---

yaml
---
r: 137878
b: refs/heads/master
c: a1a6ee7
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 7aa0eabde08259c47586df934921c67cff36e7dc
+refs/heads/master: a1a6ee74f2c68918f2e145dccba3637eea91a52a

trunk/drivers/media/video/em28xx/em28xx-audio.c

@@ -245,7 +245,7 @@ static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs,
 {
 	struct snd_pcm_runtime *runtime = subs->runtime;
 
-	dprintk("Alocating vbuffer\n");
+	dprintk("Allocating vbuffer\n");
 	if (runtime->dma_area) {
 		if (runtime->dma_bytes > size)
 			return 0;
@@ -409,8 +409,7 @@ static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream,
 static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream
 						    *substream)
 {
-       unsigned long flags;
-
+	unsigned long flags;
 	struct em28xx *dev;
 	snd_pcm_uframes_t hwptr_done;
 

trunk/drivers/media/video/em28xx/em28xx-cards.c

@@ -244,7 +244,7 @@ struct em28xx_board em28xx_boards[] = {
 		.name         = "Hauppauge WinTV USB 2",
 		.tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 		.tda9887_conf = TDA9887_PRESENT |
-				TDA9887_PORT1_ACTIVE|
+				TDA9887_PORT1_ACTIVE |
 				TDA9887_PORT2_ACTIVE,
 		.decoder      = EM28XX_TVP5150,
 		.has_msp34xx  = 1,
@@ -517,7 +517,7 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
 		.name          = "Yakumo MovieMixer",
-		.tuner_type   = TUNER_ABSENT,	/* Capture only device */
+		.tuner_type    = TUNER_ABSENT,	/* Capture only device */
 		.decoder       = EM28XX_TVP5150,
 		.input         = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -861,11 +861,11 @@ struct em28xx_board em28xx_boards[] = {
 		} },
 	},
 	[EM2800_BOARD_GRABBEEX_USB2800] = {
-		.name         = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
-		.is_em2800    = 1,
-		.decoder      = EM28XX_SAA711X,
-		.tuner_type   = TUNER_ABSENT, /* capture only board */
-		.input        = { {
+		.name       = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
+		.is_em2800  = 1,
+		.decoder    = EM28XX_SAA711X,
+		.tuner_type = TUNER_ABSENT, /* capture only board */
+		.input      = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
 			.amux     = EM28XX_AMUX_LINE_IN,
@@ -1217,7 +1217,9 @@ struct em28xx_board em28xx_boards[] = {
 		.has_dvb      = 1,
 		.dvb_gpio     = kworld_330u_digital,
 		.xclk             = EM28XX_XCLK_FREQUENCY_12MHZ,
-		.i2c_speed        = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_EEPROM_ON_BOARD | EM28XX_I2C_EEPROM_KEY_VALID,
+		.i2c_speed        = EM28XX_I2C_CLK_WAIT_ENABLE |
+				    EM28XX_I2C_EEPROM_ON_BOARD |
+				    EM28XX_I2C_EEPROM_KEY_VALID,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
@@ -1299,7 +1301,7 @@ struct em28xx_board em28xx_boards[] = {
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
 /* table of devices that work with this driver */
-struct usb_device_id em28xx_id_table [] = {
+struct usb_device_id em28xx_id_table[] = {
 	{ USB_DEVICE(0xeb1a, 0x2750),
 			.driver_info = EM2750_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2751),
@@ -1401,7 +1403,7 @@ MODULE_DEVICE_TABLE(usb, em28xx_id_table);
 /*
  * EEPROM hash table for devices with generic USB IDs
  */
-static struct em28xx_hash_table em28xx_eeprom_hash [] = {
+static struct em28xx_hash_table em28xx_eeprom_hash[] = {
 	/* P/N: SA 60002070465 Tuner: TVF7533-MF */
 	{0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
 	{0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
@@ -1433,7 +1435,7 @@ int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
 }
 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
 
-static void inline em28xx_set_model(struct em28xx *dev)
+static inline void em28xx_set_model(struct em28xx *dev)
 {
 	memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
 

trunk/drivers/media/video/em28xx/em28xx-core.c

@@ -33,17 +33,17 @@
 /* #define ENABLE_DEBUG_ISOC_FRAMES */
 
 static unsigned int core_debug;
-module_param(core_debug,int,0644);
-MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
+module_param(core_debug, int, 0644);
+MODULE_PARM_DESC(core_debug, "enable debug messages [core]");
 
 #define em28xx_coredbg(fmt, arg...) do {\
 	if (core_debug) \
 		printk(KERN_INFO "%s %s :"fmt, \
 			 dev->name, __func__ , ##arg); } while (0)
 
 static unsigned int reg_debug;
-module_param(reg_debug,int,0644);
-MODULE_PARM_DESC(reg_debug,"enable debug messages [URB reg]");
+module_param(reg_debug, int, 0644);
+MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]");
 
