Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/torvalds/linux

Resolved conflicts:
  fs/xfs/xfs_trans_priv.h:
    - deleted struct xfs_ail field xa_flags
    - kept field xa_log_flush in struct xfs_ail
  fs/xfs/xfs_trans_ail.c:
    - in xfsaild_push(), in XFS_ITEM_PUSHBUF case, replaced
      "flush_log = 1" with "ailp->xa_log_flush++"

Signed-off-by: Alex Elder <aelder@sgi.com>

Documentation/kernel-parameters.txt

@@ -2706,10 +2706,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			functions are at fixed addresses, they make nice
 			targets for exploits that can control RIP.
 
-			emulate     [default] Vsyscalls turn into traps and are
-			            emulated reasonably safely.
+			emulate     Vsyscalls turn into traps and are emulated
+			            reasonably safely.
 
-			native      Vsyscalls are native syscall instructions.
+			native      [default] Vsyscalls are native syscall
+			            instructions.
 			            This is a little bit faster than trapping
 			            and makes a few dynamic recompilers work
 			            better than they would in emulation mode.

Documentation/networking/scaling.txt

@@ -27,7 +27,7 @@ applying a filter to each packet that assigns it to one of a small number
 of logical flows. Packets for each flow are steered to a separate receive
 queue, which in turn can be processed by separate CPUs. This mechanism is
 generally known as “Receive-side Scaling” (RSS). The goal of RSS and
-the other scaling techniques to increase performance uniformly.
+the other scaling techniques is to increase performance uniformly.
 Multi-queue distribution can also be used for traffic prioritization, but
 that is not the focus of these techniques.
 
@@ -186,10 +186,10 @@ are steered using plain RPS. Multiple table entries may point to the
 same CPU. Indeed, with many flows and few CPUs, it is very likely that
 a single application thread handles flows with many different flow hashes.
 
-rps_sock_table is a global flow table that contains the *desired* CPU for
-flows: the CPU that is currently processing the flow in userspace. Each
-table value is a CPU index that is updated during calls to recvmsg and
-sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
+rps_sock_flow_table is a global flow table that contains the *desired* CPU
+for flows: the CPU that is currently processing the flow in userspace.
+Each table value is a CPU index that is updated during calls to recvmsg
+and sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
 and tcp_splice_read()).
 
 When the scheduler moves a thread to a new CPU while it has outstanding

MAINTAINERS

@@ -6366,10 +6366,10 @@ F:	net/ipv4/tcp_lp.c
 
 TEGRA SUPPORT
 M:	Colin Cross <ccross@android.com>
-M:	Erik Gilling <konkers@android.com>
 M:	Olof Johansson <olof@lixom.net>
+M:	Stephen Warren <swarren@nvidia.com>
 L:	linux-tegra@vger.kernel.org
-T:	git git://android.git.kernel.org/kernel/tegra.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra.git
 S:	Supported
 F:	arch/arm/mach-tegra
 

arch/arm/common/vic.c

@@ -259,7 +259,6 @@ static void __init vic_disable(void __iomem *base)
 	writel(0, base + VIC_INT_SELECT);
 	writel(0, base + VIC_INT_ENABLE);
 	writel(~0, base + VIC_INT_ENABLE_CLEAR);
-	writel(0, base + VIC_IRQ_STATUS);
 	writel(0, base + VIC_ITCR);
 	writel(~0, base + VIC_INT_SOFT_CLEAR);
 }

arch/arm/include/asm/localtimer.h

@@ -10,6 +10,8 @@
 #ifndef __ASM_ARM_LOCALTIMER_H
 #define __ASM_ARM_LOCALTIMER_H
 
+#include <linux/errno.h>
+
 struct clock_event_device;
 
 /*

arch/arm/kernel/perf_event_v7.c

@@ -321,8 +321,8 @@ static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
 	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
 	[PERF_COUNT_HW_INSTRUCTIONS]	    =
 					ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_COHERENT_LINE_HIT,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = ARMV7_PERFCTR_COHERENT_LINE_MISS,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_DCACHE_ACCESS,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = ARMV7_PERFCTR_DCACHE_REFILL,
 	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
 	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
 	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,

arch/arm/mach-omap2/board-2430sdp.c

@@ -193,7 +193,8 @@ static int __init omap2430_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
 			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
-	omap2_pmic_init("twl4030", &sdp2430_twldata);
+	omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+			&sdp2430_twldata);
 	return 0;
 }
 

arch/arm/mach-omap2/hsmmc.c

@@ -137,8 +137,7 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot,
 	 */
 	reg = omap4_ctrl_pad_readl(control_pbias_offset);
 	reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
-		OMAP4_MMC1_PWRDNZ_MASK |
-		OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+		OMAP4_MMC1_PWRDNZ_MASK);
 	omap4_ctrl_pad_writel(reg, control_pbias_offset);
 }
 
