---

yaml
---
r: 330303
b: refs/heads/master
c: 9a5d5bd
h: refs/heads/master
i:
  330301: fd113b1
  330299: 5883e2a
  330295: d18d2e1
  330287: 365de8c
  330271: fa2fecd
  330239: b0d3009
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6b5e7229bbd59f0cfce7015fd46736fc93d8c8c3
+refs/heads/master: 9a5d5bd8480068c5829e3d997ee21dab9b3ed05f

trunk/Documentation/ABI/testing/sysfs-bus-pci

@@ -210,3 +210,15 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.

trunk/Documentation/feature-removal-schedule.txt

@@ -579,7 +579,7 @@ Why:	KVM tracepoints provide mostly equivalent information in a much more
 ----------------------------
 
 What:	at91-mci driver ("CONFIG_MMC_AT91")
-When:	3.7
+When:	3.8
 Why:	There are two mci drivers: at91-mci and atmel-mci. The PDC support
 	was added to atmel-mci as a first step to support more chips.
 	Then at91-mci was kept only for old IP versions (on at91rm9200 and

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -6,7 +6,7 @@ config ARM
 	select HAVE_DMA_API_DEBUG
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_DMA_ATTRS
-	select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
+	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION

trunk/arch/arm/boot/dts/at91sam9g25ek.dts

@@ -15,7 +15,7 @@
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
 	};
 
 	ahb {

trunk/arch/arm/configs/armadillo800eva_defconfig

@@ -33,7 +33,7 @@ CONFIG_AEABI=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 CONFIG_VFP=y

trunk/arch/arm/include/asm/dma-mapping.h

@@ -202,6 +202,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
 	return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs);
 }
 
+/*
+ * This can be called during early boot to increase the size of the atomic
+ * coherent DMA pool above the default value of 256KiB. It must be called
+ * before postcore_initcall.
+ */
+extern void __init init_dma_coherent_pool_size(unsigned long size);
+
 /*
  * This can be called during boot to increase the size of the consistent
  * DMA region above it's default value of 2MB. It must be called before the

trunk/arch/arm/mach-at91/at91rm9200_time.c

@@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void)
 	at91_st_read(AT91_ST_SR);
 
 	/* Make IRQs happen for the system timer */
-	setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
+	setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
 
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
 	 * directly for the clocksource and all clockevents, after adjusting

trunk/arch/arm/mach-at91/at91sam9260_devices.c

@@ -726,6 +726,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	},
 };
 
@@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9260_rtt_device.num_resources = 2;
+	at91sam9260_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

trunk/arch/arm/mach-at91/at91sam9261_devices.c

@@ -609,6 +609,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9261_rtt_device.num_resources = 2;
+	at91sam9261_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

trunk/arch/arm/mach-at91/at91sam9263_devices.c

@@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void)
 		 * The second resource is needed only for the chosen RTT:
 		 * GPBR will serve as the storage for RTC time offset
 		 */
-		at91sam9263_rtt0_device.num_resources = 2;
+		at91sam9263_rtt0_device.num_resources = 3;
 		at91sam9263_rtt1_device.num_resources = 1;
 		pdev = &at91sam9263_rtt0_device;
 		r = rtt0_resources;
 		break;
 	case 1:
 		at91sam9263_rtt0_device.num_resources = 1;
-		at91sam9263_rtt1_device.num_resources = 2;
+		at91sam9263_rtt1_device.num_resources = 3;
 		pdev = &at91sam9263_rtt1_device;
 		r = rtt1_resources;
 		break;
@@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void)
 	pdev->name = "rtc-at91sam9";
 	r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	r[1].end = r[1].start + 3;
+	r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

trunk/arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9g45_rtt_device.num_resources = 2;
+	at91sam9g45_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

trunk/arch/arm/mach-at91/at91sam9rl_devices.c

@@ -688,6 +688,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9rl_rtt_device.num_resources = 2;
+	at91sam9rl_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