 #define em28xx_regdbg(fmt, arg...) do {\
 	if (reg_debug) \
@@ -77,7 +77,7 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
 		return -EINVAL;
 
 	if (reg_debug) {
-		printk( KERN_DEBUG "(pipe 0x%08x): "
+		printk(KERN_DEBUG "(pipe 0x%08x): "
 			"IN:  %02x %02x %02x %02x %02x %02x %02x %02x ",
 			pipe,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
@@ -154,7 +154,7 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
 	if (reg_debug) {
 		int byte;
 
-		printk( KERN_DEBUG "(pipe 0x%08x): "
+		printk(KERN_DEBUG "(pipe 0x%08x): "
 			"OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>",
 			pipe,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
@@ -462,7 +462,8 @@ int em28xx_audio_analog_set(struct em28xx *dev)
 		if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) {
 			int sel = ac97_return_record_select(dev->ctl_aoutput);
 
-			/* Use the same input for both left and right channels */
+			/* Use the same input for both left and right
+			   channels */
 			sel |= (sel << 8);
 
 			em28xx_write_ac97(dev, AC97_RECORD_SELECT, sel);
@@ -698,7 +699,7 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
 		em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
 		/* it seems that both H and V scalers must be active
 		   to work correctly */
-		mode = (h || v)? 0x30: 0x00;
+		mode = (h || v) ? 0x30 : 0x00;
 	}
 	return em28xx_write_reg_bits(dev, EM28XX_R26_COMPR, mode, 0x30);
 }
@@ -958,7 +959,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 			em28xx_err("unable to allocate %i bytes for transfer"
 					" buffer %i%s\n",
 					sb_size, i,
-					in_interrupt()?" while in int":"");
+					in_interrupt() ? " while in int" : "");
 			em28xx_uninit_isoc(dev);
 			return -ENOMEM;
 		}

trunk/drivers/media/video/em28xx/em28xx-i2c.c

@@ -402,10 +402,12 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
 				 dev->name);
 		break;
 	case 2:
-		printk(KERN_INFO "%s:\tI2S audio, sample rate=32k\n", dev->name);
+		printk(KERN_INFO "%s:\tI2S audio, sample rate=32k\n",
+				 dev->name);
 		break;
 	case 3:
-		printk(KERN_INFO "%s:\tI2S audio, 3 sample rates\n", dev->name);
+		printk(KERN_INFO "%s:\tI2S audio, 3 sample rates\n",
+				 dev->name);
 		break;
 	}
 

trunk/drivers/media/video/em28xx/em28xx-video.c

@@ -186,7 +186,8 @@ static void em28xx_copy_video(struct em28xx *dev,
 		em28xx_isocdbg("Overflow of %zi bytes past buffer end (1)\n",
 			       ((char *)startwrite + lencopy) -
 			       ((char *)outp + buf->vb.size));
-		lencopy = remain = (char *)outp + buf->vb.size - (char *)startwrite;
+		remain = (char *)outp + buf->vb.size - (char *)startwrite;
+		lencopy = remain;
 	}
 	if (lencopy <= 0)
 		return;
@@ -202,7 +203,8 @@ static void em28xx_copy_video(struct em28xx *dev,
 		else
 			lencopy = bytesperline;
 
-		if ((char *)startwrite + lencopy > (char *)outp + buf->vb.size) {
+		if ((char *)startwrite + lencopy > (char *)outp +
+		    buf->vb.size) {
 			em28xx_isocdbg("Overflow of %zi bytes past buffer end (2)\n",
 				       ((char *)startwrite + lencopy) -
 				       ((char *)outp + buf->vb.size));
@@ -347,7 +349,7 @@ static inline int em28xx_isoc_copy(struct em28xx *dev, struct urb *urb)
 		}
 		if (p[0] == 0x22 && p[1] == 0x5a) {
 			em28xx_isocdbg("Video frame %d, length=%i, %s\n", p[2],
-				       len, (p[2] & 1)? "odd" : "even");
+				       len, (p[2] & 1) ? "odd" : "even");
 
 			if (!(p[2] & 1)) {
 				if (buf != NULL)
@@ -476,7 +478,9 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
 static void
 buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
 {
-	struct em28xx_buffer    *buf     = container_of(vb, struct em28xx_buffer, vb);
+	struct em28xx_buffer    *buf     = container_of(vb,
+							struct em28xx_buffer,
+							vb);
 	struct em28xx_fh        *fh      = vq->priv_data;
 	struct em28xx           *dev     = fh->dev;
 	struct em28xx_dmaqueue  *vidq    = &dev->vidq;
@@ -489,7 +493,9 @@ buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
 static void buffer_release(struct videobuf_queue *vq,
 				struct videobuf_buffer *vb)
 {
-	struct em28xx_buffer   *buf  = container_of(vb, struct em28xx_buffer, vb);
+	struct em28xx_buffer   *buf  = container_of(vb,
+						    struct em28xx_buffer,
+						    vb);
 	struct em28xx_fh       *fh   = vq->priv_data;
 	struct em28xx          *dev  = (struct em28xx *)fh->dev;
 
@@ -557,7 +563,7 @@ static int res_get(struct em28xx_fh *fh)
 
 static int res_check(struct em28xx_fh *fh)
 {
-	return (fh->stream_on);
+	return fh->stream_on;
 }
 
 static void res_free(struct em28xx_fh *fh)
@@ -791,7 +797,7 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	return rc;
 }
 
-static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * norm)
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm)
 {
 	struct em28xx_fh   *fh  = priv;
 	struct em28xx      *dev = fh->dev;
@@ -1436,7 +1442,7 @@ static int vidioc_reqbufs(struct file *file, void *priv,
 	if (rc < 0)
 		return rc;
 
-	return (videobuf_reqbufs(&fh->vb_vidq, rb));
+	return videobuf_reqbufs(&fh->vb_vidq, rb);
 }
 
 static int vidioc_querybuf(struct file *file, void *priv,
@@ -1450,7 +1456,7 @@ static int vidioc_querybuf(struct file *file, void *priv,
 	if (rc < 0)
 		return rc;
 
-	return (videobuf_querybuf(&fh->vb_vidq, b));
+	return videobuf_querybuf(&fh->vb_vidq, b);
 }
 
 static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
@@ -1463,7 +1469,7 @@ static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 	if (rc < 0)
 		return rc;
 
-	return (videobuf_qbuf(&fh->vb_vidq, b));
+	return videobuf_qbuf(&fh->vb_vidq, b);
 }
 
 static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
@@ -1476,8 +1482,7 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 	if (rc < 0)
 		return rc;
 
-	return (videobuf_dqbuf(&fh->vb_vidq, b,
-				file->f_flags & O_NONBLOCK));
+	return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
 }
 
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
@@ -1786,7 +1791,7 @@ em28xx_v4l2_read(struct file *filp, char __user *buf, size_t count,
  * em28xx_v4l2_poll()
  * will allocate buffers when called for the first time
  */
-static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table * wait)
+static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table *wait)
 {
 	struct em28xx_fh *fh = filp->private_data;
 	struct em28xx *dev = fh->dev;
@@ -1939,8 +1944,8 @@ static struct video_device em28xx_radio_template = {
 
 
 static struct video_device *em28xx_vdev_init(struct em28xx *dev,
-					     const struct video_device *template,
-					     const char *type_name)
+					const struct video_device *template,
+					const char *type_name)
 {
 	struct video_device *vfd;
 
@@ -1989,8 +1994,9 @@ int em28xx_register_analog_devices(struct em28xx *dev)
 	/* enable vbi capturing */
 
 /*	em28xx_write_reg(dev, EM28XX_R0E_AUDIOSRC, 0xc0); audio register */
-       val = (u8)em28xx_read_reg(dev, EM28XX_R0F_XCLK);
-       em28xx_write_reg(dev, EM28XX_R0F_XCLK, (EM28XX_XCLK_AUDIO_UNMUTE | val));
+	val = (u8)em28xx_read_reg(dev, EM28XX_R0F_XCLK);
+	em28xx_write_reg(dev, EM28XX_R0F_XCLK,
+			 (EM28XX_XCLK_AUDIO_UNMUTE | val));
 	em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x51);
 
 	em28xx_set_outfmt(dev);
@@ -2025,7 +2031,8 @@ int em28xx_register_analog_devices(struct em28xx *dev)
 	}
 
 	if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
-		dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
+		dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template,
+						  "radio");
 		if (!dev->radio_dev) {
 			em28xx_errdev("cannot allocate video_device.\n");
 			return -ENODEV;

trunk/drivers/media/video/em28xx/em28xx.h

@@ -161,7 +161,8 @@
 */
 
 /* time to wait when stopping the isoc transfer */
-#define EM28XX_URB_TIMEOUT       msecs_to_jiffies(EM28XX_NUM_BUFS * EM28XX_NUM_PACKETS)
+#define EM28XX_URB_TIMEOUT \
+			msecs_to_jiffies(EM28XX_NUM_BUFS * EM28XX_NUM_PACKETS)
 
 /* time in msecs to wait for i2c writes to finish */
 #define EM2800_I2C_WRITE_TIMEOUT 20
@@ -530,7 +531,8 @@ struct em28xx {
 	int num_alt;		/* Number of alternative settings */
 	unsigned int *alt_max_pkt_size;	/* array of wMaxPacketSize */
 	struct urb *urb[EM28XX_NUM_BUFS];	/* urb for isoc transfers */
-	char *transfer_buffer[EM28XX_NUM_BUFS];	/* transfer buffers for isoc transfer */
+	char *transfer_buffer[EM28XX_NUM_BUFS];	/* transfer buffers for isoc
+						   transfer */
 	char urb_buf[URB_MAX_CTRL_SIZE];	/* urb control msg buffer */
 
 	/* helper funcs that call usb_control_msg */