ARM: clps711x: Combine header files into one for clps711x-targets

Current ARM7 Cirrus Logic product line contains only 3 cpu.
EP7312 - Fully functional.
EP7309 - Missing SDRAM interface.
EP7311 - Missing DAI.
It makes no sense to separate the header files to identify these differences,
it is only necessary to keep in mind the presence or lack of any features of
a specific CPU when writing code.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/include/asm/hardware/clps7111.h

@@ -27,9 +27,11 @@
 
 #define PADR		(0x0000)
 #define PBDR		(0x0001)
+#define PCDR		(0x0002)
 #define PDDR		(0x0003)
 #define PADDR		(0x0040)
 #define PBDDR		(0x0041)
+#define PCDDR		(0x0042)
 #define PDDDR		(0x0043)
 #define PEDR		(0x0080)
 #define PEDDR		(0x00c0)
@@ -76,6 +78,18 @@
 #define SS2POP		(0x16c0)
 #define KBDEOI		(0x1700)
 
+#define DAIR		(0x2000)
+#define DAIR0		(0x2040)
+#define DAIDR1		(0x2080)
+#define DAIDR2		(0x20c0)
+#define DAISR		(0x2100)
+#define SYSCON3		(0x2200)
+#define INTSR3		(0x2240)
+#define INTMR3		(0x2280)
+#define LEDFLSH		(0x22c0)
+#define SDCONF		(0x2300)
+#define SDRFPR		(0x2340)
+
 /* common bits: SYSCON1 / SYSCON2 */
 #define SYSCON_UARTEN		(1 << 8)
 
@@ -172,4 +186,49 @@
 #define SYNCIO_SMCKEN		(1 << 13)
 #define SYNCIO_TXFRMEN		(1 << 14)
 
+#define DAIR_DAIEN		(1 << 16)
+#define DAIR_ECS		(1 << 17)
+#define DAIR_LCTM		(1 << 19)
+#define DAIR_LCRM		(1 << 20)
+#define DAIR_RCTM		(1 << 21)
+#define DAIR_RCRM		(1 << 22)
+#define DAIR_LBM		(1 << 23)
+
+#define DAIDR2_FIFOEN		(1 << 15)
+#define DAIDR2_FIFOLEFT		(0x0d << 16)
+#define DAIDR2_FIFORIGHT	(0x11 << 16)
+
+#define DAISR_RCTS		(1 << 0)
+#define DAISR_RCRS		(1 << 1)
+#define DAISR_LCTS		(1 << 2)
+#define DAISR_LCRS		(1 << 3)
+#define DAISR_RCTU		(1 << 4)
+#define DAISR_RCRO		(1 << 5)
+#define DAISR_LCTU		(1 << 6)
+#define DAISR_LCRO		(1 << 7)
+#define DAISR_RCNF		(1 << 8)
+#define DAISR_RCNE		(1 << 9)
+#define DAISR_LCNF		(1 << 10)
+#define DAISR_LCNE		(1 << 11)
+#define DAISR_FIFO		(1 << 12)
+
+#define SYSCON3_ADCCON		(1 << 0)
+#define SYSCON3_DAISEL		(1 << 3)
+#define SYSCON3_ADCCKNSEN	(1 << 4)
+#define SYSCON3_FASTWAKE	(1 << 8)
+#define SYSCON3_DAIEN		(1 << 9)
+
+#define SDCONF_ACTIVE		(1 << 10)
+#define SDCONF_CLKCTL		(1 << 9)
+#define SDCONF_WIDTH_4		(0 << 7)
+#define SDCONF_WIDTH_8		(1 << 7)
+#define SDCONF_WIDTH_16		(2 << 7)
+#define SDCONF_WIDTH_32		(3 << 7)
+#define SDCONF_SIZE_16		(0 << 5)
+#define SDCONF_SIZE_64		(1 << 5)
+#define SDCONF_SIZE_128		(2 << 5)
+#define SDCONF_SIZE_256		(3 << 5)
+#define SDCONF_CASLAT_2		(2)
+#define SDCONF_CASLAT_3		(3)
+
 #endif /* __ASM_HARDWARE_CLPS7111_H */

arch/arm/mach-clps711x/Kconfig

@@ -1,6 +1,6 @@
 if ARCH_CLPS711X
 
-menu "CLPS711X/EP721X Implementations"
+menu "CLPS711X/EP721X/EP731X Implementations"
 
 config ARCH_AUTCPU12
 	bool "AUTCPU12"
@@ -45,26 +45,13 @@ config ARCH_P720T
 config ARCH_FORTUNET
 	bool "FORTUNET"
 
-# XXX Maybe these should indicate register compatibility
-# instead of being mutually exclusive.
-config ARCH_EP7211
-	bool
-	depends on ARCH_EDB7211
-	default y
-
-config ARCH_EP7212
-	bool
-	depends on ARCH_P720T || ARCH_CEIVA
-	default y
-
 config EP72XX_ROM_BOOT
-	bool "EP72xx ROM boot"
-	depends on ARCH_EP7211 || ARCH_EP7212
-	---help---
+	bool "EP721x/EP731x ROM boot"
+	help
 	  If you say Y here, your CLPS711x-based kernel will use the bootstrap
 	  mode memory map instead of the normal memory map.
 
-	  Processors derived from the Cirrus CLPS-711X core support two boot
+	  Processors derived from the Cirrus CLPS711X core support two boot
 	  modes.  Normal mode boots from the external memory device at CS0.
 	  Bootstrap mode rearranges parts of the memory map, placing an
 	  internal 128 byte bootstrap ROM at CS0.  This option performs the

arch/arm/mach-clps711x/include/mach/hardware.h

@@ -61,32 +61,11 @@
 #define CS7_PHYS_BASE		(0x00000000)
 #endif
 
-#if defined (CONFIG_ARCH_EP7211)
-
-#include <asm/hardware/ep7211.h>
-
-#elif defined (CONFIG_ARCH_EP7212)
-
-#include <asm/hardware/ep7212.h>
-
-#endif
-
 #define SYSPLD_VIRT_BASE	0xfe000000
 #define SYSPLD_BASE		SYSPLD_VIRT_BASE
 
-#if  defined (CONFIG_ARCH_AUTCPU12)
-
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-#endif
-
-
 #if defined (CONFIG_ARCH_CDB89712)
 
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
 #define ETHER_START      0x20000000
 #define ETHER_SIZE       0x1000
 #define ETHER_BASE       0xfe000000
@@ -149,8 +128,6 @@
 
 #if defined (CONFIG_ARCH_CEIVA)
 
-#include <asm/hardware/ep7212.h>
-
 /*
  * The two flash banks are wired to chip selects 0 and 1. This is the mapping
  * for them.

drivers/net/irda/Kconfig

@@ -211,8 +211,8 @@ config KINGSUN_DONGLE
 	  kingsun-sir.
 
 config EP7211_DONGLE
-	tristate "EP7211 I/R support"
-	depends on IRTTY_SIR && ARCH_EP7211 && IRDA && EXPERIMENTAL
+	tristate "Cirrus Logic clps711x I/R support"
+	depends on IRTTY_SIR && ARCH_CLPS711X && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Cirrus logic
 	  EP7211 chipset's infrared module.