---

yaml
---
r: 155554
b: refs/heads/master
c: db78450
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e2ce0e718ee72e5915d35a6f4af40fa249cd626d
+refs/heads/master: db78450abdb88b44322c551fc2868d1b2383355b

trunk/.gitignore

@@ -27,6 +27,7 @@
 *.gz
 *.lzma
 *.patch
+*.gcno
 
 #
 # Top-level generic files

trunk/Documentation/dvb/get_dvb_firmware

@@ -25,7 +25,7 @@ use IO::Handle;
 		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
-		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" );
+		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" );
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -381,6 +381,57 @@ sub cx18 {
     $allfiles;
 }
 
+sub mpc718 {
+    my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip';
+    my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive";
+    my $fwfile = "dvb-cx18-mpc718-mt352.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+    wgetfile($archive, $url);
+    unzip($archive, $tmpdir);
+
+    my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys";
+    my $found = 0;
+
+    open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n";
+    binmode IN;
+    open OUT, '>', $fwfile;
+    binmode OUT;
+    {
+	# Block scope because we change the line terminator variable $/
+	my $prevlen = 0;
+	my $currlen;
+
+	# Buried in the data segment are 3 runs of almost identical
+	# register-value pairs that end in 0x5d 0x01 which is a "TUNER GO"
+	# command for the MT352.
+	# Pull out the middle run (because it's easy) of register-value
+	# pairs to make the "firmware" file.
+
+	local $/ = "\x5d\x01"; # MT352 "TUNER GO"
+
+	while (<IN>) {
+	    $currlen = length($_);
+	    if ($prevlen == $currlen && $currlen <= 64) {
+		chop; chop; # Get rid of "TUNER GO"
+		s/^\0\0//;  # get rid of leading 00 00 if it's there
+		printf OUT "$_";
+		$found = 1;
+		last;
+	    }
+	    $prevlen = $currlen;
+	}
+    }
+    close OUT;
+    close IN;
+    if (!$found) {
+	unlink $fwfile;
+	die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n";
+    }
+    $fwfile;
+}
+
 sub cx23885 {
     my $url = "http://linuxtv.org/downloads/firmware/";
 

trunk/Documentation/feature-removal-schedule.txt

@@ -458,3 +458,13 @@ Why:	Remove the old legacy 32bit machine check code. This has been
 	but the old version has been kept around for easier testing. Note this
 	doesn't impact the old P5 and WinChip machine check handlers.
 Who:	Andi Kleen <andi@firstfloor.org>
+
+----------------------------
+
+What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+	exported interface anymore.
+When:	2.6.33
+Why:	cpu_policy_rwsem has a new cleaner definition making it local to
+	cpufreq core and contained inside cpufreq.c. Other dependent
+	drivers should not use it in order to safely avoid lockdep issues.
+Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>

trunk/Documentation/video4linux/CARDLIST.em28xx

@@ -66,3 +66,4 @@
  68 -> Terratec AV350                           (em2860)        [0ccd:0084]
  69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
  70 -> Evga inDtube                             (em2882)
+ 71 -> Silvercrest Webcam 1.3mpix               (em2820/em2840)

trunk/MAINTAINERS

@@ -5803,17 +5803,17 @@ P:	Jiri Kosina
 M:	trivial@kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
 S:	Maintained
-F:	drivers/char/tty_*
-F:	drivers/serial/serial_core.c
-F:	include/linux/serial_core.h
-F:	include/linux/serial.h
-F:	include/linux/tty.h
 
 TTY LAYER
 P:	Alan Cox
 M:	alan@lxorguk.ukuu.org.uk
 S:	Maintained
 T:	stgit http://zeniv.linux.org.uk/~alan/ttydev/
+F:	drivers/char/tty_*
+F:	drivers/serial/serial_core.c
+F:	include/linux/serial_core.h
+F:	include/linux/serial.h
+F:	include/linux/tty.h
 
 TULIP NETWORK DRIVERS
 P:	Grant Grundler

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 31
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -140,15 +140,13 @@ _all: modules
 endif
 
 srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-TOPDIR		:= $(srctree)
-# FIXME - TOPDIR is obsolete, use srctree/objtree
 objtree		:= $(CURDIR)
 src		:= $(srctree)
 obj		:= $(objtree)
 
 VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 
-export srctree objtree VPATH TOPDIR
+export srctree objtree VPATH
 
 
 # SUBARCH tells the usermode build what the underlying arch is.  That is set
@@ -344,7 +342,8 @@ KBUILD_CPPFLAGS := -D__KERNEL__
 
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
-		   -Werror-implicit-function-declaration
+		   -Werror-implicit-function-declaration \
+		   -Wno-format-security
 KBUILD_AFLAGS   := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)

trunk/arch/arm/mach-pxa/include/mach/mfp-pxa300.h

@@ -567,9 +567,9 @@
 #define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
 #define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
 
-#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
-#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
-#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
+#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
+#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
 #endif /* CONFIG_CPU_PXA310 */
 
