---

yaml
---
r: 223038
b: refs/heads/master
c: ebb2738
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6d20e8406f0942228a73000663c2b33f488103ea
+refs/heads/master: ebb27386ffd2fcd0fad141e0eee97b8070f94ee2

trunk/Documentation/filesystems/vfs.txt

@@ -660,11 +660,10 @@ struct address_space_operations {
   releasepage: releasepage is called on PagePrivate pages to indicate
         that the page should be freed if possible.  ->releasepage
         should remove any private data from the page and clear the
-        PagePrivate flag.  It may also remove the page from the
-        address_space.  If this fails for some reason, it may indicate
-        failure with a 0 return value.
-	This is used in two distinct though related cases.  The first
-        is when the VM finds a clean page with no active users and
+        PagePrivate flag. If releasepage() fails for some reason, it must
+	indicate failure with a 0 return value.
+	releasepage() is used in two distinct though related cases.  The
+	first is when the VM finds a clean page with no active users and
         wants to make it a free page.  If ->releasepage succeeds, the
         page will be removed from the address_space and become free.
 

trunk/MAINTAINERS

@@ -2060,7 +2060,7 @@ F:	Documentation/blockdev/drbd/
 
 DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
 M:	Greg Kroah-Hartman <gregkh@suse.de>
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
 S:	Supported
 F:	Documentation/kobject.txt
 F:	drivers/base/
@@ -4064,9 +4064,8 @@ F:	drivers/scsi/NCR_D700.*
 
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
 M:	Faisal Latif <faisal.latif@intel.com>
-M:	Chien Tung <chien.tin.tung@intel.com>
 L:	linux-rdma@vger.kernel.org
-W:	http://www.neteffect.com
+W:	http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm
 S:	Supported
 F:	drivers/infiniband/hw/nes/
 

trunk/arch/x86/xen/mmu.c

@@ -2415,8 +2415,6 @@ void __init xen_init_mmu_ops(void)
 	x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done;
 	pv_mmu_ops = xen_mmu_ops;
 
-	vmap_lazy_unmap = false;
-
 	memset(dummy_mapping, 0xff, PAGE_SIZE);
 }
 

trunk/drivers/gpio/cs5535-gpio.c

@@ -56,6 +56,18 @@ static struct cs5535_gpio_chip {
  * registers, see include/linux/cs5535.h.
  */
 
+static void errata_outl(u32 val, unsigned long addr)
+{
+	/*
+	 * According to the CS5536 errata (#36), after suspend
+	 * a write to the high bank GPIO register will clear all
+	 * non-selected bits; the recommended workaround is a
+	 * read-modify-write operation.
+	 */
+	val |= inl(addr);
+	outl(val, addr);
+}
+
 static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
 		unsigned int reg)
 {
@@ -64,7 +76,7 @@ static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
 		outl(1 << offset, chip->base + reg);
 	else
 		/* high bank register */
-		outl(1 << (offset - 16), chip->base + 0x80 + reg);
+		errata_outl(1 << (offset - 16), chip->base + 0x80 + reg);
 }
 
 void cs5535_gpio_set(unsigned offset, unsigned int reg)
@@ -86,7 +98,7 @@ static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
 		outl(1 << (offset + 16), chip->base + reg);
 	else
 		/* high bank register */
-		outl(1 << offset, chip->base + 0x80 + reg);
+		errata_outl(1 << offset, chip->base + 0x80 + reg);
 }
 
 void cs5535_gpio_clear(unsigned offset, unsigned int reg)

trunk/drivers/hid/hid-core.c

@@ -1386,6 +1386,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },

trunk/drivers/hid/hid-egalax.c

@@ -221,7 +221,7 @@ static int egalax_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	struct egalax_data *td;
 	struct hid_report *report;
 
-	td = kmalloc(sizeof(struct egalax_data), GFP_KERNEL);
+	td = kzalloc(sizeof(struct egalax_data), GFP_KERNEL);
 	if (!td) {
 		dev_err(&hdev->dev, "cannot allocate eGalax data\n");
 		return -ENOMEM;

trunk/drivers/hid/hid-input.c

@@ -174,7 +174,7 @@ static int hidinput_setkeycode(struct input_dev *dev,
 
 		clear_bit(*old_keycode, dev->keybit);
 		set_bit(usage->code, dev->keybit);
-		dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n",
+		dbg_hid("Assigned keycode %d to HID usage code %x\n",
 			usage->code, usage->hid);
 
 		/*
@@ -203,8 +203,8 @@ static int hidinput_setkeycode(struct input_dev *dev,
  *
  * as seen in the HID specification v1.11 6.2.2.7 Global Items.
  *
- * Only exponent 1 length units are processed. Centimeters are converted to
- * inches. Degrees are converted to radians.
+ * Only exponent 1 length units are processed. Centimeters and inches are
+ * converted to millimeters. Degrees are converted to radians.
  */
 static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 {
@@ -225,13 +225,16 @@ static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 	 */
 	if (code == ABS_X || code == ABS_Y || code == ABS_Z) {
 		if (field->unit == 0x11) {		/* If centimeters */
-			/* Convert to inches */
-			prev = logical_extents;
-			logical_extents *= 254;
-			if (logical_extents < prev)
+			/* Convert to millimeters */
+			unit_exponent += 1;
+		} else if (field->unit == 0x13) {	/* If inches */
+			/* Convert to millimeters */
+			prev = physical_extents;
+			physical_extents *= 254;
+			if (physical_extents < prev)
 				return 0;
-			unit_exponent += 2;
-		} else if (field->unit != 0x13) {	/* If not inches */
+			unit_exponent -= 1;
+		} else {
 			return 0;
 		}
 	} else if (code == ABS_RX || code == ABS_RY || code == ABS_RZ) {

trunk/drivers/hid/hid-tmff.c

@@ -256,6 +256,8 @@ static const struct hid_device_id tm_devices[] = {
 		.driver_data = (unsigned long)ff_joystick },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654),	/* FGT Force Feedback Wheel */
 		.driver_data = (unsigned long)ff_joystick },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a),	/* F430 Force Feedback Wheel */
+		.driver_data = (unsigned long)ff_joystick },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, tm_devices);

trunk/drivers/infiniband/core/ud_header.c

@@ -277,36 +277,6 @@ void ib_ud_header_init(int     		    payload_bytes,
 }
 EXPORT_SYMBOL(ib_ud_header_init);
 