@@ -156,8 +155,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
 		else
 			reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK;
 		reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
-			OMAP4_MMC1_PWRDNZ_MASK |
-			OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+			OMAP4_MMC1_PWRDNZ_MASK);
 		omap4_ctrl_pad_writel(reg, control_pbias_offset);
 
 		timeout = jiffies + msecs_to_jiffies(5);
@@ -171,16 +169,14 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
 		if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
 			pr_err("Pbias Voltage is not same as LDO\n");
 			/* Caution : On VMODE_ERROR Power Down MMC IO */
-			reg &= ~(OMAP4_MMC1_PWRDNZ_MASK |
-				OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+			reg &= ~(OMAP4_MMC1_PWRDNZ_MASK);
 			omap4_ctrl_pad_writel(reg, control_pbias_offset);
 		}
 	} else {
 		reg = omap4_ctrl_pad_readl(control_pbias_offset);
 		reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
 			OMAP4_MMC1_PWRDNZ_MASK |
-			OMAP4_MMC1_PBIASLITE_VMODE_MASK |
-			OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+			OMAP4_MMC1_PBIASLITE_VMODE_MASK);
 		omap4_ctrl_pad_writel(reg, control_pbias_offset);
 	}
 }

arch/arm/mach-omap2/usb-musb.c

@@ -137,9 +137,6 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	musb_plat.mode = board_data->mode;
 	musb_plat.extvbus = board_data->extvbus;
 
-	if (cpu_is_omap44xx())
-		omap4430_phy_init(dev);
-
 	if (cpu_is_omap3517() || cpu_is_omap3505()) {
 		oh_name = "am35x_otg_hs";
 		name = "musb-am35x";

arch/arm/mach-tegra/cpu-tegra.c

@@ -32,7 +32,6 @@
 
 #include <asm/system.h>
 
-#include <mach/hardware.h>
 #include <mach/clk.h>
 
 /* Frequency table index must be sequential starting at 0 */

arch/arm/mach-ux500/Kconfig

@@ -6,6 +6,7 @@ config UX500_SOC_COMMON
 	select ARM_GIC
 	select HAS_MTU
 	select ARM_ERRATA_753970
+	select ARM_ERRATA_754322
 
 menu "Ux500 SoC"
 

arch/arm/mm/init.c

@@ -496,6 +496,13 @@ static void __init free_unused_memmap(struct meminfo *mi)
 		 */
 		bank_start = min(bank_start,
 				 ALIGN(prev_bank_end, PAGES_PER_SECTION));
+#else
+		/*
+		 * Align down here since the VM subsystem insists that the
+		 * memmap entries are valid from the bank start aligned to
+		 * MAX_ORDER_NR_PAGES.
+		 */
+		bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES);
 #endif
 		/*
 		 * If we had a previous bank, and there is a space

arch/mips/Kconfig

@@ -24,6 +24,7 @@ config MIPS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select HAVE_ARCH_JUMP_LABEL
+	select IRQ_FORCED_THREADING
 
 menu "Machine selection"
 
@@ -722,6 +723,7 @@ config CAVIUM_OCTEON_SIMULATOR
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_HOTPLUG_CPU
 	select SYS_HAS_CPU_CAVIUM_OCTEON
+	select HOLES_IN_ZONE
 	help
 	  The Octeon simulator is software performance model of the Cavium
 	  Octeon Processor. It supports simulating Octeon processors on x86
@@ -744,6 +746,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 	select ZONE_DMA32
 	select USB_ARCH_HAS_OHCI
 	select USB_ARCH_HAS_EHCI
+	select HOLES_IN_ZONE
 	help
 	  This option supports all of the Octeon reference boards from Cavium
 	  Networks. It builds a kernel that dynamically determines the Octeon
@@ -973,6 +976,9 @@ config ISA_DMA_API
 config GENERIC_GPIO
 	bool
 
+config HOLES_IN_ZONE
+	bool
+
 #
 # Endianess selection.  Sufficiently obscure so many users don't know what to
 # answer,so we try hard to limit the available choices.  Also the use of a

arch/mips/alchemy/common/platform.c

@@ -492,7 +492,7 @@ static void __init alchemy_setup_macs(int ctype)
 		memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
 
 	ret = platform_device_register(&au1xxx_eth0_device);
-	if (!ret)
+	if (ret)
 		printk(KERN_INFO "Alchemy: failed to register MAC0\n");
 
 

arch/mips/alchemy/common/power.c

@@ -158,15 +158,21 @@ static void restore_core_regs(void)
 
 void au_sleep(void)
 {
-	int cpuid = alchemy_get_cputype();
-	if (cpuid != ALCHEMY_CPU_UNKNOWN) {
-		save_core_regs();
-		if (cpuid <= ALCHEMY_CPU_AU1500)
-			alchemy_sleep_au1000();
-		else if (cpuid <= ALCHEMY_CPU_AU1200)
-			alchemy_sleep_au1550();
-		restore_core_regs();
+	save_core_regs();
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		alchemy_sleep_au1000();
+		break;
+	case ALCHEMY_CPU_AU1550:
+	case ALCHEMY_CPU_AU1200:
+		alchemy_sleep_au1550();
+		break;
 	}
+
+	restore_core_regs();
 }
 
