---

yaml
---
r: 29591
b: refs/heads/master
c: f2a2279
h: refs/heads/master
i:
  29589: faf53e2
  29587: 622e031
  29583: 952484a
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: b464f5794619bbe98a92e1bc4180986e39615ac4
+refs/heads/master: f2a2279ffc0dfd27f6909184a29910e40ae7eebd

trunk/Documentation/sparc/sbus_drivers.txt

@@ -25,84 +25,42 @@ the bits necessary to run your device.  The most commonly
 used members of this structure, and their typical usage,
 will be detailed below.
 
-	Here is a piece of skeleton code for perofming a device
-probe in an SBUS driverunder Linux:
+	Here is how probing is performed by an SBUS driver
+under Linux:
 
-	static int __devinit mydevice_probe_one(struct sbus_dev *sdev)
+	static void init_one_mydevice(struct sbus_dev *sdev)
 	{
-		struct mysdevice *mp = kzalloc(sizeof(*mp), GFP_KERNEL);
-
-		if (!mp)
-			return -ENODEV;
-
-		...
-		dev_set_drvdata(&sdev->ofdev.dev, mp);
-		return 0;
 		...
 	}
 
-	static int __devinit mydevice_probe(struct of_device *dev,
-				            const struct of_device_id *match)
+	static int mydevice_match(struct sbus_dev *sdev)
 	{
-		struct sbus_dev *sdev = to_sbus_device(&dev->dev);
-
-		return mydevice_probe_one(sdev);
+		if (some_criteria(sdev))
+			return 1;
+		return 0;
 	}
 
-	static int __devexit mydevice_remove(struct of_device *dev)
+	static void mydevice_probe(void)
 	{
-		struct sbus_dev *sdev = to_sbus_device(&dev->dev);
-		struct mydevice *mp = dev_get_drvdata(&dev->dev);
-
-		return mydevice_remove_one(sdev, mp);
-	}
-
-	static struct of_device_id mydevice_match[] = {
-		{
-			.name = "mydevice",
-		},
-		{},
-	};
-
-	MODULE_DEVICE_TABLE(of, mydevice_match);
-
-	static struct of_platform_driver mydevice_driver = {
-		.name		= "mydevice",
-		.match_table	= mydevice_match,
-		.probe		= mydevice_probe,
-		.remove		= __devexit_p(mydevice_remove),
-	};
-
-	static int __init mydevice_init(void)
-	{
-		return of_register_driver(&mydevice_driver, &sbus_bus_type);
-	}
+		struct sbus_bus *sbus;
+		struct sbus_dev *sdev;
 
-	static void __exit mydevice_exit(void)
-	{
-		of_unregister_driver(&mydevice_driver);
+		for_each_sbus(sbus) {
+			for_each_sbusdev(sdev, sbus) {
+				if (mydevice_match(sdev))
+					init_one_mydevice(sdev);
+			}
+		}
 	}
 
-	module_init(mydevice_init);
-	module_exit(mydevice_exit);
-
-	The mydevice_match table is a series of entries which
-describes what SBUS devices your driver is meant for.  In the
-simplest case you specify a string for the 'name' field.  Every
-SBUS device with a 'name' property matching your string will
-be passed one-by-one to your .probe method.
-
-	You should store away your device private state structure
-pointer in the drvdata area so that you can retrieve it later on
-in your .remove method.
+	All this does is walk through all SBUS devices in the
+system, checks each to see if it is of the type which
+your driver is written for, and if so it calls the init
+routine to attach the device and prepare to drive it.
 
-	Any memory allocated, registers mapped, IRQs registered,
-etc. must be undone by your .remove method so that all resources
-of your device are relased by the time it returns.
-
-	You should _NOT_ use the for_each_sbus(), for_each_sbusdev(),
-and for_all_sbusdev() interfaces.  They are deprecated, will be
-removed, and no new driver should reference them ever.
+	"init_one_mydevice" might do things like allocate software
+state structures, map in I/O registers, place the hardware
+into an initialized state, etc.
 
 		Mapping and Accessing I/O Registers
 
@@ -305,3 +263,10 @@ discussed above and plus it handles both PCI and SBUS boards.
 	Lance driver abuses consistent mappings for data transfer.
 It is a nifty trick which we do not particularly recommend...
 Just check it out and know that it's legal.
+
+			Bad examples, do NOT use
+
+	drivers/video/cgsix.c
+	This one uses result of sbus_ioremap as if it is an address.
+This does NOT work on sparc64 and therefore is broken. We will
+convert it at a later date.

trunk/arch/i386/kernel/vmlinux.lds.S

@@ -37,13 +37,6 @@ SECTIONS
 
   RODATA
 
-  . = ALIGN(4);
-  __tracedata_start = .;
-  .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
-	*(.tracedata)
-  }
-  __tracedata_end = .;
-
   /* writeable */
   .data : AT(ADDR(.data) - LOAD_OFFSET) {	/* Data */
 	*(.data)

trunk/arch/sparc/kernel/Makefile

@@ -12,7 +12,7 @@ obj-y    := entry.o wof.o wuf.o etrap.o rtrap.o traps.o $(IRQ_OBJS) \
 	    sys_sparc.o sunos_asm.o systbls.o \
 	    time.o windows.o cpu.o devices.o sclow.o \
 	    tadpole.o tick14.o ptrace.o sys_solaris.o \
-	    unaligned.o muldiv.o semaphore.o prom.o of_device.o
+	    unaligned.o muldiv.o semaphore.o
 
 obj-$(CONFIG_PCI) += pcic.o
 obj-$(CONFIG_SUN4) += sun4setup.o