---

yaml
---
r: 171426
b: refs/heads/master
c: 4f2c532
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ada0394cede08702b604a4c8ee13409a4109e773
+refs/heads/master: 4f2c53268ad1bdc7d6d12ca8bd110bb288a14300

trunk/drivers/net/wireless/rt2x00/rt2800usb.c

@@ -259,6 +259,13 @@ static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev,
 	mutex_unlock(&rt2x00dev->csr_mutex);
 }
 
+static inline void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
+				      const u8 command, const u8 token,
+				      const u8 arg0, const u8 arg1)
+{
+	rt2800usb_mcu_request(rt2x00dev, command, token, arg0, arg1);
+}
+
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 static const struct rt2x00debug rt2800usb_rt2x00debug = {
 	.owner	= THIS_MODULE,
@@ -319,10 +326,10 @@ static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
 				   EEPROM_FREQ_LED_MODE);
 
 	if (led->type == LED_TYPE_RADIO) {
-		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+		rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
 				      enabled ? 0x20 : 0);
 	} else if (led->type == LED_TYPE_ASSOC) {
-		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+		rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
 				      enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
 	} else if (led->type == LED_TYPE_QUALITY) {
 		/*
@@ -333,7 +340,7 @@ static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
 		 * work with bitshifting:
 		 *	(1 << level) - 1
 		 */
-		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+		rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
 				      (1 << brightness / (LED_FULL / 6)) - 1,
 				      polarity);
 	}
@@ -1233,13 +1240,13 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Send signal to firmware during boot time.
 	 */
-	rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
+	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
 
 	if ((chipset == 0x3070) ||
 	    (chipset == 0x3071) ||
 	    (chipset == 0x3572)) {
 		udelay(200);
-		rt2800usb_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
+		rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
 		udelay(10);
 	}
 
@@ -1875,15 +1882,15 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 	 * Initialize LED control
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
-	rt2800usb_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
+	rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
 			      word & 0xff, (word >> 8) & 0xff);
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
-	rt2800usb_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
+	rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
 			      word & 0xff, (word >> 8) & 0xff);
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
-	rt2800usb_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
+	rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
 			      word & 0xff, (word >> 8) & 0xff);
 
 	return 0;
@@ -1912,9 +1919,9 @@ static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
 			       enum dev_state state)
 {
 	if (state == STATE_AWAKE)
-		rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
+		rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
 	else
-		rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+		rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
 
 	return 0;
 }