ARM: tegra: Add support for Tegra USB PHYs

Interface used by Tegra's gadget driver and ehci driver
to power on and configure the USB PHYs.

Signed-off-by: Benoit Goby <benoit@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

arch/arm/mach-tegra/Kconfig

@@ -10,6 +10,9 @@ config ARCH_TEGRA_2x_SOC
 	select CPU_V7
 	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select USB_ULPI if USB_SUPPORT
+	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller

arch/arm/mach-tegra/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o
 obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
+obj-$(CONFIG_USB_SUPPORT)		+= usb_phy.o
 
 obj-${CONFIG_MACH_HARMONY}              += board-harmony.o
 obj-${CONFIG_MACH_HARMONY}              += board-harmony-pinmux.o

arch/arm/mach-tegra/include/mach/usb_phy.h

@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-tegra/include/mach/usb_phy.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_USB_PHY_H
+#define __MACH_USB_PHY_H
+
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+
+struct tegra_utmip_config {
+	u8 hssync_start_delay;
+	u8 elastic_limit;
+	u8 idle_wait_delay;
+	u8 term_range_adj;
+	u8 xcvr_setup;
+	u8 xcvr_lsfslew;
+	u8 xcvr_lsrslew;
+};
+
+struct tegra_ulpi_config {
+	int reset_gpio;
+	const char *clk;
+};
+
+enum tegra_usb_phy_port_speed {
+	TEGRA_USB_PHY_PORT_SPEED_FULL = 0,
+	TEGRA_USB_PHY_PORT_SPEED_LOW,
+	TEGRA_USB_PHY_PORT_SPEED_HIGH,
+};
+
+enum tegra_usb_phy_mode {
+	TEGRA_USB_PHY_MODE_DEVICE,
+	TEGRA_USB_PHY_MODE_HOST,
+};
+
+struct tegra_xtal_freq;
+
+struct tegra_usb_phy {
+	int instance;
+	const struct tegra_xtal_freq *freq;
+	void __iomem *regs;
+	void __iomem *pad_regs;
+	struct clk *clk;
+	struct clk *pll_u;
+	struct clk *pad_clk;
+	enum tegra_usb_phy_mode mode;
+	void *config;
+	struct otg_transceiver *ulpi;
+};
+
+struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
+			void *config, enum tegra_usb_phy_mode phy_mode);
+
+int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_power_off(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_preresume(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_postresume(struct tegra_usb_phy *phy);
+
+void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
+				 enum tegra_usb_phy_port_speed port_speed);
+
+void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_close(struct tegra_usb_phy *phy);
+
+#endif /* __MACH_USB_PHY_H */