solicitations in order to
+	avoid infinite Neighbor Solicitation "recursion" when the peer node
+	does not have a cache entry to return a Neighbor Advertisements
+	message.  When responding to unicast solicitations, the option can be
+	omitted since the sender of the solicitation has the correct link-
+	layer address; otherwise it would not have be able to send the unicast
+	solicitation in the first place. However, including the link-layer
+	address in this case adds little overhead and eliminates a potential
+	race condition where the sender deletes the cached link-layer address
+	prior to receiving a response to a previous solicitation."
+
 icmp/*:
 ratelimit - INTEGER
 	Limit the maximal rates for sending ICMPv6 packets.

diff --git a/trunk/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/trunk/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -178,3 +178,13 @@ External interrupts:
 	external irq3:	interrupts = <1 3 n>;
 'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low)
 
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properites, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source- a string describing the clock source. Valid values
+			  are:	"ip" for ip bus clock
+				"ref" for reference clock (XTAL)
+			  "ref" is default in case this property is not
+			  present.
diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -1120,7 +1120,6 @@ F:	include/net/ax25.h
 F:	net/ax25/
 
 B43 WIRELESS DRIVER
-M:	Michael Buesch <mb@bu3sch.de>
 M:	Stefano Brivio <stefano.brivio@polimi.it>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/users/Drivers/b43
@@ -3744,9 +3743,9 @@ F:	include/linux/if_*
 F:	include/linux/*device.h
 
 NETXEN (1/10) GbE SUPPORT
-M:	Dhananjay Phadke <dhananjay@netxen.com>
+M:	Amit Kumar Salecha <amit.salecha@qlogic.com>
 L:	netdev@vger.kernel.org
-W:	http://www.netxen.com
+W:	http://www.qlogic.com
 S:	Supported
 F:	drivers/net/netxen/
 

diff --git a/trunk/arch/alpha/include/asm/socket.h b/trunk/arch/alpha/include/asm/socket.h
@@ -67,6 +67,8 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             40
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */

diff --git a/trunk/arch/alpha/include/asm/unistd.h b/trunk/arch/alpha/include/asm/unistd.h
@@ -433,10 +433,11 @@
 #define __NR_signalfd			476
 #define __NR_timerfd			477
 #define __NR_eventfd			478
+#define __NR_recvmmsg			479
 
 #ifdef __KERNEL__
 
-#define NR_SYSCALLS			479
+#define NR_SYSCALLS			480
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR

diff --git a/trunk/arch/alpha/kernel/systbls.S b/trunk/arch/alpha/kernel/systbls.S
@@ -497,6 +497,7 @@ sys_call_table:
 	.quad sys_signalfd
 	.quad sys_ni_syscall
 	.quad sys_eventfd
+	.quad sys_recvmmsg
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object

diff --git a/trunk/arch/arm/include/asm/socket.h b/trunk/arch/arm/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/trunk/arch/arm/kernel/calls.S b/trunk/arch/arm/kernel/calls.S
@@ -374,6 +374,7 @@
 		CALL(sys_pwritev)
 		CALL(sys_rt_tgsigqueueinfo)
 		CALL(sys_perf_event_open)
+/* 365 */	CALL(sys_recvmmsg)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

diff --git a/trunk/arch/avr32/include/asm/socket.h b/trunk/arch/avr32/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* __ASM_AVR32_SOCKET_H */
diff --git a/trunk/arch/avr32/kernel/syscall_table.S b/trunk/arch/avr32/kernel/syscall_table.S
@@ -295,4 +295,5 @@ sys_call_table:
 	.long	sys_signalfd
 	.long	sys_ni_syscall		/* 280, was sys_timerfd */
 	.long	sys_eventfd
+	.long	sys_recvmmsg
 	.long	sys_ni_syscall		/* r8 is saturated at nr_syscalls */
diff --git a/trunk/arch/blackfin/mach-common/entry.S b/trunk/arch/blackfin/mach-common/entry.S
@@ -1600,6 +1600,7 @@ ENTRY(_sys_call_table)
 	.long _sys_pwritev
 	.long _sys_rt_tgsigqueueinfo
 	.long _sys_perf_event_open
+	.long _sys_recvmmsg		/* 370 */
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall

diff --git a/trunk/arch/cris/include/asm/socket.h b/trunk/arch/cris/include/asm/socket.h
@@ -62,6 +62,8 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
 
 
diff --git a/trunk/arch/frv/include/asm/socket.h b/trunk/arch/frv/include/asm/socket.h
@@ -60,5 +60,7 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
 
diff --git a/trunk/arch/h8300/include/asm/socket.h b/trunk/arch/h8300/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/trunk/arch/ia64/include/asm/socket.h b/trunk/arch/ia64/include/asm/socket.h
@@ -69,4 +69,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_IA64_SOCKET_H */
diff --git a/trunk/arch/ia64/include/asm/unistd.h b/trunk/arch/ia64/include/asm/unistd.h
@@ -311,11 +311,12 @@
 #define __NR_preadv			1319
 #define __NR_pwritev			1320
 #define __NR_rt_tgsigqueueinfo		1321
+#define __NR_rt_recvmmsg		1322
 
 #ifdef __KERNEL__
 
 
-#define NR_syscalls			298 /* length of syscall table */
+#define NR_syscalls			299 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about

diff --git a/trunk/arch/ia64/kernel/entry.S b/trunk/arch/ia64/kernel/entry.S
@@ -1806,6 +1806,7 @@ sys_call_table:
 	data8 sys_preadv
 	data8 sys_pwritev			// 1320
 	data8 sys_rt_tgsigqueueinfo
+	data8 sys_recvmmsg
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/trunk/arch/m32r/include/asm/socket.h b/trunk/arch/m32r/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_M32R_SOCKET_H */
diff --git a/trunk/arch/m68k/include/asm/socket.h b/trunk/arch/m68k/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/trunk/arch/microblaze/kernel/syscall_table.S b/trunk/arch/microblaze/kernel/syscall_table.S
@@ -371,3 +371,4 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall
 	.long sys_rt_tgsigqueueinfo	/* 365 */
 	.long sys_perf_event_open
+	.long sys_recvmmsg
diff --git a/trunk/arch/mips/include/asm/socket.h b/trunk/arch/mips/include/asm/socket.h
@@ -80,6 +80,8 @@ To add: #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             40
+
 #ifdef __KERNEL__
 
 /** sock_type - Socket types