---

yaml
---
r: 130255
b: refs/heads/master
c: 80ee6f5
h: refs/heads/master
i:
  130253: d052648
  130251: 2edabe6
  130247: f081cd2
  130239: a447147
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ff2bad5f899421850f7e9bc956450e4c61b0b95d
+refs/heads/master: 80ee6f54f51ffc623843dd8955248d4fab064b99

trunk/Documentation/kbuild/kbuild.txt

@@ -3,7 +3,7 @@ Environment variables
 KCPPFLAGS
 --------------------------------------------------
 Additional options to pass when preprocessing. The preprocessing options
-will be used in all cases where kbuild does preprocessing including
+will be used in all cases where kbuild do preprocessing including
 building C files and assembler files.
 
 KAFLAGS
@@ -16,7 +16,7 @@ Additional options to the C compiler.
 
 KBUILD_VERBOSE
 --------------------------------------------------
-Set the kbuild verbosity. Can be assigned same values as "V=...".
+Set the kbuild verbosity. Can be assinged same values as "V=...".
 See make help for the full list.
 Setting "V=..." takes precedence over KBUILD_VERBOSE.
 
@@ -35,14 +35,14 @@ KBUILD_OUTPUT
 --------------------------------------------------
 Specify the output directory when building the kernel.
 The output directory can also be specificed using "O=...".
-Setting "O=..." takes precedence over KBUILD_OUTPUT.
+Setting "O=..." takes precedence over KBUILD_OUTPUT
 
 ARCH
 --------------------------------------------------
 Set ARCH to the architecture to be built.
 In most cases the name of the architecture is the same as the
 directory name found in the arch/ directory.
-But some architectures such as x86 and sparc have aliases.
+But some architectures suach as x86 and sparc has aliases.
 x86: i386 for 32 bit, x86_64 for 64 bit
 sparc: sparc for 32 bit, sparc64 for 64 bit
 
@@ -63,7 +63,7 @@ CF is often used on the command-line like this:
 INSTALL_PATH
 --------------------------------------------------
 INSTALL_PATH specifies where to place the updated kernel and system map
-images. Default is /boot, but you can set it to other values.
+images. Default is /boot, but you can set it to other values
 
 
 MODLIB
@@ -90,7 +90,7 @@ INSTALL_MOD_STRIP will used as the options to the strip command.
 
 INSTALL_FW_PATH
 --------------------------------------------------
-INSTALL_FW_PATH specifies where to install the firmware blobs.
+INSTALL_FW_PATH specify where to install the firmware blobs.
 The default value is:
 
     $(INSTALL_MOD_PATH)/lib/firmware
@@ -99,7 +99,7 @@ The value can be overridden in which case the default value is ignored.
 
 INSTALL_HDR_PATH
 --------------------------------------------------
-INSTALL_HDR_PATH specifies where to install user space headers when
+INSTALL_HDR_PATH specify where to install user space headers when
 executing "make headers_*".
 The default value is:
 
@@ -112,23 +112,22 @@ The value can be overridden in which case the default value is ignored.
 
 KBUILD_MODPOST_WARN
 --------------------------------------------------
-KBUILD_MODPOST_WARN can be set to avoid errors in case of undefined
-symbols in the final module linking stage. It changes such errors
-into warnings.
+KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined
+symbols in the final module linking stage.
 
-KBUILD_MODPOST_NOFINAL
+KBUILD_MODPOST_FINAL
 --------------------------------------------------
 KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
-This is solely useful to speed up test compiles.
+This is solely usefull to speed up test compiles.
 
 KBUILD_EXTRA_SYMBOLS
 --------------------------------------------------
-For modules that use symbols from other modules.
+For modules use symbols from another modules.
 See more details in modules.txt.
 
 ALLSOURCE_ARCHS
 --------------------------------------------------
-For tags/TAGS/cscope targets, you can specify more than one arch
-to be included in the databases, separated by blank space. E.g.:
+For tags/TAGS/cscope targets, you can specify more than one archs
+to be included in the databases, separated by blankspace. e.g.
 
     $ make ALLSOURCE_ARCHS="x86 mips arm" tags

trunk/Documentation/kernel-parameters.txt

@@ -577,6 +577,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			a memory unit (amount[KMG]). See also
 			Documentation/kdump/kdump.txt for a example.
 
+	cs4232=		[HW,OSS]
+			Format: <io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>
+
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
 
@@ -729,6 +732,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			Default value is 0.
 			Value can be changed at runtime via /selinux/enforce.
 
+	es1371=		[HW,OSS]
+			Format: <spdif>,[<nomix>,[<amplifier>]]
+			See also header of sound/oss/es1371.c.
+
 	ether=		[HW,NET] Ethernet cards parameters
 			This option is obsoleted by the "netdev=" option, which
 			has equivalent usage. See its documentation for details.

trunk/Documentation/networking/netconsole.txt

@@ -51,8 +51,7 @@ Built-in netconsole starts immediately after the TCP stack is
 initialized and attempts to bring up the supplied dev at the supplied
 address.
 
-The remote host can run either 'netcat -u -l -p <port>',
-'nc -l -u <port>' or syslogd.
+The remote host can run either 'netcat -u -l -p <port>' or syslogd.
 
 Dynamic reconfiguration:
 ========================

trunk/Documentation/sound/alsa/HD-Audio-Models.txt

@@ -349,7 +349,6 @@ STAC92HD73*
 STAC92HD83*
 ===========
   ref		Reference board
-  mic-ref	Reference board with power managment for ports
 
 STAC9872
 ========

trunk/MAINTAINERS

@@ -2102,8 +2102,7 @@ M:	khali@linux-fr.org
 P:	Ben Dooks (embedded platforms)
 M:	ben-linux@fluff.org
 L:	linux-i2c@vger.kernel.org
-W:	http://i2c.wiki.kernel.org/
-T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
+T:	quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
 S:	Maintained
 
 I2C-TINY-USB DRIVER

trunk/Makefile

@@ -213,10 +213,6 @@ endif
 # Where to locate arch specific headers
 hdr-arch  := $(SRCARCH)
 
-ifeq ($(ARCH),m68knommu)
-       hdr-arch  := m68k
-endif
-
 KCONFIG_CONFIG	?= .config
 
 # SHELL used by kbuild
@@ -610,20 +606,25 @@ export	INSTALL_PATH ?= /boot
 MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
 export MODLIB
 
-#
-#  INSTALL_MOD_STRIP, if defined, will cause modules to be
-#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
-#  the default option --strip-debug will be used.  Otherwise,
-#  INSTALL_MOD_STRIP will used as the options to the strip command.
+strip-symbols := $(srctree)/scripts/strip-symbols \
+		 $(wildcard $(srctree)/arch/$(ARCH)/scripts/strip-symbols)
 
+#
+# INSTALL_MOD_STRIP, if defined, will cause modules to be stripped while
+# they get installed.  If INSTALL_MOD_STRIP is '1', then the default
+# options (see below) will be used.  Otherwise, INSTALL_MOD_STRIP will
+# be used as the option(s) to the objcopy command.
 ifdef INSTALL_MOD_STRIP
 ifeq ($(INSTALL_MOD_STRIP),1)
-mod_strip_cmd = $(STRIP) --strip-debug
+mod_strip_cmd = $(OBJCOPY) --strip-debug
+ifeq ($(CONFIG_KALLSYMS_ALL),$(CONFIG_KALLSYMS_STRIP_GENERATED))
+mod_strip_cmd += --wildcard $(addprefix --strip-symbols ,$(strip-symbols))
+endif
 else
-mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
+mod_strip_cmd = $(OBJCOPY) $(INSTALL_MOD_STRIP)
 endif # INSTALL_MOD_STRIP=1
 else
-mod_strip_cmd = true
+mod_strip_cmd = false
 endif # INSTALL_MOD_STRIP
 export mod_strip_cmd
 
@@ -753,6 +754,7 @@ last_kallsyms := 2
 endif
 
 kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
+kallsyms.h := $(wildcard include/config/kallsyms/*.h) $(wildcard include/config/kallsyms/*/*.h)
 
 define verify_kallsyms
 	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
@@ -777,24 +779,41 @@ endef
 
 # Generate .S file with all kernel symbols
 quiet_cmd_kallsyms = KSYM    $@
-      cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
-                     $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
+      cmd_kallsyms = { test $* -eq 0 || $(NM) -n $<; } \
+		     | $(KALLSYMS) $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) >$@
 
