---

yaml
---
r: 84136
b: refs/heads/master
c: 70ec75c
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 23b168d425ca0ca25257ff8205a39f1c2d1b0f27
+refs/heads/master: 70ec75c5b8e0bda7a16fb387f91e08545f379a0e

trunk/Documentation/00-INDEX

@@ -14,6 +14,7 @@ Following translations are available on the WWW:
 	- this file.
 ABI/
 	- info on kernel <-> userspace ABI and relative interface stability.
+
 BUG-HUNTING
 	- brute force method of doing binary search of patches to find bug.
 Changes
@@ -66,6 +67,8 @@ VGA-softcursor.txt
 	- how to change your VGA cursor from a blinking underscore.
 accounting/
 	- documentation on accounting and taskstats.
+acpi/
+	- info on ACPI-specific hooks in the kernel.
 aoe/
 	- description of AoE (ATA over Ethernet) along with config examples.
 applying-patches.txt

trunk/Documentation/acpi/method-tracing.txt

@@ -0,0 +1,26 @@
+/sys/module/acpi/parameters/:
+
+trace_method_name
+	The AML method name that the user wants to trace
+
+trace_debug_layer
+	The temporary debug_layer used when tracing the method.
+	Using 0xffffffff by default if it is 0.
+
+trace_debug_level
+	The temporary debug_level used when tracing the method.
+	Using 0x00ffffff by default if it is 0.
+
+trace_state
+	The status of the tracing feature.
+
+	"enabled" means this feature is enabled
+	and the AML method is traced every time it's executed.
+
+	"1" means this feature is enabled and the AML method
+	will only be traced during the next execution.
+
+	"disabled" means this feature is disabled.
+	Users can enable/disable this debug tracing feature by
+	"echo string > /sys/module/acpi/parameters/trace_state".
+	"string" should be one of "enable", "disable" and "1".

trunk/Documentation/thinkpad-acpi.txt

@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.17
-                         October 04th, 2007
+                            Version 0.19
+                         January 06th, 2008
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -215,6 +215,11 @@ The following commands can be written to the /proc/acpi/ibm/hotkey file:
 	... any other 8-hex-digit mask ...
 	echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
 
+The procfs interface does not support NVRAM polling control.  So as to
+maintain maximum bug-to-bug compatibility, it does not report any masks,
+nor does it allow one to manipulate the hot key mask when the firmware
+does not support masks at all, even if NVRAM polling is in use.
+
 sysfs notes:
 
 	hotkey_bios_enabled:
@@ -231,17 +236,26 @@ sysfs notes:
 		to this value.
 
 	hotkey_enable:
-		Enables/disables the hot keys feature, and reports
-		current status of the hot keys feature.
+		Enables/disables the hot keys feature in the ACPI
+		firmware, and reports current status of the hot keys
+		feature.  Has no effect on the NVRAM hot key polling
+		functionality.
 
 		0: disables the hot keys feature / feature disabled
 		1: enables the hot keys feature / feature enabled
 
 	hotkey_mask:
-		bit mask to enable driver-handling and ACPI event
-		generation for each hot key (see above).  Returns the
-		current status of the hot keys mask, and allows one to
-		modify it.
+		bit mask to enable driver-handling (and depending on
+		the firmware, ACPI event generation) for each hot key
+		(see above).  Returns the current status of the hot keys
+		mask, and allows one to modify it.
+
+		Note: when NVRAM polling is active, the firmware mask
+		will be different from the value returned by
+		hotkey_mask.  The driver will retain enabled bits for
+		hotkeys that are under NVRAM polling even if the
+		firmware refuses them, and will not set these bits on
+		the firmware hot key mask.
 
 	hotkey_all_mask:
 		bit mask that should enable event reporting for all
@@ -257,12 +271,48 @@ sysfs notes:
 		handled by the firmware anyway.  Echo it to
 		hotkey_mask above, to use.
 
