---

yaml
---
r: 131663
b: refs/heads/master
c: 4898c2b
h: refs/heads/master
i:
  131661: 3c781ce
  131659: d12966b
  131655: 8ece3dc
  131647: ebcbb9e
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 56f382a08722186623400180adbb9d1be1721cee
+refs/heads/master: 4898c2b2f04051e19f4230683c0f0b15f71af887

trunk/CREDITS

@@ -2166,7 +2166,6 @@ D: Initial implementation of VC's, pty's and select()
 
 N: Pavel Machek
 E: pavel@ucw.cz
-E: pavel@suse.cz
 D: Softcursor for vga, hypertech cdrom support, vcsa bugfix, nbd
 D: sun4/330 port, capabilities for elf, speedup for rm on ext2, USB,
 D: work on suspend-to-ram/disk, killing duplicates from ioctl32

trunk/Documentation/ABI/testing/sysfs-firmware-memmap

@@ -1,6 +1,6 @@
 What:		/sys/firmware/memmap/
 Date:		June 2008
-Contact:	Bernhard Walle <bwalle@suse.de>
+Contact:	Bernhard Walle <bernhard.walle@gmx.de>
 Description:
 		On all platforms, the firmware provides a memory map which the
 		kernel reads. The resources from that memory map are registered

trunk/Documentation/PCI/PCIEBUS-HOWTO.txt

@@ -93,7 +93,7 @@ the PCI Express Port Bus driver from loading a service driver.
 
 int pcie_port_service_register(struct pcie_port_service_driver *new)
 
-This API replaces the Linux Driver Model's pci_module_init API. A
+This API replaces the Linux Driver Model's pci_register_driver API. A
 service driver should always calls pcie_port_service_register at
 module init. Note that after service driver being loaded, calls
 such as pci_enable_device(dev) and pci_set_master(dev) are no longer

trunk/Documentation/cgroups/cgroups.txt

@@ -252,10 +252,8 @@ cgroup file system directories.
 When a task is moved from one cgroup to another, it gets a new
 css_set pointer - if there's an already existing css_set with the
 desired collection of cgroups then that group is reused, else a new
-css_set is allocated. Note that the current implementation uses a
-linear search to locate an appropriate existing css_set, so isn't
-very efficient. A future version will use a hash table for better
-performance.
+css_set is allocated. The appropriate existing css_set is located by
+looking into a hash table.
 
 To allow access from a cgroup to the css_sets (and hence tasks)
 that comprise it, a set of cg_cgroup_link objects form a lattice;

trunk/Documentation/cgroups/cpusets.txt

@@ -142,7 +142,7 @@ into the rest of the kernel, none in performance critical paths:
  - in fork and exit, to attach and detach a task from its cpuset.
  - in sched_setaffinity, to mask the requested CPUs by what's
    allowed in that tasks cpuset.
- - in sched.c migrate_all_tasks(), to keep migrating tasks within
+ - in sched.c migrate_live_tasks(), to keep migrating tasks within
    the CPUs allowed by their cpuset, if possible.
  - in the mbind and set_mempolicy system calls, to mask the requested
    Memory Nodes by what's allowed in that tasks cpuset.
@@ -175,6 +175,10 @@ files describing that cpuset:
  - mem_exclusive flag: is memory placement exclusive?
  - mem_hardwall flag:  is memory allocation hardwalled
  - memory_pressure: measure of how much paging pressure in cpuset
+ - memory_spread_page flag: if set, spread page cache evenly on allowed nodes
+ - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+ - sched_load_balance flag: if set, load balance within CPUs on that cpuset
+ - sched_relax_domain_level: the searching range when migrating tasks
 
 In addition, the root cpuset only has the following file:
  - memory_pressure_enabled flag: compute memory_pressure?
@@ -252,7 +256,7 @@ is causing.
 
 This is useful both on tightly managed systems running a wide mix of
 submitted jobs, which may choose to terminate or re-prioritize jobs that
-are trying to use more memory than allowed on the nodes assigned them,
+are trying to use more memory than allowed on the nodes assigned to them,
 and with tightly coupled, long running, massively parallel scientific
 computing jobs that will dramatically fail to meet required performance
 goals if they start to use more memory than allowed to them.
@@ -378,7 +382,7 @@ as cpusets and sched_setaffinity.
 The algorithmic cost of load balancing and its impact on key shared
 kernel data structures such as the task list increases more than
 linearly with the number of CPUs being balanced.  So the scheduler
-has support to  partition the systems CPUs into a number of sched
+has support to partition the systems CPUs into a number of sched
 domains such that it only load balances within each sched domain.
 Each sched domain covers some subset of the CPUs in the system;
 no two sched domains overlap; some CPUs might not be in any sched
@@ -485,17 +489,22 @@ of CPUs allowed to a cpuset having 'sched_load_balance' enabled.
 The internal kernel cpuset to scheduler interface passes from the
 cpuset code to the scheduler code a partition of the load balanced
 CPUs in the system. This partition is a set of subsets (represented
-as an array of cpumask_t) of CPUs, pairwise disjoint, that cover all
-the CPUs that must be load balanced.
-
-Whenever the 'sched_load_balance' flag changes, or CPUs come or go
-from a cpuset with this flag enabled, or a cpuset with this flag
-enabled is removed, the cpuset code builds a new such partition and
-passes it to the scheduler sched domain setup code, to have the sched
-domains rebuilt as necessary.
+as an array of struct cpumask) of CPUs, pairwise disjoint, that cover
+all the CPUs that must be load balanced.
+
+The cpuset code builds a new such partition and passes it to the
+scheduler sched domain setup code, to have the sched domains rebuilt
+as necessary, whenever:
+ - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes,
+ - or CPUs come or go from a cpuset with this flag enabled,
+ - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs
+   and with this flag enabled changes,
+ - or a cpuset with non-empty CPUs and with this flag enabled is removed,
+ - or a cpu is offlined/onlined.
 