 #endif	/* CONFIG_PM */

arch/mips/alchemy/devboards/bcsr.c

@@ -89,8 +89,12 @@ static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d)
 {
 	unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT);
 
+	disable_irq_nosync(irq);
+
 	for ( ; bisr; bisr &= bisr - 1)
 		generic_handle_irq(bcsr_csc_base + __ffs(bisr));
+
+	enable_irq(irq);
 }
 
 /* NOTE: both the enable and mask bits must be cleared, otherwise the

arch/mips/alchemy/devboards/db1200/setup.c

@@ -23,13 +23,6 @@ void __init board_setup(void)
 	unsigned long freq0, clksrc, div, pfc;
 	unsigned short whoami;
 
-	/* Set Config[OD] (disable overlapping bus transaction):
-	 * This gets rid of a _lot_ of spurious interrupts (especially
-	 * wrt. IDE); but incurs ~10% performance hit in some
-	 * cpu-bound applications.
-	 */
-	set_c0_config(1 << 19);
-
 	bcsr_init(DB1200_BCSR_PHYS_ADDR,
 		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
 

arch/mips/ar7/irq.c

@@ -98,7 +98,8 @@ static struct irq_chip ar7_sec_irq_type = {
 
 static struct irqaction ar7_cascade_action = {
 	.handler = no_action,
-	.name = "AR7 cascade interrupt"
+	.name = "AR7 cascade interrupt",
+	.flags = IRQF_NO_THREAD,
 };
 
 static void __init ar7_irq_init(int base)

arch/mips/bcm63xx/irq.c

@@ -222,6 +222,7 @@ static struct irq_chip bcm63xx_external_irq_chip = {
 static struct irqaction cpu_ip2_cascade_action = {
 	.handler	= no_action,
 	.name		= "cascade_ip2",
+	.flags		= IRQF_NO_THREAD,
 };
 
 void __init arch_init_irq(void)

arch/mips/cobalt/irq.c

@@ -48,6 +48,7 @@ asmlinkage void plat_irq_dispatch(void)
 static struct irqaction cascade = {
 	.handler	= no_action,
 	.name		= "cascade",
+	.flags		= IRQF_NO_THREAD,
 };
 
 void __init arch_init_irq(void)

arch/mips/dec/setup.c

@@ -101,20 +101,24 @@ int cpu_fpu_mask = DEC_CPU_IRQ_MASK(DEC_CPU_INR_FPU);
 static struct irqaction ioirq = {
 	.handler = no_action,
 	.name = "cascade",
+	.flags = IRQF_NO_THREAD,
 };
 static struct irqaction fpuirq = {
 	.handler = no_action,
 	.name = "fpu",
+	.flags = IRQF_NO_THREAD,
 };
 
 static struct irqaction busirq = {
 	.flags = IRQF_DISABLED,
 	.name = "bus error",
+	.flags = IRQF_NO_THREAD,
 };
 
 static struct irqaction haltirq = {
 	.handler = dec_intr_halt,
 	.name = "halt",
+	.flags = IRQF_NO_THREAD,
 };
 
 

arch/mips/emma/markeins/irq.c

@@ -169,7 +169,7 @@ void emma2rh_gpio_irq_init(void)
 
 static struct irqaction irq_cascade = {
 	   .handler = no_action,
-	   .flags = 0,
+	   .flags = IRQF_NO_THREAD,
 	   .name = "cascade",
 	   .dev_id = NULL,
 	   .next = NULL,

arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h

@@ -54,7 +54,6 @@
 #define cpu_has_mips_r2_exec_hazard 0
 #define cpu_has_dsp		0
 #define cpu_has_mipsmt		0
-#define cpu_has_userlocal	0
 #define cpu_has_vint		0
 #define cpu_has_veic		0
 #define cpu_hwrena_impl_bits	0xc0000000

arch/mips/include/asm/mach-powertv/dma-coherence.h

@@ -13,7 +13,6 @@
 #define __ASM_MACH_POWERTV_DMA_COHERENCE_H
 
 #include <linux/sched.h>
-#include <linux/version.h>
 #include <linux/device.h>
 #include <asm/mach-powertv/asic.h>
 

arch/mips/include/asm/stackframe.h

@@ -195,9 +195,9 @@
 		 * to cover the pipeline delay.
 		 */
 		.set	mips32
-		mfc0	v1, CP0_TCSTATUS
+		mfc0	k0, CP0_TCSTATUS
 		.set	mips0
-		LONG_S	v1, PT_TCSTATUS(sp)
+		LONG_S	k0, PT_TCSTATUS(sp)
 #endif /* CONFIG_MIPS_MT_SMTC */
 		LONG_S	$4, PT_R4(sp)
 		LONG_S	$5, PT_R5(sp)