+	hotkey_source_mask:
+		bit mask that selects which hot keys will the driver
+		poll the NVRAM for.  This is auto-detected by the driver
+		based on the capabilities reported by the ACPI firmware,
+		but it can be overridden at runtime.
+
+		Hot keys whose bits are set in both hotkey_source_mask
+		and also on hotkey_mask are polled for in NVRAM.  Only a
+		few hot keys are available through CMOS NVRAM polling.
+
+		Warning: when in NVRAM mode, the volume up/down/mute
+		keys are synthesized according to changes in the mixer,
+		so you have to use volume up or volume down to unmute,
+		as per the ThinkPad volume mixer user interface.  When
+		in ACPI event mode, volume up/down/mute are reported as
+		separate events, but this behaviour may be corrected in
+		future releases of this driver, in which case the
+		ThinkPad volume mixer user interface semanthics will be
+		enforced.
+
+	hotkey_poll_freq:
+		frequency in Hz for hot key polling. It must be between
+		0 and 25 Hz.  Polling is only carried out when strictly
+		needed.
+
+		Setting hotkey_poll_freq to zero disables polling, and
+		will cause hot key presses that require NVRAM polling
+		to never be reported.
+
+		Setting hotkey_poll_freq too low will cause repeated
+		pressings of the same hot key to be misreported as a
+		single key press, or to not even be detected at all.
+		The recommended polling frequency is 10Hz.
+
 	hotkey_radio_sw:
 		if the ThinkPad has a hardware radio switch, this
 		attribute will read 0 if the switch is in the "radios
 		disabled" postition, and 1 if the switch is in the
 		"radios enabled" position.
 
+		This attribute has poll()/select() support.
+
 	hotkey_report_mode:
 		Returns the state of the procfs ACPI event report mode
 		filter for hot keys.  If it is set to 1 (the default),
@@ -277,6 +327,25 @@ sysfs notes:
 		May return -EPERM (write access locked out by module
 		parameter) or -EACCES (read-only).
 
+	wakeup_reason:
+		Set to 1 if the system is waking up because the user
+		requested a bay ejection.  Set to 2 if the system is
+		waking up because the user requested the system to
+		undock.  Set to zero for normal wake-ups or wake-ups
+		due to unknown reasons.
+
+		This attribute has poll()/select() support.
+
+	wakeup_hotunplug_complete:
+		Set to 1 if the system was waken up because of an
+		undock or bay ejection request, and that request
+		was sucessfully completed.  At this point, it might
+		be useful to send the system back to sleep, at the
+		user's choice.  Refer to HKEY events 0x4003 and
+		0x3003, below.
+
+		This attribute has poll()/select() support.
+
 input layer notes:
 
 A Hot key is mapped to a single input layer EV_KEY event, possibly
@@ -427,6 +496,23 @@ Non hot-key ACPI HKEY event map:
 The above events are not propagated by the driver, except for legacy
 compatibility purposes when hotkey_report_mode is set to 1.
 
+0x2304		System is waking up from suspend to undock
+0x2305		System is waking up from suspend to eject bay
+0x2404		System is waking up from hibernation to undock
+0x2405		System is waking up from hibernation to eject bay
+
+The above events are never propagated by the driver.
+
+0x3003		Bay ejection (see 0x2x05) complete, can sleep again
+0x4003		Undocked (see 0x2x04), can sleep again
+0x5009		Tablet swivel: switched to tablet mode
+0x500A		Tablet swivel: switched to normal mode
+0x500B		Tablet pen insterted into its storage bay
+0x500C		Tablet pen removed from its storage bay
+0x5010		Brightness level changed (newer Lenovo BIOSes)
+
+The above events are propagated by the driver.
+
 Compatibility notes:
 
 ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never
@@ -1263,3 +1349,17 @@ Sysfs interface changelog:
 		and the hwmon class for libsensors4 (lm-sensors 3)
 		compatibility.  Moved all hwmon attributes to this
 		new platform device.
+
+0x020100:	Marker for thinkpad-acpi with hot key NVRAM polling
+		support.  If you must, use it to know you should not
+		start an userspace NVRAM poller (allows to detect when
+		NVRAM is compiled out by the user because it is
+		unneeded/undesired in the first place).
+0x020101:	Marker for thinkpad-acpi with hot key NVRAM polling
+		and proper hotkey_mask semanthics (version 8 of the
+		NVRAM polling patch).  Some development snapshots of
+		0.18 had an earlier version that did strange things
+		to hotkey_mask.
+
+0x020200:	Add poll()/select() support to the following attributes:
+		hotkey_radio_sw, wakeup_hotunplug_complete, wakeup_reason

trunk/arch/ia64/kernel/acpi.c

@@ -69,6 +69,20 @@ unsigned int acpi_cpei_phys_cpuid;
 
 unsigned long acpi_wakeup_address = 0;
 
+#ifdef CONFIG_IA64_GENERIC
+static unsigned long __init acpi_find_rsdp(void)
+{
+	unsigned long rsdp_phys = 0;
+
+	if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
+		rsdp_phys = efi.acpi20;
+	else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
+		printk(KERN_WARNING PREFIX
+		       "v1.0/r0.71 tables no longer supported\n");
+	return rsdp_phys;
+}
+#endif
+
 const char __init *
 acpi_get_sysname(void)
 {
@@ -152,7 +166,7 @@ int acpi_request_vector(u32 int_type)
 	return vector;
 }
 
-char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
+char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
 {
 	return __va(phys_addr);
 }
@@ -631,18 +645,6 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
 	return 0;
 }
 
-unsigned long __init acpi_find_rsdp(void)
-{
-	unsigned long rsdp_phys = 0;
-
-	if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
-		rsdp_phys = efi.acpi20;
-	else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
-		printk(KERN_WARNING PREFIX
-		       "v1.0/r0.71 tables no longer supported\n");
-	return rsdp_phys;
-}
-
 int __init acpi_boot_init(void)
 {
 

trunk/arch/x86/Kconfig

@@ -98,13 +98,19 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	def_bool n
 
+config ARCH_HAS_CPU_IDLE_WAIT
+	def_bool y
+
 config GENERIC_CALIBRATE_DELAY
 	def_bool y
 
 config GENERIC_TIME_VSYSCALL
 	bool
 	default X86_64
 
+config ARCH_HAS_CPU_RELAX
+	def_bool y
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool X86_64
 

trunk/arch/x86/kernel/acpi/boot.c

@@ -106,7 +106,7 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
 #ifdef	CONFIG_X86_64
 
 /* rely on all ACPI tables being in the direct mapping */
-char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
+char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
 {
 	if (!phys_addr || !size)
 		return NULL;
@@ -131,7 +131,7 @@ char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
  * from the fixed base.  That's why we start at FIX_IO_APIC_BASE_END and
  * count idx down while incrementing the phys address.
  */
-char *__acpi_map_table(unsigned long phys, unsigned long size)
+char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 {
 	unsigned long base, offset, mapped_size;
 	int idx;
@@ -587,25 +587,6 @@ int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
 
 EXPORT_SYMBOL(acpi_unregister_ioapic);
 
-static unsigned long __init
-acpi_scan_rsdp(unsigned long start, unsigned long length)
-{
-	unsigned long offset = 0;
-	unsigned long sig_len = sizeof("RSD PTR ") - 1;
-
-	/*
-	 * Scan all 16-byte boundaries of the physical memory region for the
-	 * RSDP signature.
-	 */
-	for (offset = 0; offset < length; offset += 16) {
-		if (strncmp((char *)(phys_to_virt(start) + offset), "RSD PTR ", sig_len))
-			continue;
-		return (start + offset);
-	}
-
-	return 0;
-}
-
 static int __init acpi_parse_sbf(struct acpi_table_header *table)
 {
 	struct acpi_table_boot *sb;
@@ -748,27 +729,6 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
 	return 0;
 }
 
-unsigned long __init acpi_find_rsdp(void)
-{
-	unsigned long rsdp_phys = 0;
-
-	if (efi_enabled) {
-		if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
-			return efi.acpi20;
-		else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
-			return efi.acpi;
-	}
-	/*
-	 * Scan memory looking for the RSDP signature. First search EBDA (low
-	 * memory) paragraphs and then search upper memory (E0000-FFFFF).
-	 */
-	rsdp_phys = acpi_scan_rsdp(0, 0x400);
-	if (!rsdp_phys)
-		rsdp_phys = acpi_scan_rsdp(0xE0000, 0x20000);
-
-	return rsdp_phys;
-}
-
 #ifdef	CONFIG_X86_LOCAL_APIC
 /*
  * Parse LAPIC entries in MADT

trunk/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c

@@ -189,10 +189,7 @@ static unsigned int pentium4_get_frequency(void)
 		printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to <linux@brodo.de>\n");
 
 	/* Multiplier. */
-	if (c->x86_model < 2)
-		mult = msr_lo >> 27;
-	else
-		mult = msr_lo >> 24;
+	mult = msr_lo >> 24;
 
 	dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult));
 

trunk/arch/x86/kernel/srat_32.c

@@ -274,7 +274,7 @@ int __init get_memcfg_from_srat(void)
 	int tables = 0;
 	int i = 0;
 
-	rsdp_address = acpi_find_rsdp();
+	rsdp_address = acpi_os_get_root_pointer();
 	if (!rsdp_address) {
 		printk("%s: System description tables not found\n",
 		       __FUNCTION__);