 This partition exactly defines what sched domains the scheduler should
-setup - one sched domain for each element (cpumask_t) in the partition.
+setup - one sched domain for each element (struct cpumask) in the
+partition.
 
 The scheduler remembers the currently active sched domain partitions.
 When the scheduler routine partition_sched_domains() is invoked from
@@ -559,7 +568,7 @@ domain, the largest value among those is used.  Be careful, if one
 requests 0 and others are -1 then 0 is used.
 
 Note that modifying this file will have both good and bad effects,
-and whether it is acceptable or not will be depend on your situation.
+and whether it is acceptable or not depends on your situation.
 Don't modify this file if you are not sure.
 
 If your situation is:
@@ -600,19 +609,15 @@ to allocate a page of memory for that task.
 
 If a cpuset has its 'cpus' modified, then each task in that cpuset
 will have its allowed CPU placement changed immediately.  Similarly,
-if a tasks pid is written to a cpusets 'tasks' file, in either its
-current cpuset or another cpuset, then its allowed CPU placement is
-changed immediately.  If such a task had been bound to some subset
-of its cpuset using the sched_setaffinity() call, the task will be
-allowed to run on any CPU allowed in its new cpuset, negating the
-affect of the prior sched_setaffinity() call.
+if a tasks pid is written to another cpusets 'tasks' file, then its
+allowed CPU placement is changed immediately.  If such a task had been
+bound to some subset of its cpuset using the sched_setaffinity() call,
+the task will be allowed to run on any CPU allowed in its new cpuset,
+negating the effect of the prior sched_setaffinity() call.
 
 In summary, the memory placement of a task whose cpuset is changed is
 updated by the kernel, on the next allocation of a page for that task,
-but the processor placement is not updated, until that tasks pid is
-rewritten to the 'tasks' file of its cpuset.  This is done to avoid
-impacting the scheduler code in the kernel with a check for changes
-in a tasks processor placement.
+and the processor placement is updated immediately.
 
 Normally, once a page is allocated (given a physical page
 of main memory) then that page stays on whatever node it
@@ -681,10 +686,14 @@ and then start a subshell 'sh' in that cpuset:
   # The next line should display '/Charlie'
   cat /proc/self/cpuset
 
-In the future, a C library interface to cpusets will likely be
-available.  For now, the only way to query or modify cpusets is
-via the cpuset file system, using the various cd, mkdir, echo, cat,
-rmdir commands from the shell, or their equivalent from C.
+There are ways to query or modify cpusets:
+ - via the cpuset file system directly, using the various cd, mkdir, echo,
+   cat, rmdir commands from the shell, or their equivalent from C.
+ - via the C library libcpuset.
+ - via the C library libcgroup.
+   (http://sourceforge.net/proects/libcg/)
+ - via the python application cset.
+   (http://developer.novell.com/wiki/index.php/Cpuset)
 
 The sched_setaffinity calls can also be done at the shell prompt using
 SGI's runon or Robert Love's taskset.  The mbind and set_mempolicy
@@ -756,7 +765,7 @@ mount -t cpuset X /dev/cpuset
 
 is equivalent to
 
-mount -t cgroup -ocpuset X /dev/cpuset
+mount -t cgroup -ocpuset,noprefix X /dev/cpuset
 echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
 
 2.2 Adding/removing cpus

trunk/Documentation/connector/cn_test.c

@@ -137,7 +137,7 @@ static void cn_test_timer_func(unsigned long __data)
 
 		memcpy(m + 1, data, m->len);
 
-		cn_netlink_send(m, 0, gfp_any());
+		cn_netlink_send(m, 0, GFP_ATOMIC);
 		kfree(m);
 	}
 