trunk/arch/arm/mach-at91/clock.c

@@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
 
 #define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
+#define cpu_has_240M_plla()	(cpu_is_at91sam9261() \
+				|| cpu_is_at91sam9263() \
+				|| cpu_is_at91sam9rl())
+
+#define cpu_has_210M_plla()	(cpu_is_at91sam9260())
+
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45() \
 				|| cpu_is_at91sam9x5() \
@@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock)
 	} else if (cpu_has_800M_plla()) {
 		if (plla.rate_hz > 800000000)
 			pll_overclock = true;
+	} else if (cpu_has_240M_plla()) {
+		if (plla.rate_hz > 240000000)
+			pll_overclock = true;
+	} else if (cpu_has_210M_plla()) {
+		if (plla.rate_hz > 210000000)
+			pll_overclock = true;
 	} else {
 		if (plla.rate_hz > 209000000)
 			pll_overclock = true;

trunk/arch/arm/mach-gemini/irq.c

@@ -17,6 +17,7 @@
 #include <linux/sched.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
+#include <asm/system_misc.h>
 #include <mach/hardware.h>
 
 #define IRQ_SOURCE(base_addr)	(base_addr + 0x00)

trunk/arch/arm/mach-kirkwood/common.c

@@ -517,6 +517,13 @@ void __init kirkwood_wdt_init(void)
 void __init kirkwood_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
+
+	/*
+	 * Some Kirkwood devices allocate their coherent buffers from atomic
+	 * context. Increase size of atomic coherent pool to make sure such
+	 * the allocations won't fail.
+	 */
+	init_dma_coherent_pool_size(SZ_1M);
 }
 
 int kirkwood_tclk;

trunk/arch/arm/mach-kirkwood/db88f6281-bp-setup.c

@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/sizes.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>

trunk/arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -520,13 +520,14 @@ static struct platform_device hdmi_lcdc_device = {
 };
 
 /* GPIO KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+#define GPIO_KEY(c, g, d, ...) \
+	{ .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
 
 static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW1"),
-	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW2"),
-	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW3"),
-	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW4"),
+	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW3", .wakeup = 1),
+	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW4"),
+	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW5"),
+	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW6"),
 };
 
 static struct gpio_keys_platform_data gpio_key_info = {
@@ -901,8 +902,8 @@ static struct platform_device *eva_devices[] __initdata = {
 	&camera_device,
 	&ceu0_device,
 	&fsi_device,
-	&fsi_hdmi_device,
 	&fsi_wm8978_device,
+	&fsi_hdmi_device,
 };
 
 static void __init eva_clock_init(void)

trunk/arch/arm/mach-shmobile/board-mackerel.c

@@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = {
  *  - J30 "open"
  *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
  *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
+ *  - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices.
  */
 #define IRQ8 evt2irq(0x0300)
 #define USB_PHY_MODE		(1 << 4)
@@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usbhs1_device,
 	&usbhs0_device,
+	&usbhs1_device,
 	&leds_device,
 	&fsi_device,
 	&fsi_ak4643_device,

trunk/arch/arm/mach-shmobile/board-marzen.c

@@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = {
 
 static struct platform_device eth_device = {
 	.name		= "smsc911x",
-	.id		= 0,
+	.id		= -1,
 	.dev  = {
 		.platform_data = &smsc911x_platdata,
 	},

trunk/arch/arm/mach-shmobile/intc-sh73a0.c

@@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
 	return 0; /* always allow wakeup */
 }
 
-#define RELOC_BASE 0x1000
+#define RELOC_BASE 0x1200
 
-/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
+/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */
 #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
 
 INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,

trunk/arch/arm/mach-tegra/pcie.c

@@ -367,17 +367,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
 /* Tegra PCIE requires relaxed ordering */
 static void __devinit tegra_pcie_relax_enable(struct pci_dev *dev)
 {
-	u16 val16;
-	int pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-
-	if (pos <= 0) {
-		dev_err(&dev->dev, "skipping relaxed ordering fixup\n");
-		return;
-	}
-
-	pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &val16);
-	val16 |= PCI_EXP_DEVCTL_RELAX_EN;
-	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, val16);
+	pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);