---

yaml
---
r: 96208
b: refs/heads/master
c: 97ac8ca
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e284e5c6601cbb16e48854be26aa57a8fa844e35
+refs/heads/master: 97ac8caee238d2a81c23661916f7acd3a22c85fe

trunk/drivers/net/e1000e/defines.h

@@ -648,6 +648,8 @@
 #define IFE_E_PHY_ID         0x02A80330
 #define IFE_PLUS_E_PHY_ID    0x02A80320
 #define IFE_C_E_PHY_ID       0x02A80310
+#define BME1000_E_PHY_ID     0x01410CB0
+#define BME1000_E_PHY_ID_R2  0x01410CB1
 
 /* M88E1000 Specific Registers */
 #define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */
@@ -701,6 +703,14 @@
 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK  0x0E00
 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X    0x0800
 
+/* BME1000 PHY Specific Control Register */
+#define BME1000_PSCR_ENABLE_DOWNSHIFT   0x0800 /* 1 = enable downshift */
+
+
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
+                           ((reg) & MAX_PHY_REG_ADDRESS))
+
 /*
  * Bits...
  * 15-5: page

trunk/drivers/net/e1000e/e1000.h

@@ -127,7 +127,7 @@ struct e1000_buffer {
 		/* arrays of page information for packet split */
 		struct e1000_ps_page *ps_pages;
 	};
-
+	struct page *page;
 };
 
 struct e1000_ring {
@@ -304,6 +304,7 @@ struct e1000_info {
 #define FLAG_HAS_CTRLEXT_ON_LOAD          (1 << 5)
 #define FLAG_HAS_SWSM_ON_LOAD             (1 << 6)
 #define FLAG_HAS_JUMBO_FRAMES             (1 << 7)
+#define FLAG_IS_ICH                       (1 << 9)
 #define FLAG_HAS_SMART_POWER_DOWN         (1 << 11)
 #define FLAG_IS_QUAD_PORT_A               (1 << 12)
 #define FLAG_IS_QUAD_PORT                 (1 << 13)
@@ -386,6 +387,7 @@ extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
 						 bool state);
 extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
 extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
+extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
 
 extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
 extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
@@ -443,6 +445,9 @@ extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw);
 extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
 extern s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
 extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id);
+extern s32 e1000e_determine_phy_address(struct e1000_hw *hw);
+extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
 extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
 extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
 extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);

trunk/drivers/net/e1000e/ethtool.c

@@ -803,8 +803,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	/* restore previous status */
 	ew32(STATUS, before);
 
-	if ((mac->type != e1000_ich8lan) &&
-	    (mac->type != e1000_ich9lan)) {
+	if (!(adapter->flags & FLAG_IS_ICH)) {
 		REG_PATTERN_TEST(E1000_FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
 		REG_PATTERN_TEST(E1000_FCAH, 0x0000FFFF, 0xFFFFFFFF);
 		REG_PATTERN_TEST(E1000_FCT, 0x0000FFFF, 0xFFFFFFFF);
@@ -824,15 +823,13 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 
 	REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000);
 
-	before = (((mac->type == e1000_ich8lan) ||
-		   (mac->type == e1000_ich9lan)) ? 0x06C3B33E : 0x06DFB3FE);
+	before = ((adapter->flags & FLAG_IS_ICH) ? 0x06C3B33E : 0x06DFB3FE);
 	REG_SET_AND_CHECK(E1000_RCTL, before, 0x003FFFFB);
 	REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000);
 
 	REG_SET_AND_CHECK(E1000_RCTL, before, 0xFFFFFFFF);
 	REG_PATTERN_TEST(E1000_RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
-	if ((mac->type != e1000_ich8lan) &&
-	    (mac->type != e1000_ich9lan))
+	if (!(adapter->flags & FLAG_IS_ICH))
 		REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF);
 	REG_PATTERN_TEST(E1000_TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
 	REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
@@ -911,9 +908,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
 
 	/* Test each interrupt */
 	for (i = 0; i < 10; i++) {
-
-		if (((adapter->hw.mac.type == e1000_ich8lan) ||
-		     (adapter->hw.mac.type == e1000_ich9lan)) && i == 8)
+		if ((adapter->flags & FLAG_IS_ICH) && (i == 8))
 			continue;
 
 		/* Interrupt to test */
@@ -1184,6 +1179,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 ctrl_reg = 0;
 	u32 stat_reg = 0;
+	u16 phy_reg = 0;
 
 	hw->mac.autoneg = 0;
 
