---

yaml
---
r: 201295
b: refs/heads/master
c: accd846
h: refs/heads/master
i:
  201293: 8915b79
  201291: 76415eb
  201287: e0a1563
  201279: 3ecf220
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 863da9557e5ad2874f3fc6f350b392e03f983ca4
+refs/heads/master: accd846698439ba18250e8fd5681af280446b853

trunk/arch/arm/mach-clps711x/include/mach/debug-macro.S

@@ -11,7 +11,6 @@
  *
 */
 
-#include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
 		.macro	addruart, rx, tmp

trunk/arch/arm/mach-footbridge/common.c

@@ -232,7 +232,7 @@ EXPORT_SYMBOL(__bus_to_virt);
 
 unsigned long __pfn_to_bus(unsigned long pfn)
 {
-	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
+	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
 }
 EXPORT_SYMBOL(__pfn_to_bus);
 

trunk/arch/arm/mach-h720x/include/mach/debug-macro.S

@@ -11,10 +11,8 @@
  *
 */
 
-#include <mach/hardware.h>
-
-		.equ    io_virt, IO_VIRT
-		.equ    io_phys, IO_PHYS
+		.equ    io_virt, IO_BASE
+		.equ    io_phys, IO_START
 
 		.macro  addruart, rx, tmp
 		mrc     p15, 0, \rx, c1, c0

trunk/arch/arm/mach-kirkwood/tsx1x-common.c

@@ -77,7 +77,7 @@ struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
 	},
 };
 
-void __init qnap_tsx1x_register_flash(void)
+void qnap_tsx1x_register_flash(void)
 {
 	spi_register_board_info(qnap_tsx1x_spi_slave_info,
 				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));

trunk/arch/arm/mach-kirkwood/tsx1x-common.h

@@ -1,7 +1,7 @@
 #ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
 #define __ARCH_KIRKWOOD_TSX1X_COMMON_H
 
-extern void __init qnap_tsx1x_register_flash(void);
+extern void qnap_tsx1x_register_flash(void);
 extern void qnap_tsx1x_power_off(void);
 
 #endif

trunk/arch/arm/mach-ns9xxx/include/mach/debug-macro.S

@@ -8,7 +8,6 @@
  * the Free Software Foundation.
  */
 #include <mach/hardware.h>
-#include <asm/memory.h>
 
 #include <mach/regs-board-a9m9750dev.h>
 

trunk/arch/arm/mach-ns9xxx/include/mach/uncompress.h

@@ -20,49 +20,50 @@ static void putc_dummy(char c, void __iomem *base)
 	/* nothing */
 }
 
-static int timeout;
-
 static void putc_ns9360(char c, void __iomem *base)
 {
+	static int t = 0x10000;
 	do {
-		if (timeout)
-			--timeout;
+		if (t)
+			--t;
 
 		if (__raw_readl(base + 8) & (1 << 3)) {
 			__raw_writeb(c, base + 16);
-			timeout = 0x10000;
+			t = 0x10000;
 			break;
 		}
-	} while (timeout);
+	} while (t);
 }
 
 static void putc_a9m9750dev(char c, void __iomem *base)
 {
+	static int t = 0x10000;
 	do {
-		if (timeout)
-			--timeout;
+		if (t)
+			--t;
 
 		if (__raw_readb(base + 5) & (1 << 5)) {
 			__raw_writeb(c, base);
-			timeout = 0x10000;
+			t = 0x10000;
 			break;
 		}
-	} while (timeout);
+	} while (t);
 
 }
 
 static void putc_ns921x(char c, void __iomem *base)
 {
+	static int t = 0x10000;
 	do {
-		if (timeout)
-			--timeout;
+		if (t)
+			--t;
 
 		if (!(__raw_readl(base) & (1 << 11))) {
 			__raw_writeb(c, base + 0x0028);
-			timeout = 0x10000;
+			t = 0x10000;
 			break;
 		}
-	} while (timeout);
+	} while (t);
 }
 