@@ -160,10 +160,8 @@ static int cn_test_init(void)
 		goto err_out;
 	}
 
-	init_timer(&cn_test_timer);
-	cn_test_timer.function = cn_test_timer_func;
+	setup_timer(&cn_test_timer, cn_test_timer_func, 0);
 	cn_test_timer.expires = jiffies + HZ;
-	cn_test_timer.data = 0;
 	add_timer(&cn_test_timer);
 
 	return 0;

trunk/Documentation/hwmon/hpfall.c

@@ -0,0 +1,101 @@
+/* Disk protection for HP machines.
+ *
+ * Copyright 2008 Eric Piel
+ * Copyright 2009 Pavel Machek <pavel@suse.cz>
+ *
+ * GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <signal.h>
+
+void write_int(char *path, int i)
+{
+	char buf[1024];
+	int fd = open(path, O_RDWR);
+	if (fd < 0) {
+		perror("open");
+		exit(1);
+	}
+	sprintf(buf, "%d", i);
+	if (write(fd, buf, strlen(buf)) != strlen(buf)) {
+		perror("write");
+		exit(1);
+	}
+	close(fd);
+}
+
+void set_led(int on)
+{
+	write_int("/sys/class/leds/hp::hddprotect/brightness", on);
+}
+
+void protect(int seconds)
+{
+	write_int("/sys/block/sda/device/unload_heads", seconds*1000);
+}
+
+int on_ac(void)
+{
+//	/sys/class/power_supply/AC0/online
+}
+
+int lid_open(void)
+{
+//	/proc/acpi/button/lid/LID/state
+}
+
+void ignore_me(void)
+{
+	protect(0);
+	set_led(0);
+
+}
+
+int main(int argc, char* argv[])
+{
+       int fd, ret;
+
+       fd = open("/dev/freefall", O_RDONLY);
+       if (fd < 0) {
+               perror("open");
+               return EXIT_FAILURE;
+       }
+
+	signal(SIGALRM, ignore_me);
+
+       for (;;) {
+	       unsigned char count;
+
+               ret = read(fd, &count, sizeof(count));
+	       alarm(0);
+	       if ((ret == -1) && (errno == EINTR)) {
+		       /* Alarm expired, time to unpark the heads */
+		       continue;
+	       }
+
+               if (ret != sizeof(count)) {
+                       perror("read");
+                       break;
+               }
+
+	       protect(21);
+	       set_led(1);
+	       if (1 || on_ac() || lid_open()) {
+		       alarm(2);
+	       } else {
+		       alarm(20);
+	       }
+       }
+
+       close(fd);
+       return EXIT_SUCCESS;
+}

trunk/Documentation/hwmon/lis3lv02d

@@ -33,6 +33,14 @@ rate - reports the sampling rate of the accelerometer device in HZ
 This driver also provides an absolute input class device, allowing
 the laptop to act as a pinball machine-esque joystick.
 
+Another feature of the driver is misc device called "freefall" that
+acts similar to /dev/rtc and reacts on free-fall interrupts received
+from the device. It supports blocking operations, poll/select and
+fasync operation modes. You must read 1 bytes from the device.  The
+result is number of free-fall interrupts since the last successful
+read (or 255 if number of interrupts would not fit).
+
+
 Axes orientation
 ----------------
 

trunk/Documentation/kernel-doc-nano-HOWTO.txt

@@ -43,7 +43,8 @@ Only comments so marked will be considered by the kernel-doc scripts,
 and any comment so marked must be in kernel-doc format.  Do not use
 "/**" to be begin a comment block unless the comment block contains
 kernel-doc formatted comments.  The closing comment marker for
-kernel-doc comments can be either "*/" or "**/".
+kernel-doc comments can be either "*/" or "**/", but "*/" is
+preferred in the Linux kernel tree.
 
 Kernel-doc comments should be placed just before the function
 or data structure being described.
@@ -63,7 +64,7 @@ Example kernel-doc function comment:
  * comment lines.
  *
  * The longer description can have multiple paragraphs.
- **/
+ */
 
 The first line, with the short description, must be on a single line.
 
@@ -85,7 +86,7 @@ Example kernel-doc data structure comment.
  *		perhaps with more lines and words.
  *
  * Longer description of this structure.
- **/
+ */
 
 The kernel-doc function comments describe each parameter to the
 function, in order, with the @name lines.

trunk/Documentation/kernel-parameters.txt

@@ -937,6 +937,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 
 	intel_iommu=	[DMAR] Intel IOMMU driver (DMAR) option
+		on
+			Enable intel iommu driver.
 		off
 			Disable intel iommu driver.
 		igfx_off [Default Off]

trunk/Documentation/tracers/mmiotrace.txt

@@ -78,12 +78,10 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If
 events were lost, the trace is incomplete. You should enlarge the buffers and
 try again. Buffers are enlarged by first seeing how large the current buffers
 are:
-$ cat /debug/tracing/trace_entries
+$ cat /debug/tracing/buffer_size_kb
 gives you a number. Approximately double this number and write it back, for
 instance:
-$ echo 0 > /debug/tracing/tracing_enabled
-$ echo 128000 > /debug/tracing/trace_entries
-$ echo 1 > /debug/tracing/tracing_enabled
+$ echo 128000 > /debug/tracing/buffer_size_kb
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also