-/**
- * ib_lrh_header_pack - Pack LRH header struct into wire format
- * @lrh:unpacked LRH header struct
- * @buf:Buffer to pack into
- *
- * ib_lrh_header_pack() packs the LRH header structure @lrh into
- * wire format in the buffer @buf.
- */
-int ib_lrh_header_pack(struct ib_unpacked_lrh *lrh, void *buf)
-{
-	ib_pack(lrh_table, ARRAY_SIZE(lrh_table), lrh, buf);
-	return 0;
-}
-EXPORT_SYMBOL(ib_lrh_header_pack);
-
-/**
- * ib_lrh_header_unpack - Unpack LRH structure from wire format
- * @lrh:unpacked LRH header struct
- * @buf:Buffer to pack into
- *
- * ib_lrh_header_unpack() unpacks the LRH header structure from
- * wire format (in buf) into @lrh.
- */
-int ib_lrh_header_unpack(void *buf, struct ib_unpacked_lrh *lrh)
-{
-	ib_unpack(lrh_table, ARRAY_SIZE(lrh_table), buf, lrh);
-	return 0;
-}
-EXPORT_SYMBOL(ib_lrh_header_unpack);
-
 /**
  * ib_ud_header_pack - Pack UD header struct into wire format
  * @header:UD header struct

trunk/drivers/infiniband/core/uverbs_marshall.c

@@ -40,18 +40,21 @@ void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst,
 	dst->grh.sgid_index        = src->grh.sgid_index;
 	dst->grh.hop_limit         = src->grh.hop_limit;
 	dst->grh.traffic_class     = src->grh.traffic_class;
+	memset(&dst->grh.reserved, 0, sizeof(dst->grh.reserved));
 	dst->dlid 	    	   = src->dlid;
 	dst->sl   	    	   = src->sl;
 	dst->src_path_bits 	   = src->src_path_bits;
 	dst->static_rate   	   = src->static_rate;
 	dst->is_global             = src->ah_flags & IB_AH_GRH ? 1 : 0;
 	dst->port_num 	    	   = src->port_num;
+	dst->reserved 		   = 0;
 }
 EXPORT_SYMBOL(ib_copy_ah_attr_to_user);
 
 void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
 			     struct ib_qp_attr *src)
 {
+	dst->qp_state	        = src->qp_state;
 	dst->cur_qp_state	= src->cur_qp_state;
 	dst->path_mtu		= src->path_mtu;
 	dst->path_mig_state	= src->path_mig_state;
@@ -83,6 +86,7 @@ void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
 	dst->rnr_retry		= src->rnr_retry;
 	dst->alt_port_num	= src->alt_port_num;
 	dst->alt_timeout	= src->alt_timeout;
+	memset(dst->reserved, 0, sizeof(dst->reserved));
 }
 EXPORT_SYMBOL(ib_copy_qp_attr_to_user);
 

trunk/drivers/infiniband/hw/mlx4/main.c

@@ -219,7 +219,7 @@ static int eth_link_query_port(struct ib_device *ibdev, u8 port,
 	struct net_device *ndev;
 	enum ib_mtu tmp;
 
-	props->active_width	= IB_WIDTH_4X;
+	props->active_width	= IB_WIDTH_1X;
 	props->active_speed	= 4;
 	props->port_cap_flags	= IB_PORT_CM_SUP;
 	props->gid_tbl_len	= to_mdev(ibdev)->dev->caps.gid_table_len[port];
@@ -242,7 +242,7 @@ static int eth_link_query_port(struct ib_device *ibdev, u8 port,
 	tmp = iboe_get_mtu(ndev->mtu);
 	props->active_mtu = tmp ? min(props->max_mtu, tmp) : IB_MTU_256;
 
-	props->state		= netif_running(ndev) &&  netif_oper_up(ndev) ?
+	props->state		= (netif_running(ndev) && netif_carrier_ok(ndev)) ?
 					IB_PORT_ACTIVE : IB_PORT_DOWN;
 	props->phys_state	= state_to_phys_state(props->state);
 

trunk/drivers/infiniband/hw/mlx4/qp.c

@@ -1816,6 +1816,11 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
 				    MLX4_WQE_CTRL_FENCE : 0) | size;
 
+		if (be16_to_cpu(vlan) < 0x1000) {
+			ctrl->ins_vlan = 1 << 6;
+			ctrl->vlan_tag = vlan;
+		}
+
 		/*
 		 * Make sure descriptor is fully written before
 		 * setting ownership bit (because HW can start
@@ -1831,11 +1836,6 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] |
 			(ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh;
 
-		if (be16_to_cpu(vlan) < 0x1000) {
-			ctrl->ins_vlan = 1 << 6;
-			ctrl->vlan_tag = vlan;
-		}
-
 		stamp = ind + qp->sq_spare_wqes;
 		ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift);