---

yaml
---
r: 232752
b: refs/heads/master
c: 5766d20
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 7f2a06deaa22104a4cf4c0cc3d7c44c7e3228ef3
+refs/heads/master: 5766d204ae6c1f54beaef37a18c3c9b5e32c3b16

trunk/drivers/staging/lirc/lirc_zilog.c

@@ -495,23 +495,35 @@ static int send_data_block(struct IR_tx *tx, unsigned char *data_block)
 /* send boot data to the IR TX device */
 static int send_boot_data(struct IR_tx *tx)
 {
-	int ret;
+	int ret, i;
 	unsigned char buf[4];
 
 	/* send the boot block */
 	ret = send_data_block(tx, tx_data->boot_data);
 	if (ret != 0)
 		return ret;
 
-	/* kick it off? */
+	/* Hit the go button to activate the new boot data */
 	buf[0] = 0x00;
 	buf[1] = 0x20;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
 		zilog_error("i2c_master_send failed with %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
-	ret = i2c_master_send(tx->c, buf, 1);
+
+	/*
+	 * Wait for zilog to settle after hitting go post boot block upload.
+	 * Without this delay, the HD-PVR and HVR-1950 both return an -EIO
+	 * upon attempting to get firmware revision, and tx probe thus fails.
+	 */
+	for (i = 0; i < 10; i++) {
+		ret = i2c_master_send(tx->c, buf, 1);
+		if (ret == 1)
+			break;
+		udelay(100);
+	}
+
 	if (ret != 1) {
 		zilog_error("i2c_master_send failed with %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
@@ -523,8 +535,8 @@ static int send_boot_data(struct IR_tx *tx)
 		zilog_error("i2c_master_recv failed with %d\n", ret);
 		return 0;
 	}
-	if (buf[0] != 0x80) {
-		zilog_error("unexpected IR TX response: %02x\n", buf[0]);
+	if ((buf[0] != 0x80) && (buf[0] != 0xa0)) {
+		zilog_error("unexpected IR TX init response: %02x\n", buf[0]);
 		return 0;
 	}
 	zilog_notify("Zilog/Hauppauge IR blaster firmware version "
@@ -827,7 +839,15 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
 		zilog_error("i2c_master_send failed with %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
-	ret = i2c_master_send(tx->c, buf, 1);
+
+	/* Give the z8 a moment to process data block */
+	for (i = 0; i < 10; i++) {
+		ret = i2c_master_send(tx->c, buf, 1);
+		if (ret == 1)
+			break;
+		udelay(100);
+	}
+
 	if (ret != 1) {
 		zilog_error("i2c_master_send failed with %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;