---

yaml
---
r: 44829
b: refs/heads/master
c: 28cb5cc
h: refs/heads/master
i:
  44827: 116e8a3
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1f21782e63da81f56401a813a52091ef2703838f
+refs/heads/master: 28cb5ccd306e6cffd4498ba350bc7c82f5fbee44

trunk/Documentation/kernel-parameters.txt

@@ -1714,6 +1714,14 @@ and is between 256 and 4096 characters. It is defined in the file
 	uart6850=	[HW,OSS]
 			Format: <io>,<irq>
 
+	uhci-hcd.ignore_oc=
+			[USB] Ignore overcurrent events (default N).
+			Some badly-designed motherboards generate lots of
+			bogus events, for ports that aren't wired to
+			anything.  Set this parameter to avoid log spamming.
+			Note that genuine overcurrent events won't be
+			reported either.
+
 	usbhid.mousepoll=
 			[USBHID] The interval which mice are to be polled at.
 

trunk/Documentation/powerpc/booting-without-of.txt

@@ -1703,29 +1703,32 @@ platforms are moved over to use the flattened-device-tree model.
     Required properties:
 
      - device_type : has to be "rom"
-     - compatible : Should specify what this ROM device is compatible with
-       (i.e. "onenand"). Currently, this is most likely to be "direct-mapped"
-       (which corresponds to the MTD physmap mapping driver).
-     - regs : Offset and length of the register set (or memory mapping) for
+     - compatible : Should specify what this flash device is compatible with.
+       Currently, this is most likely to be "direct-mapped" (which
+       corresponds to the MTD physmap mapping driver).
+     - reg : Offset and length of the register set (or memory mapping) for
        the device.
+     - bank-width : Width of the flash data bus in bytes. Required
+       for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
 
     Recommended properties :
 
-     - bank-width : Width of the flash data bus in bytes. Required
-       for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
      - partitions : Several pairs of 32-bit values where the first value is
        partition's offset from the start of the device and the second one is
        partition size in bytes with LSB used to signify a read only
-       partititon (so, the parition size should always be an even number).
+       partition (so, the parition size should always be an even number).
      - partition-names : The list of concatenated zero terminated strings
        representing the partition names.
+     - probe-type : The type of probe which should be done for the chip
+       (JEDEC vs CFI actually). Valid ONLY for NOR flashes.
 
    Example:
 
  	flash@ff000000 {
  		device_type = "rom";
  		compatible = "direct-mapped";
- 		regs = <ff000000 01000000>;
+ 		probe-type = "CFI";
+ 		reg = <ff000000 01000000>;
  		bank-width = <4>;
  		partitions = <00000000 00f80000
  			      00f80000 00080001>;

trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -927,7 +927,7 @@
           <informalexample>
             <programlisting>
 <![CDATA[
-  struct mychip *chip = (struct mychip *)card->private_data;
+  struct mychip *chip = card->private_data;
 ]]>
             </programlisting>
           </informalexample>
@@ -1095,7 +1095,7 @@
 
           /* release the irq */
           if (chip->irq >= 0)
-                  free_irq(chip->irq, (void *)chip);
+                  free_irq(chip->irq, chip);
           /* release the i/o ports & memory */
           pci_release_regions(chip->pci);
           /* disable the PCI entry */
@@ -1148,7 +1148,7 @@
           }
           chip->port = pci_resource_start(pci, 0);
           if (request_irq(pci->irq, snd_mychip_interrupt,
-                          IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
+                          IRQF_SHARED, "My Chip", chip)) {
                   printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
                   snd_mychip_free(chip);
                   return -EBUSY;
@@ -1387,7 +1387,7 @@
           <programlisting>
 <![CDATA[
   if (chip->irq >= 0)
-          free_irq(chip->irq, (void *)chip);
+          free_irq(chip->irq, chip);
 ]]>
           </programlisting>
         </informalexample>

trunk/MAINTAINERS

@@ -3130,7 +3130,7 @@ USB EHCI DRIVER
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
 L:	linux-usb-devel@lists.sourceforge.net
-S:	Maintained
+S:	Odd Fixes
 
 USB ET61X[12]51 DRIVER
 P:	Luca Risolia
@@ -3183,11 +3183,11 @@ S:	Maintained
 W:	http://www.one-eyed-alien.net/~mdharm/linux-usb/
 
 USB OHCI DRIVER
-P:	Roman Weissgaerber
-M:	weissg@vienna.at
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
 L:	linux-usb-users@lists.sourceforge.net
 L:	linux-usb-devel@lists.sourceforge.net
-S:	Maintained
+S:	Odd Fixes
 
 USB OPTION-CARD DRIVER
 P:	Matthias Urlichs