 #define MSCS __REG(0xA0900184)
@@ -88,7 +89,6 @@ static void putc_ns921x(char c, void __iomem *base)
 
 static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
 {
-	timeout = 0x10000;
 	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
 		/* ns9360 or ns9750 */
 		if (NS9360_UART_ENABLED(NS9360_UARTA)) {

trunk/arch/arm/mach-pxa/colibri-pxa300.c

@@ -26,7 +26,6 @@
 #include <mach/colibri.h>
 #include <mach/ohci.h>
 #include <mach/pxafb.h>
-#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -146,7 +145,7 @@ static void __init colibri_pxa300_init_lcd(void)
 static inline void colibri_pxa300_init_lcd(void) {}
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
+#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
 static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
 	GPIO24_AC97_SYSCLK,
 	GPIO23_AC97_nACRESET,

trunk/arch/arm/mach-pxa/corgi.c

@@ -446,7 +446,7 @@ static struct platform_device corgiled_device = {
 static struct pxamci_platform_data corgi_mci_platform_data = {
 	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= CORGI_GPIO_nSD_DETECT,
+	.gpio_card_detect	= -1,
 	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
 	.gpio_power		= CORGI_GPIO_SD_PWR,
 };

trunk/arch/arm/mach-pxa/cpufreq-pxa2xx.c

@@ -256,9 +256,13 @@ static void init_sdram_rows(void)
 
 static u32 mdrefr_dri(unsigned int freq)
 {
-	u32 interval = freq * SDRAM_TREF / sdram_rows;
+	u32 dri = 0;
 
-	return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
+	if (cpu_is_pxa25x())
+		dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
+	if (cpu_is_pxa27x())
+		dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
+	return dri;
 }
 
 /* find a valid frequency point */

trunk/arch/arm/mach-pxa/pxa27x.c

@@ -41,10 +41,10 @@ void pxa27x_clear_otgph(void)
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
 static unsigned long ac97_reset_config[] = {
-	GPIO113_GPIO,
-	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
 	GPIO95_AC97_nRESET,
+	GPIO95_GPIO,
+	GPIO113_AC97_nRESET,
+	GPIO113_GPIO,
 };
 
 void pxa27x_assert_ac97reset(int reset_gpio, int on)

trunk/arch/arm/mach-shark/include/mach/debug-macro.S

@@ -20,9 +20,6 @@
 		strb	\rd, [\rx]
 		.endm
 
-		.macro waituart,rd,rx
-		.endm
-
 		.macro	busyuart,rd,rx
 		mov	\rd, #0
 1001:		add	\rd, \rd, #1

trunk/arch/arm/mach-w90x900/cpu.c

@@ -93,7 +93,7 @@ static struct clk_lookup nuc900_clkregs[] = {
 	DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
 	DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
 	DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
-	DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL),
+	DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
 	DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
 	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
 	DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),

trunk/arch/arm/plat-spear/include/plat/debug-macro.S

@@ -17,8 +17,8 @@
 		.macro	addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1					@ MMU enabled?
-		moveq	\rx, #SPEAR_DBG_UART_BASE		@ Physical base
-		movne	\rx, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
+		moveq	\rx, =SPEAR_DBG_UART_BASE		@ Physical base
+		movne	\rx, =VA_SPEAR_DBG_UART_BASE		@ Virtual base
 		.endm
 
 		.macro	senduart, rd, rx

trunk/arch/avr32/include/asm/ioctls.h

@@ -54,9 +54,6 @@
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
 
-#define TIOCGRS485      0x542E
-#define TIOCSRS485      0x542F
-
 #define FIONCLEX	0x5450
 #define FIOCLEX		0x5451
 #define FIOASYNC	0x5452

trunk/arch/avr32/mach-at32ap/include/mach/board.h

@@ -5,7 +5,6 @@
 #define __ASM_ARCH_BOARD_H
 
 #include <linux/types.h>
-#include <linux/serial.h>
 
 #define GPIO_PIN_NONE	(-1)
 
@@ -36,7 +35,6 @@ struct atmel_uart_data {
 	short		use_dma_tx;	/* use transmit DMA? */
 	short		use_dma_rx;	/* use receive DMA? */
 	void __iomem	*regs;		/* virtual base address, if any */
-	struct serial_rs485	rs485;		/* rs485 settings */
 };
 void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
 struct platform_device *at32_add_device_usart(unsigned int id);

trunk/arch/mips/alchemy/common/platform.c

@@ -435,21 +435,20 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 static int __init au1xxx_platform_init(void)
 {
 	unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
-	int err, i;
+	int i;
 
 	/* Fill up uartclk. */
 	for (i = 0; au1x00_uart_data[i].flags; i++)
 		au1x00_uart_data[i].uartclk = uartclk;
 
-	err = platform_add_devices(au1xxx_platform_devices,
-				   ARRAY_SIZE(au1xxx_platform_devices));
 #ifndef CONFIG_SOC_AU1100
 	/* Register second MAC if enabled in pinfunc */
-	if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
+	if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
 		platform_device_register(&au1xxx_eth1_device);
 #endif
 
-	return err;
+	return platform_add_devices(au1xxx_platform_devices,
+				    ARRAY_SIZE(au1xxx_platform_devices));
 }
 
 arch_initcall(au1xxx_platform_init);

trunk/arch/mips/alchemy/mtx-1/board_setup.c

@@ -67,6 +67,8 @@ static void mtx1_power_off(void)
 
 void __init board_setup(void)
 {
+	alchemy_gpio2_enable();
+
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	/* Enable USB power switch */
 	alchemy_gpio_direction_output(204, 0);
@@ -115,11 +117,11 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
 
 	if (assert && devsel != 0)
 		/* Suppress signal to Cardbus */
-		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
+		gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
 	else
-		alchemy_gpio_set_value(1, 1);	/* set EXT_IO3 ON */
+		gpio_set_value(1, 1);	/* set EXT_IO3 ON */
 
-	udelay(1);
+	au_sync_udelay(1);
 	return 1;
 }
 

trunk/arch/mips/bcm63xx/dev-enet.c

@@ -104,9 +104,6 @@ int __init bcm63xx_enet_register(int unit,
 	if (unit > 1)
 		return -ENODEV;
 
-	if (unit == 1 && BCMCPU_IS_6338())
-		return -ENODEV;
-
 	if (!shared_device_registered) {
 		shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
 		shared_res[0].end = shared_res[0].start;

trunk/arch/mips/include/asm/atomic.h

@@ -434,7 +434,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
-		"	daddu	%0, %2					\n"
+		"	addu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqzl	%0, 1b					\n"
 		"	.set	mips0					\n"
@@ -446,7 +446,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
-		"	daddu	%0, %2					\n"
+		"	addu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqz	%0, 2f					\n"
 		"	.subsection 2					\n"
@@ -479,7 +479,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
-		"	dsubu	%0, %2					\n"
+		"	subu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqzl	%0, 1b					\n"
 		"	.set	mips0					\n"
@@ -491,7 +491,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
-		"	dsubu	%0, %2					\n"
+		"	subu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqz	%0, 2f					\n"
 		"	.subsection 2					\n"
@@ -524,10 +524,10 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
-		"	daddu	%0, %1, %3				\n"
+		"	addu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqzl	%0, 1b					\n"
-		"	daddu	%0, %1, %3				\n"
+		"	addu	%0, %1, %3				\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
@@ -538,10 +538,10 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
-		"	daddu	%0, %1, %3				\n"
+		"	addu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqz	%0, 2f					\n"
-		"	daddu	%0, %1, %3				\n"
+		"	addu	%0, %1, %3				\n"
 		"	.subsection 2					\n"
 		"2:	b	1b					\n"
 		"	.previous					\n"
@@ -576,10 +576,10 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
-		"	dsubu	%0, %1, %3				\n"
+		"	subu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqzl	%0, 1b					\n"
-		"	dsubu	%0, %1, %3				\n"
+		"	subu	%0, %1, %3				\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
@@ -590,10 +590,10 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
-		"	dsubu	%0, %1, %3				\n"
+		"	subu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqz	%0, 2f					\n"
-		"	dsubu	%0, %1, %3				\n"
+		"	subu	%0, %1, %3				\n"
 		"	.subsection 2					\n"
 		"2:	b	1b					\n"
 		"	.previous					\n"