@@ -1211,6 +1207,28 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 			     E1000_CTRL_SPD_100 |/* Force Speed to 100 */
 			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
 		break;
+	case e1000_phy_bm:
+		/* Set Default MAC Interface speed to 1GB */
+		e1e_rphy(hw, PHY_REG(2, 21), &phy_reg);
+		phy_reg &= ~0x0007;
+		phy_reg |= 0x006;
+		e1e_wphy(hw, PHY_REG(2, 21), phy_reg);
+		/* Assert SW reset for above settings to take effect */
+		e1000e_commit_phy(hw);
+		mdelay(1);
+		/* Force Full Duplex */
+		e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
+		e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C);
+		/* Set Link Up (in force link) */
+		e1e_rphy(hw, PHY_REG(776, 16), &phy_reg);
+		e1e_wphy(hw, PHY_REG(776, 16), phy_reg | 0x0040);
+		/* Force Link */
+		e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
+		e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x0040);
+		/* Set Early Link Enable */
+		e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
+		e1e_wphy(hw, PHY_REG(769, 20), phy_reg | 0x0400);
+		/* fall through */
 	default:
 		/* force 1000, set loopback */
 		e1e_wphy(hw, PHY_CONTROL, 0x4140);
@@ -1224,8 +1242,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 			     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
 			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
 
-		if ((adapter->hw.mac.type == e1000_ich8lan) ||
-		    (adapter->hw.mac.type == e1000_ich9lan))
+		if (adapter->flags & FLAG_IS_ICH)
 			ctrl_reg |= E1000_CTRL_SLU;	/* Set Link Up */
 	}
 

trunk/drivers/net/e1000e/hw.h

@@ -216,6 +216,21 @@ enum e1e_registers {
 #define IGP01E1000_PHY_LINK_HEALTH	0x13 /* PHY Link Health */
 #define IGP02E1000_PHY_POWER_MGMT	0x19 /* Power Management */
 #define IGP01E1000_PHY_PAGE_SELECT	0x1F /* Page Select */
+#define BM_PHY_PAGE_SELECT		22   /* Page Select for BM */
+#define IGP_PAGE_SHIFT			5
+#define PHY_REG_MASK			0x1F
+
+#define BM_WUC_PAGE			800
+#define BM_WUC_ADDRESS_OPCODE		0x11
+#define BM_WUC_DATA_OPCODE		0x12
+#define BM_WUC_ENABLE_PAGE		769
+#define BM_WUC_ENABLE_REG		17
+#define BM_WUC_ENABLE_BIT		(1 << 2)
+#define BM_WUC_HOST_WU_BIT		(1 << 4)
+
+#define BM_WUC	PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS	PHY_REG(BM_WUC_PAGE, 3)
 
 #define IGP01E1000_PHY_PCS_INIT_REG	0x00B4
 #define IGP01E1000_PHY_POLARITY_MASK	0x0078
@@ -331,10 +346,16 @@ enum e1e_registers {
 #define E1000_DEV_ID_ICH8_IFE_G			0x10C5
 #define E1000_DEV_ID_ICH8_IGP_M			0x104D
 #define E1000_DEV_ID_ICH9_IGP_AMT		0x10BD
+#define E1000_DEV_ID_ICH9_IGP_M_AMT		0x10F5
+#define E1000_DEV_ID_ICH9_IGP_M			0x10BF
+#define E1000_DEV_ID_ICH9_IGP_M_V		0x10CB
 #define E1000_DEV_ID_ICH9_IGP_C			0x294C
 #define E1000_DEV_ID_ICH9_IFE			0x10C0
 #define E1000_DEV_ID_ICH9_IFE_GT		0x10C3
 #define E1000_DEV_ID_ICH9_IFE_G			0x10C2
+#define E1000_DEV_ID_ICH10_R_BM_LM		0x10CC
+#define E1000_DEV_ID_ICH10_R_BM_LF		0x10CD
+#define E1000_DEV_ID_ICH10_R_BM_V		0x10CE
 
 #define E1000_FUNC_1 1
 
@@ -378,6 +399,7 @@ enum e1000_phy_type {
 	e1000_phy_gg82563,
 	e1000_phy_igp_3,
 	e1000_phy_ife,
+	e1000_phy_bm,
 };
 
 enum e1000_bus_width {

trunk/drivers/net/e1000e/ich8lan.c

@@ -38,6 +38,12 @@
  * 82566DM Gigabit Network Connection
  * 82566MC Gigabit Network Connection
  * 82566MM Gigabit Network Connection
+ * 82567LM Gigabit Network Connection
+ * 82567LF Gigabit Network Connection
+ * 82567LM-2 Gigabit Network Connection
+ * 82567LF-2 Gigabit Network Connection
+ * 82567V-2 Gigabit Network Connection
+ * 82562GT-3 10/100 Network Connection
  */
 