-.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
+quiet_cmd_kstrip = STRIP   $@
+      cmd_kstrip = $(OBJCOPY) --wildcard $(addprefix --strip$(if $(CONFIG_RELOCATABLE),-unneeded)-symbols ,$(filter %/scripts/strip-symbols,$^)) $< $@
+
+$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): KBUILD_AFLAGS += -Wa,--strip-local-absolute
+$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): %.o: %.S scripts FORCE
 	$(call if_changed_dep,as_o_S)
 
-.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
+ifeq ($(CONFIG_KALLSYMS_STRIP_GENERATED),y)
+strip-ext := .stripped
+endif
+
+.tmp_kallsyms%.S: .tmp_vmlinux%$(strip-ext) $(KALLSYMS) $(kallsyms.h)
 	$(call cmd,kallsyms)
 
+# make -jN seems to have problems with intermediate files, see bug #3330.
+.SECONDARY: $(foreach n,1 2 3,.tmp_vmlinux$(n).stripped)
+.tmp_vmlinux%.stripped: .tmp_vmlinux% $(strip-symbols) $(kallsyms.h)
+	$(call cmd,kstrip)
+
+ifneq ($(CONFIG_DEBUG_INFO),y)
+.tmp_vmlinux%: LDFLAGS_vmlinux += -S
+endif
 # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
-.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
-	$(call if_changed_rule,ksym_ld)
+.tmp_vmlinux%: $(vmlinux-lds) $(vmlinux-all) FORCE
+	$(if $(filter 1,$*),$(call if_changed_rule,ksym_ld),$(call if_changed,vmlinux__))
 
-.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
-	$(call if_changed,vmlinux__)
+.tmp_vmlinux0$(strip-ext):
+	$(Q)echo "placeholder" >$@
 
-.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
-	$(call if_changed,vmlinux__)
+.tmp_vmlinux1: .tmp_kallsyms0.o
+.tmp_vmlinux2: .tmp_kallsyms1.o
+.tmp_vmlinux3: .tmp_kallsyms2.o
 
 # Needs to visit scripts/ before $(KALLSYMS) can be used.
 $(KALLSYMS): scripts ;

trunk/arch/arm/common/clkdev.c

@@ -24,33 +24,20 @@
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 
-/*
- * Find the correct struct clk for the device and connection ID.
- * We do slightly fuzzy matching here:
- *  An entry with a NULL ID is assumed to be a wildcard.
- *  If an entry has a device ID, it must match
- *  If an entry has a connection ID, it must match
- * Then we take the most specific entry - with the following
- * order of precidence: dev+con > dev only > con only.
- */
 static struct clk *clk_find(const char *dev_id, const char *con_id)
 {
 	struct clk_lookup *p;
 	struct clk *clk = NULL;
 	int match, best = 0;
 
 	list_for_each_entry(p, &clocks, node) {
+		if ((p->dev_id && !dev_id) || (p->con_id && !con_id))
+			continue;
 		match = 0;
-		if (p->dev_id) {
-			if (!dev_id || strcmp(p->dev_id, dev_id))
-				continue;
-			match += 2;
-		}
-		if (p->con_id) {
-			if (!con_id || strcmp(p->con_id, con_id))
-				continue;
-			match += 1;
-		}
+		if (p->dev_id)
+			match += 2 * (strcmp(p->dev_id, dev_id) == 0);
+		if (p->con_id)
+			match += 1 * (strcmp(p->con_id, con_id) == 0);
 		if (match == 0)
 			continue;
 

trunk/arch/arm/configs/afeb9260_defconfig

@@ -719,8 +719,8 @@ CONFIG_I2C_GPIO=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
+CONFIG_AT24=y
+# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -744,7 +744,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set

trunk/arch/arm/configs/ams_delta_defconfig

@@ -767,7 +767,7 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set

trunk/arch/arm/configs/at91cap9adk_defconfig

@@ -676,7 +676,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -703,7 +703,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set

trunk/arch/arm/configs/at91rm9200dk_defconfig

@@ -636,7 +636,7 @@ CONFIG_I2C_GPIO=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set

trunk/arch/arm/configs/at91rm9200ek_defconfig

@@ -610,7 +610,7 @@ CONFIG_I2C_GPIO=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set

trunk/arch/arm/configs/at91sam9260ek_defconfig

@@ -582,7 +582,7 @@ CONFIG_I2C_GPIO=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set

trunk/arch/arm/configs/at91sam9261ek_defconfig

@@ -660,7 +660,7 @@ CONFIG_I2C_GPIO=y
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -687,7 +687,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set