Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/dr…

…m-intel into drm-next Last pile of stuff for 3.7, essentially just a bunch of bigger fixes and a few less intrusive features: - cpu freq interface in sysfs from Ben - cpu edp fixes and some related cleanups - write-combining ptes for pre-gen6 (Chris) - basic CADL support (Peter Wu), this fixes quite a few issues with backlights ... - rework of the gem backing pages handling (preps for stolen mem handling) from Chris - some more cleanup-fallout from the modeset-rework On top of that I've done a backmerge of -rc7(since the conflicts got too messy and I've pushed out broken merged trees too often). I've also included 3 fixes on top of what QA beat on: - Fix for a infoframe handling regression in 3.5 - infoframe blows up too often and 3.6 is pretty much done, so I'd like to merge that through -next and the stable process and give it more exposure before it lands in a stable tree. - ioctl cosmetics^Wspelling fix in the structs (userspace won't be affected, since all existing userspace uses private copies of the ioctl struct definitions, and the struct layout itself is abi compatible). - Bugfix for a regression introduced in this pull's testing cycle. * 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel: (695 commits) drm/i915: Wrap external callers to IPS state with appropriate locks drm/i915: s/cacheing/caching/ drm/i915: make sure we write all the DIP data bytes drm/i915: BUG() on unexpected HDMI register ...
git-mirror · Oct 1, 2012 · 8c98449 · 8c98449
2 parents 7facf16 + f531dcb
commit 8c98449
Show file tree

Hide file tree

Showing 725 changed files with 6,773 additions and 3,880 deletions.
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
@@ -210,3 +210,15 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
@@ -579,7 +579,7 @@ Why:	KVM tracepoints provide mostly equivalent information in a much more
 ----------------------------
 
 What:	at91-mci driver ("CONFIG_MMC_AT91")
-When:	3.7
+When:	3.8
 Why:	There are two mci drivers: at91-mci and atmel-mci. The PDC support
 	was added to atmel-mci as a first step to support more chips.
 	Then at91-mci was kept only for old IP versions (on at91rm9200 and

diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
@@ -21,6 +21,7 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
+  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

diff --git a/Documentation/watchdog/src/watchdog-test.c b/Documentation/watchdog/src/watchdog-test.c
@@ -31,7 +31,7 @@ static void keep_alive(void)
  * or "-e" to enable the card.
  */
 
-void term(int sig)
+static void term(int sig)
 {
     close(fd);
     fprintf(stderr, "Stopping watchdog ticks...\n");

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -3388,7 +3388,7 @@ M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T:	git git://git.fluff.org/bjdooks/linux.git
+T:	git git://git.pengutronix.de/git/wsa/linux.git
 S:	Maintained
 F:	Documentation/i2c/
 F:	drivers/i2c/
@@ -3666,11 +3666,12 @@ F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/
 
 INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT)
-M:	Joseph Cihula <joseph.cihula@intel.com>
+M:	Richard L Maliszewski <richard.l.maliszewski@intel.com>
+M:	Gang Wei <gang.wei@intel.com>
 M:	Shane Wang <shane.wang@intel.com>
 L:	tboot-devel@lists.sourceforge.net
 W:	http://tboot.sourceforge.net
-T:	Mercurial http://www.bughost.org/repos.hg/tboot.hg
+T:	hg http://tboot.hg.sourceforge.net:8000/hgroot/tboot/tboot
 S:	Supported
 F:	Documentation/intel_txt.txt
 F:	include/linux/tboot.h

diff --git a/Makefile b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
-NAME = Saber-toothed Squirrel
+EXTRAVERSION = -rc7
+NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
@@ -6,7 +6,7 @@ config ARM
 	select HAVE_DMA_API_DEBUG
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_DMA_ATTRS
-	select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
+	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
@@ -356,15 +356,15 @@ choice
 		  is nothing connected to read from the DCC.
 
 	config DEBUG_SEMIHOSTING
-		bool "Kernel low-level debug output via semihosting I"
+		bool "Kernel low-level debug output via semihosting I/O"
 		help
 		  Semihosting enables code running on an ARM target to use
 		  the I/O facilities on a host debugger/emulator through a
-		  simple SVC calls. The host debugger or emulator must have
+		  simple SVC call. The host debugger or emulator must have
 		  semihosting enabled for the special svc call to be trapped
 		  otherwise the kernel will crash.
 
-		  This is known to work with OpenOCD, as wellas
+		  This is known to work with OpenOCD, as well as
 		  ARM's Fast Models, or any other controlling environment
 		  that implements semihosting.
 

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
@@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-%.dtb:
+%.dtb: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-dtbs:
+dtbs: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
 # We use MRPROPER_FILES and CLEAN_FILES now

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
@@ -653,16 +653,21 @@ __armv7_mmu_cache_on:
 		mcrne	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
 #endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		bic	r0, r0, #1 << 28	@ clear SCTLR.TRE
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
 #ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
+		mrcne   p15, 0, r6, c2, c0, 2   @ read ttb control reg
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
+		bic     r6, r6, #1 << 31        @ 32-bit translation system
+		bic     r6, r6, #3 << 0         @ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
 #endif
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register

diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -104,6 +104,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff600 {
@@ -113,6 +114,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff800 {
@@ -122,6 +124,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@fffff200 {

diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -95,6 +95,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff400 {
@@ -104,6 +105,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff600 {
@@ -113,6 +115,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioD: gpio@fffff800 {
@@ -122,6 +125,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioE: gpio@fffffa00 {
@@ -131,6 +135,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@ffffee00 {

diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -15,7 +15,7 @@
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
 	};
 
 	ahb {

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -113,6 +113,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff400 {
@@ -122,6 +123,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff600 {
@@ -131,6 +133,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioD: gpio@fffff800 {
@@ -140,6 +143,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioE: gpio@fffffa00 {
@@ -149,6 +153,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@ffffee00 {

diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -107,6 +107,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff600 {
@@ -116,6 +117,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff800 {
@@ -125,6 +127,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioD: gpio@fffffa00 {
@@ -134,6 +137,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@fffff200 {

diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -115,6 +115,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff600 {
@@ -124,6 +125,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff800 {
@@ -133,6 +135,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioD: gpio@fffffa00 {
@@ -142,6 +145,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@fffff200 {

diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
@@ -33,7 +33,7 @@ CONFIG_AEABI=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 CONFIG_VFP=y

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
@@ -320,4 +320,12 @@
 	.size \name , . - \name
 	.endm
 
+	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+	adds	\tmp, \addr, #\size - 1
+	sbcccs	\tmp, \tmp, \limit
+	bcs	\bad
+#endif
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
@@ -202,6 +202,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
 	return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs);
 }
 
+/*
+ * This can be called during early boot to increase the size of the atomic
+ * coherent DMA pool above the default value of 256KiB. It must be called
+ * before postcore_initcall.
+ */
+extern void __init init_dma_coherent_pool_size(unsigned long size);
+
 /*
  * This can be called during boot to increase the size of the consistent
  * DMA region above it's default value of 2MB. It must be called before the

diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
@@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 #endif
 #endif
+#endif /* __ASSEMBLY__ */
 
 #ifndef PHYS_OFFSET
 #ifdef PLAT_PHYS_OFFSET
@@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #endif
 #endif
 
+#ifndef __ASSEMBLY__
+
 /*
  * PFNs are used to describe any physical page; this means
  * PFN 0 == physical address 0.

diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
@@ -199,13 +199,17 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 {
 	pgtable_page_dtor(pte);
 
+#ifdef CONFIG_ARM_LPAE
+	tlb_add_flush(tlb, addr);
+#else
 	/*
 	 * With the classic ARM MMU, a pte page has two corresponding pmd
 	 * entries, each covering 1MB.
 	 */
 	addr &= PMD_MASK;
 	tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
 	tlb_add_flush(tlb, addr + SZ_1M);
+#endif
 
 	tlb_remove_page(tlb, pte);
 }