 #include <linux/netdevice.h>
@@ -198,6 +204,19 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 	phy->addr			= 1;
 	phy->reset_delay_us		= 100;
 
+	/*
+	 * We may need to do this twice - once for IGP and if that fails,
+	 * we'll set BM func pointers and try again
+	 */
+	ret_val = e1000e_determine_phy_address(hw);
+	if (ret_val) {
+		hw->phy.ops.write_phy_reg = e1000e_write_phy_reg_bm;
+		hw->phy.ops.read_phy_reg  = e1000e_read_phy_reg_bm;
+		ret_val = e1000e_determine_phy_address(hw);
+		if (ret_val)
+			return ret_val;
+	}
+
 	phy->id = 0;
 	while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) &&
 	       (i++ < 100)) {
@@ -219,6 +238,13 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 		phy->type = e1000_phy_ife;
 		phy->autoneg_mask = E1000_ALL_NOT_GIG;
 		break;
+	case BME1000_E_PHY_ID:
+		phy->type = e1000_phy_bm;
+		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+		hw->phy.ops.read_phy_reg = e1000e_read_phy_reg_bm;
+		hw->phy.ops.write_phy_reg = e1000e_write_phy_reg_bm;
+		hw->phy.ops.commit_phy = e1000e_phy_sw_reset;
+		break;
 	default:
 		return -E1000_ERR_PHY;
 		break;
@@ -664,6 +690,7 @@ static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw)
 		return e1000_get_phy_info_ife_ich8lan(hw);
 		break;
 	case e1000_phy_igp_3:
+	case e1000_phy_bm:
 		return e1000e_get_phy_info_igp(hw);
 		break;
 	default:
@@ -728,7 +755,7 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 	s32 ret_val = 0;
 	u16 data;
 
-	if (phy->type != e1000_phy_igp_3)
+	if (phy->type == e1000_phy_ife)
 		return ret_val;
 
 	phy_ctrl = er32(PHY_CTRL);
@@ -1918,8 +1945,35 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
 		ret_val = e1000e_copper_link_setup_igp(hw);
 		if (ret_val)
 			return ret_val;
+	} else if (hw->phy.type == e1000_phy_bm) {
+		ret_val = e1000e_copper_link_setup_m88(hw);
+		if (ret_val)
+			return ret_val;
 	}
 
+	if (hw->phy.type == e1000_phy_ife) {
+		ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &reg_data);
+		if (ret_val)
+			return ret_val;
+
+		reg_data &= ~IFE_PMC_AUTO_MDIX;
+
+		switch (hw->phy.mdix) {
+		case 1:
+			reg_data &= ~IFE_PMC_FORCE_MDIX;
+			break;
+		case 2:
+			reg_data |= IFE_PMC_FORCE_MDIX;
+			break;
+		case 0:
+		default:
+			reg_data |= IFE_PMC_AUTO_MDIX;
+			break;
+		}
+		ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data);
+		if (ret_val)
+			return ret_val;
+	}
 	return e1000e_setup_copper_link(hw);
 }
 
@@ -2126,6 +2180,31 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
 				       reg_data);
 }
 
+/**
+ *  e1000e_disable_gig_wol_ich8lan - disable gig during WoL
+ *  @hw: pointer to the HW structure
+ *
+ *  During S0 to Sx transition, it is possible the link remains at gig
+ *  instead of negotiating to a lower speed.  Before going to Sx, set
+ *  'LPLU Enabled' and 'Gig Disable' to force link speed negotiation
+ *  to a lower speed.
+ *
+ *  Should only be called for ICH9 devices.
+ **/
+void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
+{
+	u32 phy_ctrl;
+
+	if (hw->mac.type == e1000_ich9lan) {
+		phy_ctrl = er32(PHY_CTRL);
+		phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU |
+		            E1000_PHY_CTRL_GBE_DISABLE;
+		ew32(PHY_CTRL, phy_ctrl);
+	}
+
+	return;
+}
+
 /**
  *  e1000_cleanup_led_ich8lan - Restore the default LED operation
  *  @hw: pointer to the HW structure
@@ -2247,6 +2326,7 @@ static struct e1000_nvm_operations ich8_nvm_ops = {
 struct e1000_info e1000_ich8_info = {
 	.mac			= e1000_ich8lan,
 	.flags			= FLAG_HAS_WOL
+				  | FLAG_IS_ICH
 				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
 				  | FLAG_HAS_AMT
@@ -2262,6 +2342,7 @@ struct e1000_info e1000_ich8_info = {
 struct e1000_info e1000_ich9_info = {
 	.mac			= e1000_ich9lan,
 	.flags			= FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_IS_ICH
 				  | FLAG_HAS_WOL
 				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD