---

yaml
---
r: 258166
b: refs/heads/master
c: 8021a4a
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 4348810a241a330d3d143d62d7c988ec8b2e6629
+refs/heads/master: 8021a4a048a85906302bd0236f3d125473be65b1

trunk/Documentation/filesystems/proc.txt

@@ -843,6 +843,7 @@ Provides counts of softirq handlers serviced since boot time, for each cpu.
  TASKLET:          0          0          0        290
    SCHED:      27035      26983      26971      26746
  HRTIMER:          0          0          0          0
+     RCU:       1678       1769       2178       2250
 
 
 1.3 IDE devices in /proc/ide

trunk/Documentation/power/devices.txt

@@ -520,59 +520,20 @@ Support for power domains is provided through the pwr_domain field of struct
 device.  This field is a pointer to an object of type struct dev_power_domain,
 defined in include/linux/pm.h, providing a set of power management callbacks
 analogous to the subsystem-level and device driver callbacks that are executed
-for the given device during all power transitions, in addition to the respective
-subsystem-level callbacks.  Specifically, the power domain "suspend" callbacks
-(i.e. ->runtime_suspend(), ->suspend(), ->freeze(), ->poweroff(), etc.) are
-executed after the analogous subsystem-level callbacks, while the power domain
-"resume" callbacks (i.e. ->runtime_resume(), ->resume(), ->thaw(), ->restore,
-etc.) are executed before the analogous subsystem-level callbacks.  Error codes
-returned by the "suspend" and "resume" power domain callbacks are ignored.
-
-Power domain ->runtime_idle() callback is executed before the subsystem-level
-->runtime_idle() callback and the result returned by it is not ignored.  Namely,
-if it returns error code, the subsystem-level ->runtime_idle() callback will not
-be called and the helper function rpm_idle() executing it will return error
-code.  This mechanism is intended to help platforms where saving device state
-is a time consuming operation and should only be carried out if all devices
-in the power domain are idle, before turning off the shared power resource(s).
-Namely, the power domain ->runtime_idle() callback may return error code until
-the pm_runtime_idle() helper (or its asychronous version) has been called for
-all devices in the power domain (it is recommended that the returned error code
-be -EBUSY in those cases), preventing the subsystem-level ->runtime_idle()
-callback from being run prematurely.
-
-The support for device power domains is only relevant to platforms needing to
-use the same subsystem-level (e.g. platform bus type) and device driver power
-management callbacks in many different power domain configurations and wanting
-to avoid incorporating the support for power domains into the subsystem-level
-callbacks.  The other platforms need not implement it or take it into account
-in any way.
-
-
-System Devices
---------------
-System devices (sysdevs) follow a slightly different API, which can be found in
-
-	include/linux/sysdev.h
-	drivers/base/sys.c
-
-System devices will be suspended with interrupts disabled, and after all other
-devices have been suspended.  On resume, they will be resumed before any other
-devices, and also with interrupts disabled.  These things occur in special
-"sysdev_driver" phases, which affect only system devices.
-
-Thus, after the suspend_noirq (or freeze_noirq or poweroff_noirq) phase, when
-the non-boot CPUs are all offline and IRQs are disabled on the remaining online
-CPU, then a sysdev_driver.suspend phase is carried out, and the system enters a
-sleep state (or a system image is created).  During resume (or after the image
-has been created or loaded) a sysdev_driver.resume phase is carried out, IRQs
-are enabled on the only online CPU, the non-boot CPUs are enabled, and the
-resume_noirq (or thaw_noirq or restore_noirq) phase begins.
-
-Code to actually enter and exit the system-wide low power state sometimes
-involves hardware details that are only known to the boot firmware, and
-may leave a CPU running software (from SRAM or flash memory) that monitors
-the system and manages its wakeup sequence.
+for the given device during all power transitions, instead of the respective
+subsystem-level callbacks.  Specifically, if a device's pm_domain pointer is
+not NULL, the ->suspend() callback from the object pointed to by it will be
+executed instead of its subsystem's (e.g. bus type's) ->suspend() callback and
+anlogously for all of the remaining callbacks.  In other words, power management
+domain callbacks, if defined for the given device, always take precedence over
+the callbacks provided by the device's subsystem (e.g. bus type).
+
+The support for device power management domains is only relevant to platforms
+needing to use the same device driver power management callbacks in many
+different power domain configurations and wanting to avoid incorporating the
+support for power domains into subsystem-level callbacks, for example by
+modifying the platform bus type.  Other platforms need not implement it or take
+it into account in any way.
 