 #endif /* __ASM_ARCH_MFP_PXA300_H */

trunk/arch/arm/mach-pxa/pxa3xx.c

@@ -250,7 +250,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
 static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
 	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
 	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),

trunk/arch/arm/plat-pxa/gpio.c

@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
-#include <linux/bootmem.h>
+#include <linux/slab.h>
 
 #include <mach/gpio.h>
 
@@ -112,17 +112,12 @@ static int __init pxa_init_gpio_chip(int gpio_end)
 	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
 	struct pxa_gpio_chip *chips;
 
-	/* this is early, we have to use bootmem allocator, and we really
-	 * want this to be allocated dynamically for different 'gpio_end'
-	 */
-	chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+	chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
 	if (chips == NULL) {
 		pr_err("%s: failed to allocate GPIO chips\n", __func__);
 		return -ENOMEM;
 	}
 
-	memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
-
 	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
 		struct gpio_chip *c = &chips[i].chip;
 

trunk/arch/avr32/kernel/traps.c

@@ -32,22 +32,25 @@ void NORET_TYPE die(const char *str, struct pt_regs *regs, long err)
 	spin_lock_irq(&die_lock);
 	bust_spinlocks(1);
 
-	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
+	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n",
 	       str, err, ++die_counter);
+
+	printk(KERN_EMERG);
+
 #ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
+	printk(KERN_CONT "PREEMPT ");
 #endif
 #ifdef CONFIG_FRAME_POINTER
-	printk("FRAME_POINTER ");
+	printk(KERN_CONT "FRAME_POINTER ");
 #endif
 	if (current_cpu_data.features & AVR32_FEATURE_OCD) {
 		unsigned long did = ocd_read(DID);
-		printk("chip: 0x%03lx:0x%04lx rev %lu\n",
+		printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n",
 		       (did >> 1) & 0x7ff,
 		       (did >> 12) & 0x7fff,
 		       (did >> 28) & 0xf);
 	} else {
-		printk("cpu: arch %u r%u / core %u r%u\n",
+		printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n",
 		       current_cpu_data.arch_type,
 		       current_cpu_data.arch_revision,
 		       current_cpu_data.cpu_type,

trunk/arch/blackfin/kernel/setup.c

@@ -408,13 +408,14 @@ static void __init print_memory_map(char *who)
 			bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
 		switch (bfin_memmap.map[i].type) {
 		case BFIN_MEMMAP_RAM:
-				printk("(usable)\n");
-				break;
+			printk(KERN_CONT "(usable)\n");
+			break;
 		case BFIN_MEMMAP_RESERVED:
-				printk("(reserved)\n");
-				break;
-		default:	printk("type %lu\n", bfin_memmap.map[i].type);
-				break;
+			printk(KERN_CONT "(reserved)\n");
+			break;
+		default:
+			printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
+			break;
 		}
 	}
 }
@@ -614,19 +615,19 @@ static __init void memory_setup(void)
 	printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
 
 	printk(KERN_INFO "Memory map:\n"
-		KERN_INFO "  fixedcode = 0x%p-0x%p\n"
-		KERN_INFO "  text      = 0x%p-0x%p\n"
-		KERN_INFO "  rodata    = 0x%p-0x%p\n"
-		KERN_INFO "  bss       = 0x%p-0x%p\n"
-		KERN_INFO "  data      = 0x%p-0x%p\n"
-		KERN_INFO "    stack   = 0x%p-0x%p\n"
-		KERN_INFO "  init      = 0x%p-0x%p\n"
-		KERN_INFO "  available = 0x%p-0x%p\n"
+	       "  fixedcode = 0x%p-0x%p\n"
+	       "  text      = 0x%p-0x%p\n"
+	       "  rodata    = 0x%p-0x%p\n"
+	       "  bss       = 0x%p-0x%p\n"
+	       "  data      = 0x%p-0x%p\n"
+	       "    stack   = 0x%p-0x%p\n"
+	       "  init      = 0x%p-0x%p\n"
+	       "  available = 0x%p-0x%p\n"
 #ifdef CONFIG_MTD_UCLINUX
-		KERN_INFO "  rootfs    = 0x%p-0x%p\n"
+	       "  rootfs    = 0x%p-0x%p\n"
 #endif
 #if DMA_UNCACHED_REGION > 0
-		KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
+	       "  DMA Zone  = 0x%p-0x%p\n"
 #endif
 		, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
 		_stext, _etext,
@@ -859,13 +860,13 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	printk(KERN_INFO "Hardware Trace ");
 	if (bfin_read_TBUFCTL() & 0x1)
-		printk("Active ");
+		printk(KERN_CONT "Active ");
 	else
-		printk("Off ");
+		printk(KERN_CONT "Off ");
 	if (bfin_read_TBUFCTL() & 0x2)
-		printk("and Enabled\n");
+		printk(KERN_CONT "and Enabled\n");
 	else
-	printk("and Disabled\n");
+		printk(KERN_CONT "and Disabled\n");
 
 #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
 	/* we need to initialize the Flashrom device here since we might