---

yaml
---
r: 184646
b: refs/heads/master
c: 4b1f76e
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: df791b3ebf181b3eece9c770565fcf0844bbd7cb
+refs/heads/master: 4b1f76ed4f8012929494261eb6923b3c98554a9a

trunk/arch/arm/mach-omap2/clock.c

@@ -42,6 +42,51 @@ u8 cpu_mask;
  * OMAP2/3/4 specific clock functions
  *-------------------------------------------------------------------------*/
 
+/* Private functions */
+
+/**
+ * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE).  This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code.  No return value.
+ */
+static void _omap2_module_wait_ready(struct clk *clk)
+{
+	void __iomem *companion_reg, *idlest_reg;
+	u8 other_bit, idlest_bit;
+
+	/* Not all modules have multiple clocks that their IDLEST depends on */
+	if (clk->ops->find_companion) {
+		clk->ops->find_companion(clk, &companion_reg, &other_bit);
+		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+			return;
+	}
+
+	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
+
+	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
+}
+
+/* Enables clock without considering parent dependencies or use count
+ * REVISIT: Maybe change this to use clk->enable like on omap1?
+ */
+static int _omap2_clk_enable(struct clk *clk)
+{
+	return clk->ops->enable(clk);
+}
+
+/* Disables clock without considering parent dependencies or use count */
+static void _omap2_clk_disable(struct clk *clk)
+{
+	clk->ops->disable(clk);
+}
+
+/* Public functions */
+
 /**
  * omap2xxx_clk_commit - commit clock parent/rate changes in hardware
  * @clk: struct clk *
@@ -149,33 +194,6 @@ void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
 	*idlest_bit = clk->enable_bit;
 }
 
-/**
- * omap2_module_wait_ready - wait for an OMAP module to leave IDLE
- * @clk: struct clk * belonging to the module
- *
- * If the necessary clocks for the OMAP hardware IP block that
- * corresponds to clock @clk are enabled, then wait for the module to
- * indicate readiness (i.e., to leave IDLE).  This code does not
- * belong in the clock code and will be moved in the medium term to
- * module-dependent code.  No return value.
- */
-static void omap2_module_wait_ready(struct clk *clk)
-{
-	void __iomem *companion_reg, *idlest_reg;
-	u8 other_bit, idlest_bit;
-
-	/* Not all modules have multiple clocks that their IDLEST depends on */
-	if (clk->ops->find_companion) {
-		clk->ops->find_companion(clk, &companion_reg, &other_bit);
-		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
-			return;
-	}
-
-	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
-
-	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
-}
-
 int omap2_dflt_clk_enable(struct clk *clk)
 {
 	u32 v;
@@ -195,7 +213,7 @@ int omap2_dflt_clk_enable(struct clk *clk)
 	v = __raw_readl(clk->enable_reg); /* OCP barrier */
 
 	if (clk->ops->find_idlest)
-		omap2_module_wait_ready(clk);
+		_omap2_module_wait_ready(clk);
 
 	return 0;
 }
@@ -235,20 +253,6 @@ const struct clkops clkops_omap2_dflt = {
 	.disable	= omap2_dflt_clk_disable,
 };
 
-/* Enables clock without considering parent dependencies or use count
- * REVISIT: Maybe change this to use clk->enable like on omap1?
- */
-static int _omap2_clk_enable(struct clk *clk)
-{
-	return clk->ops->enable(clk);
-}
-
-/* Disables clock without considering parent dependencies or use count */
-static void _omap2_clk_disable(struct clk *clk)
-{
-	clk->ops->disable(clk);
-}
-
 void omap2_clk_disable(struct clk *clk)
 {
 	if (clk->usecount > 0 && !(--clk->usecount)) {