 
 Device Low Power (suspend) States

trunk/Documentation/power/runtime_pm.txt

@@ -566,11 +566,6 @@ to do this is:
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 
-The PM core always increments the run-time usage counter before calling the
-->prepare() callback and decrements it after calling the ->complete() callback.
-Hence disabling run-time PM temporarily like this will not cause any run-time
-suspend callbacks to be lost.
-
 7. Generic subsystem callbacks
 
 Subsystems may wish to conserve code space by using the set of generic power

trunk/Documentation/usb/error-codes.txt

@@ -76,6 +76,13 @@ A transfer's actual_length may be positive even when an error has been
 reported.  That's because transfers often involve several packets, so that
 one or more packets could finish before an error stops further endpoint I/O.
 
+For isochronous URBs, the urb status value is non-zero only if the URB is
+unlinked, the device is removed, the host controller is disabled, or the total
+transferred length is less than the requested length and the URB_SHORT_NOT_OK
+flag is set.  Completion handlers for isochronous URBs should only see
+urb->status set to zero, -ENOENT, -ECONNRESET, -ESHUTDOWN, or -EREMOTEIO.
+Individual frame descriptor status fields may report more status codes.
+
 
 0			Transfer completed successfully
 
@@ -132,7 +139,7 @@ one or more packets could finish before an error stops further endpoint I/O.
 			device removal events immediately.
 
 -EXDEV			ISO transfer only partially completed
-			look at individual frame status for details
+			(only set in iso_frame_desc[n].status, not urb->status)
 
 -EINVAL			ISO madness, if this happens: Log off and go home
 

trunk/MAINTAINERS

@@ -2291,8 +2291,7 @@ F:	drivers/scsi/eata_pio.*
 
 EBTABLES
 M:	Bart De Schuymer <bart.de.schuymer@pandora.be>
-L:	ebtables-user@lists.sourceforge.net
-L:	ebtables-devel@lists.sourceforge.net
+L:	netfilter-devel@vger.kernel.org
 W:	http://ebtables.sourceforge.net/
 S:	Maintained
 F:	include/linux/netfilter_bridge/ebt_*.h
@@ -6435,8 +6434,9 @@ S:	Maintained
 F:	drivers/usb/misc/rio500*
 
 USB EHCI DRIVER
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
@@ -6463,9 +6463,15 @@ M:	Jiri Kosina <jkosina@suse.cz>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
-F:	Documentation/usb/hiddev.txt
+F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/
 
+USB/IP DRIVERS
+M:	Matt Mooney <mfm@muteddisk.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/staging/usbip/
+
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
@@ -6495,8 +6501,9 @@ S:	Maintained
 F:	sound/usb/midi.*
 
 USB OHCI DRIVER
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 
@@ -7007,6 +7014,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.
 S:	Maintained
 F:	drivers/platform/x86
 
+X86 MCE INFRASTRUCTURE
+M:	Tony Luck <tony.luck@intel.com>
+M:	Borislav Petkov <bp@amd64.org>
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	arch/x86/kernel/cpu/mcheck/*
+
 XEN HYPERVISOR INTERFACE
 M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Sneaky Weasel
 
 # *DOCUMENTATION*

trunk/arch/alpha/include/asm/mmzone.h

@@ -56,7 +56,6 @@ PLAT_NODE_DATA_LOCALNR(unsigned long p, int n)
  * Given a kernel address, find the home node of the underlying memory.
  */
 #define kvaddr_to_nid(kaddr)	pa_to_nid(__pa(kaddr))
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
 
 /*
  * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory

trunk/arch/arm/boot/compressed/head.S

@@ -597,6 +597,8 @@ __common_mmu_cache_on:
 		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
 #endif
 
+#define PROC_ENTRY_SIZE (4*5)
+
 /*
  * Here follow the relocatable cache support functions for the
  * various processors.  This is a generic hook for locating an
@@ -624,7 +626,7 @@ call_cache_fn:	adr	r12, proc_types
  ARM(		addeq	pc, r12, r3		) @ call cache function
  THUMB(		addeq	r12, r3			)
  THUMB(		moveq	pc, r12			) @ call cache function
-		add	r12, r12, #4*5
+		add	r12, r12, #PROC_ENTRY_SIZE
 		b	1b
 
 /*
@@ -794,6 +796,16 @@ proc_types:
 
 		.size	proc_types, . - proc_types
 
+		/*
+		 * If you get a "non-constant expression in ".if" statement"
+		 * error from the assembler on this line, check that you have
+		 * not accidentally written a "b" instruction where you should
+		 * have written W(b).
+		 */
+		.if (. - proc_types) % PROC_ENTRY_SIZE != 0
+		.error "The size of one or more proc_types entries is wrong."
+		.endif
+
 /*
  * Turn off the Cache and MMU.  ARMv3 does not support
  * reading the control register, but ARMv4 does.

trunk/arch/arm/common/dmabounce.c

@@ -255,7 +255,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
 		if (buf == 0) {
 			dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
 			       __func__, ptr);
-			return 0;
+			return ~0;
 		}
 
 		dev_dbg(dev,
@@ -328,34 +328,6 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr,
  * substitute the safe buffer for the unsafe one.
  * (basically move the buffer from an unsafe area to a safe one)
  */
-dma_addr_t __dma_map_single(struct device *dev, void *ptr, size_t size,
-		enum dma_data_direction dir)
-{
-	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
-		__func__, ptr, size, dir);
-
-	BUG_ON(!valid_dma_direction(dir));
-
-	return map_single(dev, ptr, size, dir);
-}
-EXPORT_SYMBOL(__dma_map_single);
-
-/*
- * see if a mapped address was really a "safe" buffer and if so, copy
- * the data from the safe buffer back to the unsafe buffer and free up
- * the safe buffer.  (basically return things back to the way they
- * should be)
- */
-void __dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		enum dma_data_direction dir)
-{
-	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
-		__func__, (void *) dma_addr, size, dir);
-
-	unmap_single(dev, dma_addr, size, dir);
-}
-EXPORT_SYMBOL(__dma_unmap_single);
-
 dma_addr_t __dma_map_page(struct device *dev, struct page *page,
 		unsigned long offset, size_t size, enum dma_data_direction dir)
 {

trunk/arch/arm/include/asm/assembler.h

@@ -13,6 +13,9 @@
  *  Do not include any C declarations in this file - it is included by
  *  assembler source.
  */
+#ifndef __ASM_ASSEMBLER_H__
+#define __ASM_ASSEMBLER_H__
+
 #ifndef __ASSEMBLY__
 #error "Only include this from assembly code"
 #endif
@@ -290,3 +293,4 @@
 	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
 	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort
 	.endm
+#endif /* __ASM_ASSEMBLER_H__ */

trunk/arch/arm/include/asm/dma-mapping.h

@@ -298,10 +298,6 @@ extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
 /*
  * The DMA API, implemented by dmabounce.c.  See below for descriptions.
  */
-extern dma_addr_t __dma_map_single(struct device *, void *, size_t,
-		enum dma_data_direction);
-extern void __dma_unmap_single(struct device *, dma_addr_t, size_t,
-		enum dma_data_direction);
 extern dma_addr_t __dma_map_page(struct device *, struct page *,
 		unsigned long, size_t, enum dma_data_direction);
 extern void __dma_unmap_page(struct device *, dma_addr_t, size_t,
@@ -328,26 +324,13 @@ static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr,
 }
 
 
-static inline dma_addr_t __dma_map_single(struct device *dev, void *cpu_addr,
-		size_t size, enum dma_data_direction dir)
-{
-	__dma_single_cpu_to_dev(cpu_addr, size, dir);
-	return virt_to_dma(dev, cpu_addr);
-}
-
 static inline dma_addr_t __dma_map_page(struct device *dev, struct page *page,
 	     unsigned long offset, size_t size, enum dma_data_direction dir)
 {
 	__dma_page_cpu_to_dev(page, offset, size, dir);
 	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
 }
 
-static inline void __dma_unmap_single(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir)
-{
-	__dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir);
-}
-
 static inline void __dma_unmap_page(struct device *dev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir)
 {
@@ -373,14 +356,18 @@ static inline void __dma_unmap_page(struct device *dev, dma_addr_t handle,
 static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
 		size_t size, enum dma_data_direction dir)
 {
+	unsigned long offset;
+	struct page *page;
 	dma_addr_t addr;
 
+	BUG_ON(!virt_addr_valid(cpu_addr));
+	BUG_ON(!virt_addr_valid(cpu_addr + size - 1));
 	BUG_ON(!valid_dma_direction(dir));
 
-	addr = __dma_map_single(dev, cpu_addr, size, dir);
-	debug_dma_map_page(dev, virt_to_page(cpu_addr),
-			(unsigned long)cpu_addr & ~PAGE_MASK, size,
-			dir, addr, true);
+	page = virt_to_page(cpu_addr);
+	offset = (unsigned long)cpu_addr & ~PAGE_MASK;
+	addr = __dma_map_page(dev, page, offset, size, dir);
+	debug_dma_map_page(dev, page, offset, size, dir, addr, true);
 
 	return addr;
 }
@@ -430,7 +417,7 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir)
 {
 	debug_dma_unmap_page(dev, handle, size, dir, true);
-	__dma_unmap_single(dev, handle, size, dir);
+	__dma_unmap_page(dev, handle, size, dir);
 }
 
 /**

trunk/arch/arm/include/asm/entry-macro-multi.S

@@ -1,3 +1,5 @@
+#include <asm/assembler.h>
+
 /*
  * Interrupt handling.  Preserves r7, r8, r9
  */